SIM Regional Supplementary Comparison : SIM.L-S6. Calibration of gauge blocks by mechanical comparison

Autores
Viliesid, M.; Colín Castellanos, C.; Chávez, T.; Chaudhary, K. P.; Dvořáček, F.; Stoup, John; Santos Barros, W.; Vaudagna, L.; Morales, R.; Acquarone, A.; Carrasco, J.; Vega, M.; Salazar, M.; Gil, V.; Dimas, J.; Reyes, E.; Hamilton, F.; Reddock, T.; Durga, S.; Burton, T.
Año de publicación
2015
Idioma
inglés
Tipo de recurso
artículo
Estado
versión publicada
Descripción
This supplementary comparison concerns the calibration of gauge blocks by mechanical comparison, which is a technique of paramount importance as it is at the highest level in the traceability chain of length for most countries of the American Continent. This comparison is designed to support the submitted CMC claims of these countries. The measurand is the central length of several gauge blocks as defined in ISO 3650 and the circulated gauge blocks were used for two comparisons carried out in two stages: the first stage, SIM.L-K1:2007, Calibration of gauge blocks by optical interferometry (2007–2010); the gauge blocks were also measured by mechanical comparison for those NMI also participating in SIM.L-S6:2007; the second stage, SIM.L-S6:2007, Calibration of gauge blocks by mechanical comparison (2010–2011) for the participants that measured only by mechanical comparison. In this second comparison there were 16 participants, 14 from the Americas, and 2 invited NMIs from other regions. The circulation in the second stage had 10 participants.
Fil: Viliesid, M. Centro Nacional de Metrología (CENAM); México
Fil: Colín Castellanos, C. Centro Nacional de Metrología (CENAM); México
Fil: Chávez, T. Centro Nacional de Metrología (CENAM); México
Fil: Chaudhary, K. P. National Physical Laboratory (NPL); India
Fil: Dvořáček, F. Czech Metrology Institute (CMI); República Checa
Fil: Stoup, J. National Institute of Standards and Technology (NIST); Estados Unidos
Fil: Santos Barros, W. Instituto Nacional de Metrologia, Qualidade e Tecnologia (INMetro); Brasil
Fil: Vaudagna, L. Instituto Nacional de Tecnología Industrial (INTI); Argentina
Fil: Morales, R. Laboratorio Nacional de Longitud (DICTUC); Chile
Fil: Acquarone, A. Laboratorio Tecnológico del Uruguay (LATU); Uruguay
Fil: Carrasco, J. Servicio Nacional de Metrología (INDECOPI); Perú
Fil: Vega, M. Instituto Boliviano de Metrología (IBMetro); Bolivia
Fil: Salazar, M. Instituto Ecuatoriano de Normalización (INEN); Ecuador
Fil: Gil, V. Superintendencia de Industria y Comercio (SIC); Colombia
Fil: Dimas, J. Centro Nacional de Metrología de Panamá (CENAMEP); Panamá
Fil: Reyes, E. Laboratorio Costarricense de Metrología (LACOMET); Costa Rica
Fil: Hamilton, F. Trinidad and Tobago Bureau of Standards (TTBS); Trinidad y Tobago
Fil: Reddock, T. Trinidad and Tobago Bureau of Standards (TTBS); Trinidad y Tobago
Fil: Durga, S. Bureau of Standards Jamaica (BSJ); Jamaica
Fil: Burton, T. Bureau of Standards Jamaica (BSJ); Jamaica
Fuente
Metrología, 52
Materia
Sistema Interamericano de Metrología
Metrología
Calibración
Ensayos mecánicos
Interferometría
Patrones
Nivel de accesibilidad
acceso abierto
Condiciones de uso
https://creativecommons.org/licenses/by/3.0/
Repositorio
Repositorio Institucional del Instituto Nacional de Tecnología Industrial (INTI)
Institución
Instituto Nacional de Tecnología Industrial
OAI Identificador
nuevadc:Vaudagna2015SIM_pdf
Acceder
id RIINTI_823947a02d841943bc8ec8647154e7db
oai_identifier_str nuevadc:Vaudagna2015SIM_pdf
network_acronym_str RIINTI
repository_id_str
network_name_str Repositorio Institucional del Instituto Nacional de Tecnología Industrial (INTI)
spelling SIM Regional Supplementary Comparison : SIM.L-S6. Calibration of gauge blocks by mechanical comparisonViliesid, M.Colín Castellanos, C.Chávez, T.Chaudhary, K. P.Dvořáček, F.Stoup, JohnSantos Barros, W.Vaudagna, L.Morales, R.Acquarone, A.Carrasco, J.Vega, M.Salazar, M.Gil, V.Dimas, J.Reyes, E.Hamilton, F.Reddock, T.Durga, S.Burton, T.Sistema Interamericano de MetrologíaMetrologíaCalibraciónEnsayos mecánicosInterferometríaPatronesThis supplementary comparison concerns the calibration of gauge blocks by mechanical comparison, which is a technique of paramount importance as it is at the highest level in the traceability chain of length for most countries of the American Continent. This comparison is designed to support the submitted CMC claims of these countries. The measurand is the central length of several gauge blocks as defined in ISO 3650 and the circulated gauge blocks were used for two comparisons carried out in two stages: the first stage, SIM.L-K1:2007, Calibration of gauge blocks by optical interferometry (2007–2010); the gauge blocks were also measured by mechanical comparison for those NMI also participating in SIM.L-S6:2007; the second stage, SIM.L-S6:2007, Calibration of gauge blocks by mechanical comparison (2010–2011) for the participants that measured only by mechanical comparison. In this second comparison there were 16 participants, 14 from the Americas, and 2 invited NMIs from other regions. The circulation in the second stage had 10 participants.Fil: Viliesid, M. Centro Nacional de Metrología (CENAM); MéxicoFil: Colín Castellanos, C. Centro Nacional de Metrología (CENAM); MéxicoFil: Chávez, T. Centro Nacional de Metrología (CENAM); MéxicoFil: Chaudhary, K. P. National Physical Laboratory (NPL); IndiaFil: Dvořáček, F. Czech Metrology Institute (CMI); República ChecaFil: Stoup, J. National Institute of Standards and Technology (NIST); Estados UnidosFil: Santos Barros, W. Instituto Nacional de Metrologia, Qualidade e Tecnologia (INMetro); BrasilFil: Vaudagna, L. Instituto Nacional de Tecnología Industrial (INTI); ArgentinaFil: Morales, R. Laboratorio Nacional de Longitud (DICTUC); ChileFil: Acquarone, A. Laboratorio Tecnológico del Uruguay (LATU); UruguayFil: Carrasco, J. Servicio Nacional de Metrología (INDECOPI); PerúFil: Vega, M. Instituto Boliviano de Metrología (IBMetro); BoliviaFil: Salazar, M. Instituto Ecuatoriano de Normalización (INEN); EcuadorFil: Gil, V. Superintendencia de Industria y Comercio (SIC); ColombiaFil: Dimas, J. Centro Nacional de Metrología de Panamá (CENAMEP); PanamáFil: Reyes, E. Laboratorio Costarricense de Metrología (LACOMET); Costa RicaFil: Hamilton, F. Trinidad and Tobago Bureau of Standards (TTBS); Trinidad y TobagoFil: Reddock, T. Trinidad and Tobago Bureau of Standards (TTBS); Trinidad y TobagoFil: Durga, S. Bureau of Standards Jamaica (BSJ); JamaicaFil: Burton, T. Bureau of Standards Jamaica (BSJ); JamaicaIOP Publishing2015info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionhttp://purl.org/coar/resource_type/c_6501info:ar-repo/semantics/articuloapplication/pdfVaudagna2015SIM.pdfhttps://app.inti.gob.ar/greenstone3/sites/localsite/collect/nuevadc/index/assoc/Vaudagna.dir/doc.pdfMetrología, 52reponame:Repositorio Institucional del Instituto Nacional de Tecnología Industrial (INTI)instname:Instituto Nacional de Tecnología Industrialenginfo:eu-repo/semantics/openAccesshttps://creativecommons.org/licenses/by/3.0/openAccess2025-10-16T10:46:38Znuevadc:Vaudagna2015SIM_pdfinstacron:INTIInstitucionalhttps://app.inti.gob.ar/greenstone3/biblioOrganismo científico-tecnológicohttps://argentina.gob.ar/intihttps://app.inti.gob.ar/greenstone3/oaiserver?verb=Identifypfalcato@inti.gob.arArgentinaopendoar:2025-10-16 10:46:38.616Repositorio Institucional del Instituto Nacional de Tecnología Industrial (INTI) - Instituto Nacional de Tecnología Industrialfalse
dc.title.none.fl_str_mv SIM Regional Supplementary Comparison : SIM.L-S6. Calibration of gauge blocks by mechanical comparison
title SIM Regional Supplementary Comparison : SIM.L-S6. Calibration of gauge blocks by mechanical comparison
spellingShingle SIM Regional Supplementary Comparison : SIM.L-S6. Calibration of gauge blocks by mechanical comparison
Viliesid, M.
Sistema Interamericano de Metrología
Metrología
Calibración
Ensayos mecánicos
Interferometría
Patrones
title_short SIM Regional Supplementary Comparison : SIM.L-S6. Calibration of gauge blocks by mechanical comparison
title_full SIM Regional Supplementary Comparison : SIM.L-S6. Calibration of gauge blocks by mechanical comparison
title_fullStr SIM Regional Supplementary Comparison : SIM.L-S6. Calibration of gauge blocks by mechanical comparison
title_full_unstemmed SIM Regional Supplementary Comparison : SIM.L-S6. Calibration of gauge blocks by mechanical comparison
title_sort SIM Regional Supplementary Comparison : SIM.L-S6. Calibration of gauge blocks by mechanical comparison
dc.creator.none.fl_str_mv Viliesid, M.
Colín Castellanos, C.
Chávez, T.
Chaudhary, K. P.
Dvořáček, F.
Stoup, John
Santos Barros, W.
Vaudagna, L.
Morales, R.
Acquarone, A.
Carrasco, J.
Vega, M.
Salazar, M.
Gil, V.
Dimas, J.
Reyes, E.
Hamilton, F.
Reddock, T.
Durga, S.
Burton, T.
author Viliesid, M.
author_facet Viliesid, M.
Colín Castellanos, C.
Chávez, T.
Chaudhary, K. P.
Dvořáček, F.
Stoup, John
Santos Barros, W.
Vaudagna, L.
Morales, R.
Acquarone, A.
Carrasco, J.
Vega, M.
Salazar, M.
Gil, V.
Dimas, J.
Reyes, E.
Hamilton, F.
Reddock, T.
Durga, S.
Burton, T.
author_role author
author2 Colín Castellanos, C.
Chávez, T.
Chaudhary, K. P.
Dvořáček, F.
Stoup, John
Santos Barros, W.
Vaudagna, L.
Morales, R.
Acquarone, A.
Carrasco, J.
Vega, M.
Salazar, M.
Gil, V.
Dimas, J.
Reyes, E.
Hamilton, F.
Reddock, T.
Durga, S.
Burton, T.
author2_role author
author
author
author
author
author
author
author
author
author
author
author
author
author
author
author
author
author
author
dc.subject.none.fl_str_mv Sistema Interamericano de Metrología
Metrología
Calibración
Ensayos mecánicos
Interferometría
Patrones
topic Sistema Interamericano de Metrología
Metrología
Calibración
Ensayos mecánicos
Interferometría
Patrones
dc.description.none.fl_txt_mv This supplementary comparison concerns the calibration of gauge blocks by mechanical comparison, which is a technique of paramount importance as it is at the highest level in the traceability chain of length for most countries of the American Continent. This comparison is designed to support the submitted CMC claims of these countries. The measurand is the central length of several gauge blocks as defined in ISO 3650 and the circulated gauge blocks were used for two comparisons carried out in two stages: the first stage, SIM.L-K1:2007, Calibration of gauge blocks by optical interferometry (2007–2010); the gauge blocks were also measured by mechanical comparison for those NMI also participating in SIM.L-S6:2007; the second stage, SIM.L-S6:2007, Calibration of gauge blocks by mechanical comparison (2010–2011) for the participants that measured only by mechanical comparison. In this second comparison there were 16 participants, 14 from the Americas, and 2 invited NMIs from other regions. The circulation in the second stage had 10 participants.
Fil: Viliesid, M. Centro Nacional de Metrología (CENAM); México
Fil: Colín Castellanos, C. Centro Nacional de Metrología (CENAM); México
Fil: Chávez, T. Centro Nacional de Metrología (CENAM); México
Fil: Chaudhary, K. P. National Physical Laboratory (NPL); India
Fil: Dvořáček, F. Czech Metrology Institute (CMI); República Checa
Fil: Stoup, J. National Institute of Standards and Technology (NIST); Estados Unidos
Fil: Santos Barros, W. Instituto Nacional de Metrologia, Qualidade e Tecnologia (INMetro); Brasil
Fil: Vaudagna, L. Instituto Nacional de Tecnología Industrial (INTI); Argentina
Fil: Morales, R. Laboratorio Nacional de Longitud (DICTUC); Chile
Fil: Acquarone, A. Laboratorio Tecnológico del Uruguay (LATU); Uruguay
Fil: Carrasco, J. Servicio Nacional de Metrología (INDECOPI); Perú
Fil: Vega, M. Instituto Boliviano de Metrología (IBMetro); Bolivia
Fil: Salazar, M. Instituto Ecuatoriano de Normalización (INEN); Ecuador
Fil: Gil, V. Superintendencia de Industria y Comercio (SIC); Colombia
Fil: Dimas, J. Centro Nacional de Metrología de Panamá (CENAMEP); Panamá
Fil: Reyes, E. Laboratorio Costarricense de Metrología (LACOMET); Costa Rica
Fil: Hamilton, F. Trinidad and Tobago Bureau of Standards (TTBS); Trinidad y Tobago
Fil: Reddock, T. Trinidad and Tobago Bureau of Standards (TTBS); Trinidad y Tobago
Fil: Durga, S. Bureau of Standards Jamaica (BSJ); Jamaica
Fil: Burton, T. Bureau of Standards Jamaica (BSJ); Jamaica
description This supplementary comparison concerns the calibration of gauge blocks by mechanical comparison, which is a technique of paramount importance as it is at the highest level in the traceability chain of length for most countries of the American Continent. This comparison is designed to support the submitted CMC claims of these countries. The measurand is the central length of several gauge blocks as defined in ISO 3650 and the circulated gauge blocks were used for two comparisons carried out in two stages: the first stage, SIM.L-K1:2007, Calibration of gauge blocks by optical interferometry (2007–2010); the gauge blocks were also measured by mechanical comparison for those NMI also participating in SIM.L-S6:2007; the second stage, SIM.L-S6:2007, Calibration of gauge blocks by mechanical comparison (2010–2011) for the participants that measured only by mechanical comparison. In this second comparison there were 16 participants, 14 from the Americas, and 2 invited NMIs from other regions. The circulation in the second stage had 10 participants.
publishDate 2015
dc.date.none.fl_str_mv 2015
dc.type.none.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
http://purl.org/coar/resource_type/c_6501
info:ar-repo/semantics/articulo
format article
status_str publishedVersion
dc.identifier.none.fl_str_mv Vaudagna2015SIM.pdf
https://app.inti.gob.ar/greenstone3/sites/localsite/collect/nuevadc/index/assoc/Vaudagna.dir/doc.pdf
identifier_str_mv Vaudagna2015SIM.pdf
url https://app.inti.gob.ar/greenstone3/sites/localsite/collect/nuevadc/index/assoc/Vaudagna.dir/doc.pdf
dc.language.none.fl_str_mv eng
language eng
dc.rights.none.fl_str_mv info:eu-repo/semantics/openAccess
https://creativecommons.org/licenses/by/3.0/
openAccess
eu_rights_str_mv openAccess
rights_invalid_str_mv https://creativecommons.org/licenses/by/3.0/
openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv IOP Publishing
publisher.none.fl_str_mv IOP Publishing
dc.source.none.fl_str_mv Metrología, 52
reponame:Repositorio Institucional del Instituto Nacional de Tecnología Industrial (INTI)
instname:Instituto Nacional de Tecnología Industrial
reponame_str Repositorio Institucional del Instituto Nacional de Tecnología Industrial (INTI)
collection Repositorio Institucional del Instituto Nacional de Tecnología Industrial (INTI)
instname_str Instituto Nacional de Tecnología Industrial
repository.name.fl_str_mv Repositorio Institucional del Instituto Nacional de Tecnología Industrial (INTI) - Instituto Nacional de Tecnología Industrial
repository.mail.fl_str_mv pfalcato@inti.gob.ar
_version_ 1846147089284726784
score 12.712165

Publicaciones similares