Key Comparison : SIM.L-K3.2008. Calibration of angle standards. Report – Final

Autores
Vieira, L. H. Brum; Stone, J.; Viliesid, M.; Gastaldi, B. R.; Przybylska, J.; Chaudhary, K. P.
Año de publicación
2015
Idioma
inglés
Tipo de recurso
artículo
Estado
versión publicada
Descripción
In 2000, a key comparison, CCL-K3 (optical polygon and angle blocks) was started, piloted by NMISA. Based on it, in 2007, the SIM metrological region started a SIM.L-K3 key comparison piloted by INMETRO. The results of this regional comparison (RMO key comparison) contribute to the Mutual Recognition Arrangement (MRA) between the national metrology institutes of the Metre Convention. It is linked with the CCL-K3 key comparison via laboratories that participated in both the CIPM and the RMO comparisons. This common participation establishes the link between the comparisons and ensures equivalence of national metrology institutes, according to the MRA between NMIs. The SIM NMIs that took part in the CCL-K3 were NIST, NRC and CENAM. However, NRC withdrew from it. GUM from Poland (EURAMET) and NPLI from India (APMP) were invited to participate in the SIM.L-K3 key comparison. The circulation of artefacts (a 12 faces polygon and 4 angle blocks) started in 2008 and was completed in 2009.
Fil: Vieira, L. H. Brum. Instituto Nacional de Metrologia, Qualidade e Tecnologia (INMetro); Brasil
Fil: Stone, J. National Institute of Standards and Technology (NIST); Estados Unidos
Fil: Viliesid, M. Centro Nacional de Metrología (CENAM); México
Fil: Gastaldi, B. R. Instituto Nacional de Tecnología Industrial (INTI); Argentina
Fil: Przybylska, J. Główny Urząd Miar (GUM); Polonia
Fil: Chaudhary, K. P. National Physical Laboratory (NPL); India
Fuente
Metrología, 52
Materia
Sistema Interamericano de Metrología
Metrología
Calibración
Patrones
Ángulos
Medidores
Mediciones
Instrumentos de medición
Nivel de accesibilidad
acceso abierto
Condiciones de uso
https://creativecommons.org/licenses/by/3.0/
Repositorio
Repositorio Institucional del Instituto Nacional de Tecnología Industrial (INTI)
Institución
Instituto Nacional de Tecnología Industrial
OAI Identificador
nuevadc:Gastaldi2015Angle_pdf
Acceder
id RIINTI_a6b0e100164da2129485a2fe6c6b1825
oai_identifier_str nuevadc:Gastaldi2015Angle_pdf
network_acronym_str RIINTI
repository_id_str
network_name_str Repositorio Institucional del Instituto Nacional de Tecnología Industrial (INTI)
spelling Key Comparison : SIM.L-K3.2008. Calibration of angle standards. Report – FinalVieira, L. H. BrumStone, J.Viliesid, M.Gastaldi, B. R.Przybylska, J.Chaudhary, K. P.Sistema Interamericano de MetrologíaMetrologíaCalibraciónPatronesÁngulosMedidoresMedicionesInstrumentos de mediciónIn 2000, a key comparison, CCL-K3 (optical polygon and angle blocks) was started, piloted by NMISA. Based on it, in 2007, the SIM metrological region started a SIM.L-K3 key comparison piloted by INMETRO. The results of this regional comparison (RMO key comparison) contribute to the Mutual Recognition Arrangement (MRA) between the national metrology institutes of the Metre Convention. It is linked with the CCL-K3 key comparison via laboratories that participated in both the CIPM and the RMO comparisons. This common participation establishes the link between the comparisons and ensures equivalence of national metrology institutes, according to the MRA between NMIs. The SIM NMIs that took part in the CCL-K3 were NIST, NRC and CENAM. However, NRC withdrew from it. GUM from Poland (EURAMET) and NPLI from India (APMP) were invited to participate in the SIM.L-K3 key comparison. The circulation of artefacts (a 12 faces polygon and 4 angle blocks) started in 2008 and was completed in 2009.Fil: Vieira, L. H. Brum. Instituto Nacional de Metrologia, Qualidade e Tecnologia (INMetro); BrasilFil: Stone, J. National Institute of Standards and Technology (NIST); Estados UnidosFil: Viliesid, M. Centro Nacional de Metrología (CENAM); MéxicoFil: Gastaldi, B. R. Instituto Nacional de Tecnología Industrial (INTI); ArgentinaFil: Przybylska, J. Główny Urząd Miar (GUM); PoloniaFil: Chaudhary, K. P. National Physical Laboratory (NPL); IndiaIOP Publishing2015info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionhttp://purl.org/coar/resource_type/c_6501info:ar-repo/semantics/articuloapplication/pdfGastaldi2015Angle.pdfhttps://app.inti.gob.ar/greenstone3/sites/localsite/collect/nuevadc/index/assoc/Gastaldi.dir/doc.pdfMetrología, 52reponame:Repositorio Institucional del Instituto Nacional de Tecnología Industrial (INTI)instname:Instituto Nacional de Tecnología Industrialenginfo:eu-repo/semantics/openAccesshttps://creativecommons.org/licenses/by/3.0/openAccess2025-09-04T11:43:01Znuevadc:Gastaldi2015Angle_pdfinstacron:INTIInstitucionalhttps://app.inti.gob.ar/greenstone3/biblioOrganismo científico-tecnológicohttps://argentina.gob.ar/intihttps://app.inti.gob.ar/greenstone3/oaiserver?verb=Identifypfalcato@inti.gob.arArgentinaopendoar:2025-09-04 11:43:01.608Repositorio Institucional del Instituto Nacional de Tecnología Industrial (INTI) - Instituto Nacional de Tecnología Industrialfalse
dc.title.none.fl_str_mv Key Comparison : SIM.L-K3.2008. Calibration of angle standards. Report – Final
title Key Comparison : SIM.L-K3.2008. Calibration of angle standards. Report – Final
spellingShingle Key Comparison : SIM.L-K3.2008. Calibration of angle standards. Report – Final
Vieira, L. H. Brum
Sistema Interamericano de Metrología
Metrología
Calibración
Patrones
Ángulos
Medidores
Mediciones
Instrumentos de medición
title_short Key Comparison : SIM.L-K3.2008. Calibration of angle standards. Report – Final
title_full Key Comparison : SIM.L-K3.2008. Calibration of angle standards. Report – Final
title_fullStr Key Comparison : SIM.L-K3.2008. Calibration of angle standards. Report – Final
title_full_unstemmed Key Comparison : SIM.L-K3.2008. Calibration of angle standards. Report – Final
title_sort Key Comparison : SIM.L-K3.2008. Calibration of angle standards. Report – Final
dc.creator.none.fl_str_mv Vieira, L. H. Brum
Stone, J.
Viliesid, M.
Gastaldi, B. R.
Przybylska, J.
Chaudhary, K. P.
author Vieira, L. H. Brum
author_facet Vieira, L. H. Brum
Stone, J.
Viliesid, M.
Gastaldi, B. R.
Przybylska, J.
Chaudhary, K. P.
author_role author
author2 Stone, J.
Viliesid, M.
Gastaldi, B. R.
Przybylska, J.
Chaudhary, K. P.
author2_role author
author
author
author
author
dc.subject.none.fl_str_mv Sistema Interamericano de Metrología
Metrología
Calibración
Patrones
Ángulos
Medidores
Mediciones
Instrumentos de medición
topic Sistema Interamericano de Metrología
Metrología
Calibración
Patrones
Ángulos
Medidores
Mediciones
Instrumentos de medición
dc.description.none.fl_txt_mv In 2000, a key comparison, CCL-K3 (optical polygon and angle blocks) was started, piloted by NMISA. Based on it, in 2007, the SIM metrological region started a SIM.L-K3 key comparison piloted by INMETRO. The results of this regional comparison (RMO key comparison) contribute to the Mutual Recognition Arrangement (MRA) between the national metrology institutes of the Metre Convention. It is linked with the CCL-K3 key comparison via laboratories that participated in both the CIPM and the RMO comparisons. This common participation establishes the link between the comparisons and ensures equivalence of national metrology institutes, according to the MRA between NMIs. The SIM NMIs that took part in the CCL-K3 were NIST, NRC and CENAM. However, NRC withdrew from it. GUM from Poland (EURAMET) and NPLI from India (APMP) were invited to participate in the SIM.L-K3 key comparison. The circulation of artefacts (a 12 faces polygon and 4 angle blocks) started in 2008 and was completed in 2009.
Fil: Vieira, L. H. Brum. Instituto Nacional de Metrologia, Qualidade e Tecnologia (INMetro); Brasil
Fil: Stone, J. National Institute of Standards and Technology (NIST); Estados Unidos
Fil: Viliesid, M. Centro Nacional de Metrología (CENAM); México
Fil: Gastaldi, B. R. Instituto Nacional de Tecnología Industrial (INTI); Argentina
Fil: Przybylska, J. Główny Urząd Miar (GUM); Polonia
Fil: Chaudhary, K. P. National Physical Laboratory (NPL); India
description In 2000, a key comparison, CCL-K3 (optical polygon and angle blocks) was started, piloted by NMISA. Based on it, in 2007, the SIM metrological region started a SIM.L-K3 key comparison piloted by INMETRO. The results of this regional comparison (RMO key comparison) contribute to the Mutual Recognition Arrangement (MRA) between the national metrology institutes of the Metre Convention. It is linked with the CCL-K3 key comparison via laboratories that participated in both the CIPM and the RMO comparisons. This common participation establishes the link between the comparisons and ensures equivalence of national metrology institutes, according to the MRA between NMIs. The SIM NMIs that took part in the CCL-K3 were NIST, NRC and CENAM. However, NRC withdrew from it. GUM from Poland (EURAMET) and NPLI from India (APMP) were invited to participate in the SIM.L-K3 key comparison. The circulation of artefacts (a 12 faces polygon and 4 angle blocks) started in 2008 and was completed in 2009.
publishDate 2015
dc.date.none.fl_str_mv 2015
dc.type.none.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
http://purl.org/coar/resource_type/c_6501
info:ar-repo/semantics/articulo
format article
status_str publishedVersion
dc.identifier.none.fl_str_mv Gastaldi2015Angle.pdf
https://app.inti.gob.ar/greenstone3/sites/localsite/collect/nuevadc/index/assoc/Gastaldi.dir/doc.pdf
identifier_str_mv Gastaldi2015Angle.pdf
url https://app.inti.gob.ar/greenstone3/sites/localsite/collect/nuevadc/index/assoc/Gastaldi.dir/doc.pdf
dc.language.none.fl_str_mv eng
language eng
dc.rights.none.fl_str_mv info:eu-repo/semantics/openAccess
https://creativecommons.org/licenses/by/3.0/
openAccess
eu_rights_str_mv openAccess
rights_invalid_str_mv https://creativecommons.org/licenses/by/3.0/
openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv IOP Publishing
publisher.none.fl_str_mv IOP Publishing
dc.source.none.fl_str_mv Metrología, 52
reponame:Repositorio Institucional del Instituto Nacional de Tecnología Industrial (INTI)
instname:Instituto Nacional de Tecnología Industrial
reponame_str Repositorio Institucional del Instituto Nacional de Tecnología Industrial (INTI)
collection Repositorio Institucional del Instituto Nacional de Tecnología Industrial (INTI)
instname_str Instituto Nacional de Tecnología Industrial
repository.name.fl_str_mv Repositorio Institucional del Instituto Nacional de Tecnología Industrial (INTI) - Instituto Nacional de Tecnología Industrial
repository.mail.fl_str_mv pfalcato@inti.gob.ar
_version_ 1842346558037688320
score 12.623145

Publicaciones similares