Recuperación de plásticos residuales para el diseño y conformación de elementos constructivos de un sistema que facilite mejoras de viviendas económicas como aporte a lo sustentabl...
- Autores
- Espinosa, Ana E.; D'Alleva, A.; Avendaño, M.; Quaglino Lagger, M. C.; Fideleff, Sofía; Foresi, J. P.; Aradas Díaz, María Elena
- Año de publicación
- 2018
- Idioma
- español castellano
- Tipo de recurso
- artículo
- Estado
- versión publicada
- Descripción
- Fil: Espinosa, Ana E. Pontificia Universidad Católica Argentina. Facultad de Química e Ingeniería. Centro Franciscano de Estudios y Desarrollo Regional; Argentina
Fil: D'Alleva, A. Pontificia Universidad Católica Argentina. Facultad de Química e Ingeniería. Centro Franciscano de Estudios y Desarrollo Regional; Argentina
Fil: Avendaño, M. Pontificia Universidad Católica Argentina. Facultad de Química e Ingeniería. Centro Franciscano de Estudios y Desarrollo Regional; Argentina
Fil: Quaglino Lagger, M. C. Pontificia Universidad Católica Argentina. Facultad de Química e Ingeniería. Centro Franciscano de Estudios y Desarrollo Regional; Argentina
Fil: Fideleff, S. Pontificia Universidad Católica Argentina. Facultad de Química e Ingeniería. Centro Franciscano de Estudios y Desarrollo Regional; Argentina
Fil: Foresi, J. P. Pontificia Universidad Católica Argentina. Facultad de Química e Ingeniería. Centro Franciscano de Estudios y Desarrollo Regional; Argentina
Fil: Aradas Díaz, María Elena. Pontificia Universidad Católica Argentina. Facultad de Química e Ingeniería. Centro Franciscano de Estudios y Desarrollo Regional; Argentina
Abstract: Within the framework of the research project on the recycling of plastic waste from 500 ml bottles of water, soft drinks and flavored waters with the objective of using them as materials and / or elements incorporated into construction processes as a viable alternative that allows contribute to improve the internal environmental quality of housing at social risk in an economic and sustainable way. The possibility of managing and giving use to the quantity of plastic bottles circulating in our faculties which currently end up in sanitary landfills without utility was tested. In order to carry out the technology transfer the project was linked to CEFEDER, where with the development of professional practices in solidarity -PPSo- it was agreed to collect data from surveys conducted by students from the EETPI No. 2076 Private Technical Education School located in the "San Francisquito" neighborhood with its subsequent analysis and interpretation. The task developed focused on services, infrastructure and quality of life conditions of neighborhood residents, adopting a study radius. From the analysis of the data obtained and linking to the research object, it was found the possibility of reproducing and improving a device provided by the students of the institution to crush bottles for daily consumer drinks whose material is plastic and then be introduced in construction processes as cladding elements in exterior walls to improve characteristics of their materiality. These improvements result in better thermal and hydraulic insulation. The analysis of the situation allowed us to find a possible solution for the plastic waste of our faculty, of the School, of the Neighborhood and to provide the most needy sectors with a solution to improve the inner wellbeing of their habitats with a low cost and appropriate techniques users of the practice. To himself with the report of the ODSA, elevated by the Argentine Catholic University, denominated "multidimensional poverty", those data were crossed with those obtained by the students in their surveys, showing the same characteristics in terms of habitat conditions and quality of life in other provinces and territories of large cities. As active members of the UCA community, being observers and actors committed to their vision and mission we see ourselves in the duty to manage our waste and provide technical solutions to the most vulnerable sectors. The scope of this research was focused on the field of survey and analysis of similar experiences, research on materials that are marketed and construction systems that have now incorporated recycled plastics as raw materials or inputs. The results that they have obtained for the purpose of establishing comparative plans are taken into account. We progressed in deepening theoretical-methodological content by designing a feasible proposal to execute, which should be consolidated into a prototype that allows us to test its performance verifying that the theoretical statement is fulfilled in the real event or that it should be adjusted on the practice concrete. - Fuente
- Energeia, Vol. 15, Nº 15, 2018
ISSN 1668-1622 - Materia
-
RECICLAJE
PLASTICOS
GESTION AMBIENTAL - Nivel de accesibilidad
- acceso abierto
- Condiciones de uso
- https://creativecommons.org/licenses/by-nc-sa/4.0/
- Repositorio
- Institución
- Pontificia Universidad Católica Argentina
- OAI Identificador
- oai:ucacris:123456789/5872
Ver los metadatos del registro completo
id |
RIUCA_a7c0ffc58d1117be95673502b042c3c1 |
---|---|
oai_identifier_str |
oai:ucacris:123456789/5872 |
network_acronym_str |
RIUCA |
repository_id_str |
2585 |
network_name_str |
Repositorio Institucional (UCA) |
spelling |
Recuperación de plásticos residuales para el diseño y conformación de elementos constructivos de un sistema que facilite mejoras de viviendas económicas como aporte a lo sustentable : analizado como un problema de ingenieríaEspinosa, Ana E.D'Alleva, A.Avendaño, M.Quaglino Lagger, M. C.Fideleff, SofíaForesi, J. P.Aradas Díaz, María ElenaRECICLAJEPLASTICOSGESTION AMBIENTALFil: Espinosa, Ana E. Pontificia Universidad Católica Argentina. Facultad de Química e Ingeniería. Centro Franciscano de Estudios y Desarrollo Regional; ArgentinaFil: D'Alleva, A. Pontificia Universidad Católica Argentina. Facultad de Química e Ingeniería. Centro Franciscano de Estudios y Desarrollo Regional; ArgentinaFil: Avendaño, M. Pontificia Universidad Católica Argentina. Facultad de Química e Ingeniería. Centro Franciscano de Estudios y Desarrollo Regional; ArgentinaFil: Quaglino Lagger, M. C. Pontificia Universidad Católica Argentina. Facultad de Química e Ingeniería. Centro Franciscano de Estudios y Desarrollo Regional; ArgentinaFil: Fideleff, S. Pontificia Universidad Católica Argentina. Facultad de Química e Ingeniería. Centro Franciscano de Estudios y Desarrollo Regional; ArgentinaFil: Foresi, J. P. Pontificia Universidad Católica Argentina. Facultad de Química e Ingeniería. Centro Franciscano de Estudios y Desarrollo Regional; ArgentinaFil: Aradas Díaz, María Elena. Pontificia Universidad Católica Argentina. Facultad de Química e Ingeniería. Centro Franciscano de Estudios y Desarrollo Regional; ArgentinaAbstract: Within the framework of the research project on the recycling of plastic waste from 500 ml bottles of water, soft drinks and flavored waters with the objective of using them as materials and / or elements incorporated into construction processes as a viable alternative that allows contribute to improve the internal environmental quality of housing at social risk in an economic and sustainable way. The possibility of managing and giving use to the quantity of plastic bottles circulating in our faculties which currently end up in sanitary landfills without utility was tested. In order to carry out the technology transfer the project was linked to CEFEDER, where with the development of professional practices in solidarity -PPSo- it was agreed to collect data from surveys conducted by students from the EETPI No. 2076 Private Technical Education School located in the "San Francisquito" neighborhood with its subsequent analysis and interpretation. The task developed focused on services, infrastructure and quality of life conditions of neighborhood residents, adopting a study radius. From the analysis of the data obtained and linking to the research object, it was found the possibility of reproducing and improving a device provided by the students of the institution to crush bottles for daily consumer drinks whose material is plastic and then be introduced in construction processes as cladding elements in exterior walls to improve characteristics of their materiality. These improvements result in better thermal and hydraulic insulation. The analysis of the situation allowed us to find a possible solution for the plastic waste of our faculty, of the School, of the Neighborhood and to provide the most needy sectors with a solution to improve the inner wellbeing of their habitats with a low cost and appropriate techniques users of the practice. To himself with the report of the ODSA, elevated by the Argentine Catholic University, denominated "multidimensional poverty", those data were crossed with those obtained by the students in their surveys, showing the same characteristics in terms of habitat conditions and quality of life in other provinces and territories of large cities. As active members of the UCA community, being observers and actors committed to their vision and mission we see ourselves in the duty to manage our waste and provide technical solutions to the most vulnerable sectors. The scope of this research was focused on the field of survey and analysis of similar experiences, research on materials that are marketed and construction systems that have now incorporated recycled plastics as raw materials or inputs. The results that they have obtained for the purpose of establishing comparative plans are taken into account. We progressed in deepening theoretical-methodological content by designing a feasible proposal to execute, which should be consolidated into a prototype that allows us to test its performance verifying that the theoretical statement is fulfilled in the real event or that it should be adjusted on the practice concrete.Universidad Católica Argentina. Facultad de Química e Ingeniería "Fray Rogelio Bacon". Departamento de Investigación Institucional2018info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionhttp://purl.org/coar/resource_type/c_6501info:ar-repo/semantics/articuloapplication/pdfhttps://repositorio.uca.edu.ar/handle/123456789/58721668-1622Espinosa, A. E. et al. Recuperación de plásticos residuales para el diseño y conformación de elementos constructivos de un sistema que facilite mejoras de viviendas económicas como aporte a lo sustentable : analizado como un problema de ingeniería [en línea]. Energeia, 15(15), 2018. Disponible en: https://repositorio.uca.edu.ar/handle/123456789/5872Energeia, Vol. 15, Nº 15, 2018ISSN 1668-1622reponame:Repositorio Institucional (UCA)instname:Pontificia Universidad Católica Argentinaspainfo:eu-repo/semantics/openAccesshttps://creativecommons.org/licenses/by-nc-sa/4.0/2025-07-03T10:56:13Zoai:ucacris:123456789/5872instacron:UCAInstitucionalhttps://repositorio.uca.edu.ar/Universidad privadaNo correspondehttps://repositorio.uca.edu.ar/oaiclaudia_fernandez@uca.edu.arArgentinaNo correspondeNo correspondeNo correspondeopendoar:25852025-07-03 10:56:13.517Repositorio Institucional (UCA) - Pontificia Universidad Católica Argentinafalse |
dc.title.none.fl_str_mv |
Recuperación de plásticos residuales para el diseño y conformación de elementos constructivos de un sistema que facilite mejoras de viviendas económicas como aporte a lo sustentable : analizado como un problema de ingeniería |
title |
Recuperación de plásticos residuales para el diseño y conformación de elementos constructivos de un sistema que facilite mejoras de viviendas económicas como aporte a lo sustentable : analizado como un problema de ingeniería |
spellingShingle |
Recuperación de plásticos residuales para el diseño y conformación de elementos constructivos de un sistema que facilite mejoras de viviendas económicas como aporte a lo sustentable : analizado como un problema de ingeniería Espinosa, Ana E. RECICLAJE PLASTICOS GESTION AMBIENTAL |
title_short |
Recuperación de plásticos residuales para el diseño y conformación de elementos constructivos de un sistema que facilite mejoras de viviendas económicas como aporte a lo sustentable : analizado como un problema de ingeniería |
title_full |
Recuperación de plásticos residuales para el diseño y conformación de elementos constructivos de un sistema que facilite mejoras de viviendas económicas como aporte a lo sustentable : analizado como un problema de ingeniería |
title_fullStr |
Recuperación de plásticos residuales para el diseño y conformación de elementos constructivos de un sistema que facilite mejoras de viviendas económicas como aporte a lo sustentable : analizado como un problema de ingeniería |
title_full_unstemmed |
Recuperación de plásticos residuales para el diseño y conformación de elementos constructivos de un sistema que facilite mejoras de viviendas económicas como aporte a lo sustentable : analizado como un problema de ingeniería |
title_sort |
Recuperación de plásticos residuales para el diseño y conformación de elementos constructivos de un sistema que facilite mejoras de viviendas económicas como aporte a lo sustentable : analizado como un problema de ingeniería |
dc.creator.none.fl_str_mv |
Espinosa, Ana E. D'Alleva, A. Avendaño, M. Quaglino Lagger, M. C. Fideleff, Sofía Foresi, J. P. Aradas Díaz, María Elena |
author |
Espinosa, Ana E. |
author_facet |
Espinosa, Ana E. D'Alleva, A. Avendaño, M. Quaglino Lagger, M. C. Fideleff, Sofía Foresi, J. P. Aradas Díaz, María Elena |
author_role |
author |
author2 |
D'Alleva, A. Avendaño, M. Quaglino Lagger, M. C. Fideleff, Sofía Foresi, J. P. Aradas Díaz, María Elena |
author2_role |
author author author author author author |
dc.subject.none.fl_str_mv |
RECICLAJE PLASTICOS GESTION AMBIENTAL |
topic |
RECICLAJE PLASTICOS GESTION AMBIENTAL |
dc.description.none.fl_txt_mv |
Fil: Espinosa, Ana E. Pontificia Universidad Católica Argentina. Facultad de Química e Ingeniería. Centro Franciscano de Estudios y Desarrollo Regional; Argentina Fil: D'Alleva, A. Pontificia Universidad Católica Argentina. Facultad de Química e Ingeniería. Centro Franciscano de Estudios y Desarrollo Regional; Argentina Fil: Avendaño, M. Pontificia Universidad Católica Argentina. Facultad de Química e Ingeniería. Centro Franciscano de Estudios y Desarrollo Regional; Argentina Fil: Quaglino Lagger, M. C. Pontificia Universidad Católica Argentina. Facultad de Química e Ingeniería. Centro Franciscano de Estudios y Desarrollo Regional; Argentina Fil: Fideleff, S. Pontificia Universidad Católica Argentina. Facultad de Química e Ingeniería. Centro Franciscano de Estudios y Desarrollo Regional; Argentina Fil: Foresi, J. P. Pontificia Universidad Católica Argentina. Facultad de Química e Ingeniería. Centro Franciscano de Estudios y Desarrollo Regional; Argentina Fil: Aradas Díaz, María Elena. Pontificia Universidad Católica Argentina. Facultad de Química e Ingeniería. Centro Franciscano de Estudios y Desarrollo Regional; Argentina Abstract: Within the framework of the research project on the recycling of plastic waste from 500 ml bottles of water, soft drinks and flavored waters with the objective of using them as materials and / or elements incorporated into construction processes as a viable alternative that allows contribute to improve the internal environmental quality of housing at social risk in an economic and sustainable way. The possibility of managing and giving use to the quantity of plastic bottles circulating in our faculties which currently end up in sanitary landfills without utility was tested. In order to carry out the technology transfer the project was linked to CEFEDER, where with the development of professional practices in solidarity -PPSo- it was agreed to collect data from surveys conducted by students from the EETPI No. 2076 Private Technical Education School located in the "San Francisquito" neighborhood with its subsequent analysis and interpretation. The task developed focused on services, infrastructure and quality of life conditions of neighborhood residents, adopting a study radius. From the analysis of the data obtained and linking to the research object, it was found the possibility of reproducing and improving a device provided by the students of the institution to crush bottles for daily consumer drinks whose material is plastic and then be introduced in construction processes as cladding elements in exterior walls to improve characteristics of their materiality. These improvements result in better thermal and hydraulic insulation. The analysis of the situation allowed us to find a possible solution for the plastic waste of our faculty, of the School, of the Neighborhood and to provide the most needy sectors with a solution to improve the inner wellbeing of their habitats with a low cost and appropriate techniques users of the practice. To himself with the report of the ODSA, elevated by the Argentine Catholic University, denominated "multidimensional poverty", those data were crossed with those obtained by the students in their surveys, showing the same characteristics in terms of habitat conditions and quality of life in other provinces and territories of large cities. As active members of the UCA community, being observers and actors committed to their vision and mission we see ourselves in the duty to manage our waste and provide technical solutions to the most vulnerable sectors. The scope of this research was focused on the field of survey and analysis of similar experiences, research on materials that are marketed and construction systems that have now incorporated recycled plastics as raw materials or inputs. The results that they have obtained for the purpose of establishing comparative plans are taken into account. We progressed in deepening theoretical-methodological content by designing a feasible proposal to execute, which should be consolidated into a prototype that allows us to test its performance verifying that the theoretical statement is fulfilled in the real event or that it should be adjusted on the practice concrete. |
description |
Fil: Espinosa, Ana E. Pontificia Universidad Católica Argentina. Facultad de Química e Ingeniería. Centro Franciscano de Estudios y Desarrollo Regional; Argentina |
publishDate |
2018 |
dc.date.none.fl_str_mv |
2018 |
dc.type.none.fl_str_mv |
info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion http://purl.org/coar/resource_type/c_6501 info:ar-repo/semantics/articulo |
format |
article |
status_str |
publishedVersion |
dc.identifier.none.fl_str_mv |
https://repositorio.uca.edu.ar/handle/123456789/5872 1668-1622 Espinosa, A. E. et al. Recuperación de plásticos residuales para el diseño y conformación de elementos constructivos de un sistema que facilite mejoras de viviendas económicas como aporte a lo sustentable : analizado como un problema de ingeniería [en línea]. Energeia, 15(15), 2018. Disponible en: https://repositorio.uca.edu.ar/handle/123456789/5872 |
url |
https://repositorio.uca.edu.ar/handle/123456789/5872 |
identifier_str_mv |
1668-1622 Espinosa, A. E. et al. Recuperación de plásticos residuales para el diseño y conformación de elementos constructivos de un sistema que facilite mejoras de viviendas económicas como aporte a lo sustentable : analizado como un problema de ingeniería [en línea]. Energeia, 15(15), 2018. Disponible en: https://repositorio.uca.edu.ar/handle/123456789/5872 |
dc.language.none.fl_str_mv |
spa |
language |
spa |
dc.rights.none.fl_str_mv |
info:eu-repo/semantics/openAccess https://creativecommons.org/licenses/by-nc-sa/4.0/ |
eu_rights_str_mv |
openAccess |
rights_invalid_str_mv |
https://creativecommons.org/licenses/by-nc-sa/4.0/ |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidad Católica Argentina. Facultad de Química e Ingeniería "Fray Rogelio Bacon". Departamento de Investigación Institucional |
publisher.none.fl_str_mv |
Universidad Católica Argentina. Facultad de Química e Ingeniería "Fray Rogelio Bacon". Departamento de Investigación Institucional |
dc.source.none.fl_str_mv |
Energeia, Vol. 15, Nº 15, 2018 ISSN 1668-1622 reponame:Repositorio Institucional (UCA) instname:Pontificia Universidad Católica Argentina |
reponame_str |
Repositorio Institucional (UCA) |
collection |
Repositorio Institucional (UCA) |
instname_str |
Pontificia Universidad Católica Argentina |
repository.name.fl_str_mv |
Repositorio Institucional (UCA) - Pontificia Universidad Católica Argentina |
repository.mail.fl_str_mv |
claudia_fernandez@uca.edu.ar |
_version_ |
1836638340744478720 |
score |
13.070432 |