Incorporación de zeolitas en sistemas estructurados rígidos y flexibles

Autores
Cecchini, Juan Pablo
Año de publicación
2013
Idioma
español castellano
Tipo de recurso
tesis doctoral
Estado
versión aceptada
Colaborador/a o director/a de tesis
Milt, Viviana Guadalupe
Briand, Laura Estefanía
Gennero de Chialvo, María Rosa
Reboredo, María Marta
Ulla, María Alicia
Descripción
Fil: Cecchini, Juan Pablo. Universidad Nacional del Litoral. Facultad de Ingeniería Química; Argentina.
La eliminación de contaminantes gaseosos generalmente se realiza mediante el uso de catalizadores y existe una fuerte demanda hacia nuevos tipos de materiales catalíticos. El objetivo general de esta tesis fue el desarrollo de catalizadores estructurados para aplicaciones ambientales. Se incorporaron diferentes zeolitas tanto a estructuras rígidas como a sistemas estructurados flexibles. Las estructuras rígidas empleadas fueron monolitos de cordierita, y la deposición del cubrimiento zeolítico se realizó mediante síntesis hidrotermal, ya sea con o sin siembra previa sobre los monolitos de cristales de zeolita. Por otro lado, la estructura tipo papel, con el empleo solamente de fibras celulósicas conduce a la obtención de papeles celulósicos catalíticos mientras que si se emplean fibras cerámicas junto con las fibras celulósicas, luego de la calcinación del sistema se pueden obtener papeles cerámicos catalíticos. El empleo conjunto de fibras celulósicas y cerámicas permitió, luego de ser calcinados a elevada temperatura (> 500 °C) obtener papeles cerámicos. Se incorporó zeolita tipo faujasita tanto a la pasta, previo a la conformación del papel, como una vez conformado el papel cerámico. Se encontró que algunos compuestos del tipo boratos pueden ser adecuados como fundentes cerámicos para lechos fibrosos estructurados. Los sistemas desarrollados se evaluaron para eliminación de VOC´s y oxidación de monóxido de carbono. Se encontró que la zeolita dispersa en la matriz fibrosa es efectiva para la adsorción de tolueno (como molécula representativa de los VOC´s) y que los sistemas a los que se les incorporó Pt-NaY zeolita resultaron activos en la oxidación de CO.
Removing gaseous contaminants it is usually performed by using catalysts and there is strong demand for new types of catalytic materials. The overall objective of this thesis was the development of structured catalysts for environmental applications. different zeolites were incorporated both rigid structures and flexible structured systems. The rigid structures used were cordierite monoliths. Zeolitic coating deposition was performed by hydrothermal synthesis, either with or without seeding zeolite crystals on monoliths. Furthermore, the structure type paper, with the use only of cellulosic fibers results in the production of cellulosic papers catalytic whereas if ceramic fibers are used together with cellulosic fibers, after calcination system can be obtained catalytic ceramic papers. The combined use of cellulosic fibers and ceramics allowed, after being calcined at high temperature (> 500 ° C) to obtain ceramic papers. It was joined faujasite-type zeolite, both to the pasta, prior to the formation of the paper, or once formed the ceramic paper. It was found that some compounds of borates type may be suitable as structured fibrous ceramic fluxes beds. Developed systems were evaluated for VOC removal and oxidation of carbon monoxide. It was found that the zeolite dispersed in the fibrous matrix is effective for adsorption of toluene (as a representative molecule of VOC's) and systems that are incorporated Pt-zeolite NaY were active in the oxidation of CO.
Consejo Nacional de Investigaciones Científicas y Técnicas
Agencia Nacional de Promoción Científica y Tecnológica
Universidad Nacional del Litoral
Materia
Zeolite
Hydrothermal synthesis
Catalytic cellulosic papers
Catalytic ceramic papers
Faujasite
VOC's
Zeolita
Síntesis hidrotermal
Papeles celulósicos catalíticos
Papeles cerámicos catalíticos
Faujasita
VOC's
Nivel de accesibilidad
acceso abierto
Condiciones de uso
Atribución-NoComercial-SinDerivadas 4.0 Internacional (CC BY-NC-ND 4.0)
Repositorio
Biblioteca Virtual (UNL)
Institución
Universidad Nacional del Litoral
OAI Identificador
oai:https://bibliotecavirtual.unl.edu.ar:11185/895

id UNLBT_aa3d15303fc279a609097f70dfefd79d
oai_identifier_str oai:https://bibliotecavirtual.unl.edu.ar:11185/895
network_acronym_str UNLBT
repository_id_str 2187
network_name_str Biblioteca Virtual (UNL)
spelling Incorporación de zeolitas en sistemas estructurados rígidos y flexiblesIncorporation of zeolites in rigid and flexible structured systemsCecchini, Juan PabloZeoliteHydrothermal synthesisCatalytic cellulosic papersCatalytic ceramic papersFaujasiteVOC'sZeolitaSíntesis hidrotermalPapeles celulósicos catalíticosPapeles cerámicos catalíticosFaujasitaVOC'sFil: Cecchini, Juan Pablo. Universidad Nacional del Litoral. Facultad de Ingeniería Química; Argentina.La eliminación de contaminantes gaseosos generalmente se realiza mediante el uso de catalizadores y existe una fuerte demanda hacia nuevos tipos de materiales catalíticos. El objetivo general de esta tesis fue el desarrollo de catalizadores estructurados para aplicaciones ambientales. Se incorporaron diferentes zeolitas tanto a estructuras rígidas como a sistemas estructurados flexibles. Las estructuras rígidas empleadas fueron monolitos de cordierita, y la deposición del cubrimiento zeolítico se realizó mediante síntesis hidrotermal, ya sea con o sin siembra previa sobre los monolitos de cristales de zeolita. Por otro lado, la estructura tipo papel, con el empleo solamente de fibras celulósicas conduce a la obtención de papeles celulósicos catalíticos mientras que si se emplean fibras cerámicas junto con las fibras celulósicas, luego de la calcinación del sistema se pueden obtener papeles cerámicos catalíticos. El empleo conjunto de fibras celulósicas y cerámicas permitió, luego de ser calcinados a elevada temperatura (> 500 °C) obtener papeles cerámicos. Se incorporó zeolita tipo faujasita tanto a la pasta, previo a la conformación del papel, como una vez conformado el papel cerámico. Se encontró que algunos compuestos del tipo boratos pueden ser adecuados como fundentes cerámicos para lechos fibrosos estructurados. Los sistemas desarrollados se evaluaron para eliminación de VOC´s y oxidación de monóxido de carbono. Se encontró que la zeolita dispersa en la matriz fibrosa es efectiva para la adsorción de tolueno (como molécula representativa de los VOC´s) y que los sistemas a los que se les incorporó Pt-NaY zeolita resultaron activos en la oxidación de CO.Removing gaseous contaminants it is usually performed by using catalysts and there is strong demand for new types of catalytic materials. The overall objective of this thesis was the development of structured catalysts for environmental applications. different zeolites were incorporated both rigid structures and flexible structured systems. The rigid structures used were cordierite monoliths. Zeolitic coating deposition was performed by hydrothermal synthesis, either with or without seeding zeolite crystals on monoliths. Furthermore, the structure type paper, with the use only of cellulosic fibers results in the production of cellulosic papers catalytic whereas if ceramic fibers are used together with cellulosic fibers, after calcination system can be obtained catalytic ceramic papers. The combined use of cellulosic fibers and ceramics allowed, after being calcined at high temperature (> 500 ° C) to obtain ceramic papers. It was joined faujasite-type zeolite, both to the pasta, prior to the formation of the paper, or once formed the ceramic paper. It was found that some compounds of borates type may be suitable as structured fibrous ceramic fluxes beds. Developed systems were evaluated for VOC removal and oxidation of carbon monoxide. It was found that the zeolite dispersed in the fibrous matrix is effective for adsorption of toluene (as a representative molecule of VOC's) and systems that are incorporated Pt-zeolite NaY were active in the oxidation of CO.Consejo Nacional de Investigaciones Científicas y TécnicasAgencia Nacional de Promoción Científica y TecnológicaUniversidad Nacional del LitoralMilt, Viviana GuadalupeBriand, Laura EstefaníaGennero de Chialvo, María RosaReboredo, María MartaUlla, María Alicia2016-12-022013-03-15info:eu-repo/semantics/doctoralThesisinfo:eu-repo/semantics/acceptedVersionSNRDhttp://purl.org/coar/resource_type/c_db06info:ar-repo/semantics/tesisDoctoralapplication/pdfhttp://hdl.handle.net/11185/895spaspainfo:eu-repo/semantics/openAccessAtribución-NoComercial-SinDerivadas 4.0 Internacional (CC BY-NC-ND 4.0)reponame:Biblioteca Virtual (UNL)instname:Universidad Nacional del Litoralinstacron:UNL2025-09-29T14:30:06Zoai:https://bibliotecavirtual.unl.edu.ar:11185/895Institucionalhttp://bibliotecavirtual.unl.edu.ar/Universidad públicaNo correspondeajdeba@unl.edu.arArgentinaNo correspondeNo correspondeNo correspondeopendoar:21872025-09-29 14:30:06.754Biblioteca Virtual (UNL) - Universidad Nacional del Litoralfalse
dc.title.none.fl_str_mv Incorporación de zeolitas en sistemas estructurados rígidos y flexibles
Incorporation of zeolites in rigid and flexible structured systems
title Incorporación de zeolitas en sistemas estructurados rígidos y flexibles
spellingShingle Incorporación de zeolitas en sistemas estructurados rígidos y flexibles
Cecchini, Juan Pablo
Zeolite
Hydrothermal synthesis
Catalytic cellulosic papers
Catalytic ceramic papers
Faujasite
VOC's
Zeolita
Síntesis hidrotermal
Papeles celulósicos catalíticos
Papeles cerámicos catalíticos
Faujasita
VOC's
title_short Incorporación de zeolitas en sistemas estructurados rígidos y flexibles
title_full Incorporación de zeolitas en sistemas estructurados rígidos y flexibles
title_fullStr Incorporación de zeolitas en sistemas estructurados rígidos y flexibles
title_full_unstemmed Incorporación de zeolitas en sistemas estructurados rígidos y flexibles
title_sort Incorporación de zeolitas en sistemas estructurados rígidos y flexibles
dc.creator.none.fl_str_mv Cecchini, Juan Pablo
author Cecchini, Juan Pablo
author_facet Cecchini, Juan Pablo
author_role author
dc.contributor.none.fl_str_mv Milt, Viviana Guadalupe
Briand, Laura Estefanía
Gennero de Chialvo, María Rosa
Reboredo, María Marta
Ulla, María Alicia
dc.subject.none.fl_str_mv Zeolite
Hydrothermal synthesis
Catalytic cellulosic papers
Catalytic ceramic papers
Faujasite
VOC's
Zeolita
Síntesis hidrotermal
Papeles celulósicos catalíticos
Papeles cerámicos catalíticos
Faujasita
VOC's
topic Zeolite
Hydrothermal synthesis
Catalytic cellulosic papers
Catalytic ceramic papers
Faujasite
VOC's
Zeolita
Síntesis hidrotermal
Papeles celulósicos catalíticos
Papeles cerámicos catalíticos
Faujasita
VOC's
dc.description.none.fl_txt_mv Fil: Cecchini, Juan Pablo. Universidad Nacional del Litoral. Facultad de Ingeniería Química; Argentina.
La eliminación de contaminantes gaseosos generalmente se realiza mediante el uso de catalizadores y existe una fuerte demanda hacia nuevos tipos de materiales catalíticos. El objetivo general de esta tesis fue el desarrollo de catalizadores estructurados para aplicaciones ambientales. Se incorporaron diferentes zeolitas tanto a estructuras rígidas como a sistemas estructurados flexibles. Las estructuras rígidas empleadas fueron monolitos de cordierita, y la deposición del cubrimiento zeolítico se realizó mediante síntesis hidrotermal, ya sea con o sin siembra previa sobre los monolitos de cristales de zeolita. Por otro lado, la estructura tipo papel, con el empleo solamente de fibras celulósicas conduce a la obtención de papeles celulósicos catalíticos mientras que si se emplean fibras cerámicas junto con las fibras celulósicas, luego de la calcinación del sistema se pueden obtener papeles cerámicos catalíticos. El empleo conjunto de fibras celulósicas y cerámicas permitió, luego de ser calcinados a elevada temperatura (> 500 °C) obtener papeles cerámicos. Se incorporó zeolita tipo faujasita tanto a la pasta, previo a la conformación del papel, como una vez conformado el papel cerámico. Se encontró que algunos compuestos del tipo boratos pueden ser adecuados como fundentes cerámicos para lechos fibrosos estructurados. Los sistemas desarrollados se evaluaron para eliminación de VOC´s y oxidación de monóxido de carbono. Se encontró que la zeolita dispersa en la matriz fibrosa es efectiva para la adsorción de tolueno (como molécula representativa de los VOC´s) y que los sistemas a los que se les incorporó Pt-NaY zeolita resultaron activos en la oxidación de CO.
Removing gaseous contaminants it is usually performed by using catalysts and there is strong demand for new types of catalytic materials. The overall objective of this thesis was the development of structured catalysts for environmental applications. different zeolites were incorporated both rigid structures and flexible structured systems. The rigid structures used were cordierite monoliths. Zeolitic coating deposition was performed by hydrothermal synthesis, either with or without seeding zeolite crystals on monoliths. Furthermore, the structure type paper, with the use only of cellulosic fibers results in the production of cellulosic papers catalytic whereas if ceramic fibers are used together with cellulosic fibers, after calcination system can be obtained catalytic ceramic papers. The combined use of cellulosic fibers and ceramics allowed, after being calcined at high temperature (> 500 ° C) to obtain ceramic papers. It was joined faujasite-type zeolite, both to the pasta, prior to the formation of the paper, or once formed the ceramic paper. It was found that some compounds of borates type may be suitable as structured fibrous ceramic fluxes beds. Developed systems were evaluated for VOC removal and oxidation of carbon monoxide. It was found that the zeolite dispersed in the fibrous matrix is effective for adsorption of toluene (as a representative molecule of VOC's) and systems that are incorporated Pt-zeolite NaY were active in the oxidation of CO.
Consejo Nacional de Investigaciones Científicas y Técnicas
Agencia Nacional de Promoción Científica y Tecnológica
Universidad Nacional del Litoral
description Fil: Cecchini, Juan Pablo. Universidad Nacional del Litoral. Facultad de Ingeniería Química; Argentina.
publishDate 2013
dc.date.none.fl_str_mv 2013-03-15
2016-12-02
dc.type.none.fl_str_mv info:eu-repo/semantics/doctoralThesis
info:eu-repo/semantics/acceptedVersion
SNRD
http://purl.org/coar/resource_type/c_db06
info:ar-repo/semantics/tesisDoctoral
format doctoralThesis
status_str acceptedVersion
dc.identifier.none.fl_str_mv http://hdl.handle.net/11185/895
url http://hdl.handle.net/11185/895
dc.language.none.fl_str_mv spa
spa
language spa
dc.rights.none.fl_str_mv info:eu-repo/semantics/openAccess
Atribución-NoComercial-SinDerivadas 4.0 Internacional (CC BY-NC-ND 4.0)
eu_rights_str_mv openAccess
rights_invalid_str_mv Atribución-NoComercial-SinDerivadas 4.0 Internacional (CC BY-NC-ND 4.0)
dc.format.none.fl_str_mv application/pdf
dc.source.none.fl_str_mv reponame:Biblioteca Virtual (UNL)
instname:Universidad Nacional del Litoral
instacron:UNL
reponame_str Biblioteca Virtual (UNL)
collection Biblioteca Virtual (UNL)
instname_str Universidad Nacional del Litoral
instacron_str UNL
institution UNL
repository.name.fl_str_mv Biblioteca Virtual (UNL) - Universidad Nacional del Litoral
repository.mail.fl_str_mv jdeba@unl.edu.ar
_version_ 1844621938029232128
score 12.559606