Durabilidad natural de la madera de cinco especies aptas para la industria de la construcción.

Autores
Bobadilla, Elisa Alicia
Año de publicación
2004
Idioma
español castellano
Tipo de recurso
tesis de maestría
Estado
versión aceptada
Colaborador/a o director/a de tesis
Pereyra, Obdulio
Silva, Fidelina
Descripción
Fil: Bobadilla, Elisa Alicia. Universidad Nacional de Misiones. Facultad de Ciencias Exactas, Químicas y Naturales. Maestría en Ciencias de la Madera, Celulosa y Papel; Argentina.
El objetivo general de este trabajo fue determinar la resistencia natural de la madera de cinco especies aptas para la Industria de la construcción frente al ataque de tres cepas de hongos xilófagos bajo dos condiciones: natural y después de sufrir ciclos de lavado. Como objetivo específico se planteó: a) Determinar la resistencia natural de las especies Loro blanco (Bastardiopsis densiflora), kiri (Pawlonia sp.), Toona (Toona ciliata), Grevillea (Grevillea robusta Cunn.) y Paraíso (Melia azedarach L.) al ataque de hongos Picnoporus sanguineus, Laetiporus sulfureus y Ganoderma applanatum. b) Constatar si frente al ataque de los tres hongos bajo estudio y la eliminación de las sustancias solubles en agua se altera la resistencia de las maderas de las cinco especies antes mencionadas. c) Clasificar siguiendo los Criterios de Findlay en categorías de resistencia de acuerdo al porcentaje de pérdida de peso. La madera fue seleccionada al azar en industrias locales, las cepas de hongos fueron proporcionadas por el Departamento de Ciencias Biológicas de la Facultad de Ciencias Exactas y Naturales de la Universidad de Buenos Aires. Se utilizaron 5 probetas de maderas sanas de 3 x 1 x 0,5 cm, por especie de madera y de hongos. Las probetas fueron sometidas, en laboratorio, a la acción de cepas de hongos xilófagos y colocadas en estufa a 28 ºC durante tres meses, transcurrido este periodo, se pesó cada una de las probetas y se determinó el porcentaje de pérdida de peso con respecto su valor al inicio del experimento. Los valores de perdida de peso obtenidos fueron procesados y analizados estadísticamente. Con dicho análisis y de acuerdo a la clasificación de Findlay se arribó a las siguientes conclusiones: 1. La madera de Toona es resistente, independientemente de los tratamientos y de los hongos ensayados. 2. Moderadamente resistente resultó la madera de Kiri independientemente de los tratamientos, cuando eran sometidas a la acción de los hongos Picnoporus y Laetiporus y no resistente en caso del hongo Ganoderma. 3. La madera de Grevillea es resistente frente al ataque de los hongos Laetiporus y Ganoderma en estado natural, y moderadamente resistente frente a los mismos hongos después de sufrir ciclos de lavado. No resistente en el caso del Picnoporus para ambos tratamientos. 4. La madera de Paraíso resultó ser no resistente y perecedera, frente a la acción de las tres especies de hongos y para ambos tratamientos. 5. El Loro blanco es resistente en estado natural y perecedera después de lavada frente a la acción del hongo Laetiporus, frente a la acción de los otros hongos resultó entre moderadamente resistente y no resistente, para los dos tratamientos, aplicados simultáneamente.
The general objective of this work was to determine the natural resistance of five species of wood apt for the Building Industry, submitted to the attack of three xylophagous fungi under two conditions: a natural one and also after washing cycles. As specific objectives, it was planned to: a) Determine the natural resistance of the species Loro blanco (Bastardiopsis densiflora), Kiri (Pawlonia sp), Toona (Toona ciliata), Grevillea (Grevillea robusta Cunn) and Paraíso (Melia Azedarach L), to the attack of the following fungi: Picnoporus sanguineus, Laetiporus sulfureus and Ganoderma applanatum. b) Verify if the wood resistance of the five species mentioned before was altered after being submitted to the elimination of the soluble substances in water, facing the attack of the three studied fungi. c) Classify, according to Findlay criteria, categories of resistance, according to the percentage of weight loss. Wood was selected at random from local industries. The fungi were supplied by the Department of Biological Sciences of the Faculty of Natural and Exact Sciences- UBA. Five test tubes of 3 x 1x 0,5 cm of clear timber of each species of wood and the different kinds of fungi were used. They were submitted to the action of fungi and kept in a laboratory stove at 28 ºC during three months. After this period, each test tube was weighed and the percentage of the weight loss compared to the weight of the same at the beginning of the experience was determined. The obtained values of weight loss were statistically processed and analysed. From that analysis and according to Findlay classification, the following conclusions were achieved: 1. Toona wood is resistant regardless of the treatment and the fungi. 2. Kiri wood evidenced to be moderately resistant, regardless of the treatment applied, when it was submitted to the action of the fungi Picnoporus sanguineus, and Laetiporus sulfureus. It was non-resistant in the case of the Ganoderma applanatum fungus 3. Grevillea wood is resistant to the attack of the fungi Laetiporus sulfureus and Ganoderma applanatum, in a natural condition, and is moderately resistant after washing cycles. It is non-resistant in the case of the Ganoderma applanatum fungus. 4. Paraíso wood resulted to be non-resistant and perishable facing the action of the three fungi and both treatments. 5. Loro blanco is resistant in natural condition and perishable after being washed facing the action of Laetiporus sulfureus fungus. Regarding the other two fungi it resulted to be moderately resistant and non- resistant for both treatments simultaneously applied.
Materia
Tecnología de la Madera
Madera
Celulosa
Papel
Resistencia Natural
Hongos Xilófagos
Natural Resistance
Xylophagous Fungi
Nivel de accesibilidad
acceso abierto
Condiciones de uso
Atribución-NoComercial-CompartirIgual 4.0 Internacional
Repositorio
Repositorio Institucional Digital de la Universidad Nacional de Misiones (UNaM)
Institución
Universidad Nacional de Misiones
OAI Identificador
oai:rid.unam.edu.ar:20.500.12219/2448

id RIDUNaM_d465ba81f36095f2df7cf56365f99f34
oai_identifier_str oai:rid.unam.edu.ar:20.500.12219/2448
network_acronym_str RIDUNaM
repository_id_str
network_name_str Repositorio Institucional Digital de la Universidad Nacional de Misiones (UNaM)
spelling Durabilidad natural de la madera de cinco especies aptas para la industria de la construcción.Bobadilla, Elisa AliciaTecnología de la MaderaMaderaCelulosaPapelResistencia NaturalHongos XilófagosNatural ResistanceXylophagous FungiFil: Bobadilla, Elisa Alicia. Universidad Nacional de Misiones. Facultad de Ciencias Exactas, Químicas y Naturales. Maestría en Ciencias de la Madera, Celulosa y Papel; Argentina.El objetivo general de este trabajo fue determinar la resistencia natural de la madera de cinco especies aptas para la Industria de la construcción frente al ataque de tres cepas de hongos xilófagos bajo dos condiciones: natural y después de sufrir ciclos de lavado. Como objetivo específico se planteó: a) Determinar la resistencia natural de las especies Loro blanco (Bastardiopsis densiflora), kiri (Pawlonia sp.), Toona (Toona ciliata), Grevillea (Grevillea robusta Cunn.) y Paraíso (Melia azedarach L.) al ataque de hongos Picnoporus sanguineus, Laetiporus sulfureus y Ganoderma applanatum. b) Constatar si frente al ataque de los tres hongos bajo estudio y la eliminación de las sustancias solubles en agua se altera la resistencia de las maderas de las cinco especies antes mencionadas. c) Clasificar siguiendo los Criterios de Findlay en categorías de resistencia de acuerdo al porcentaje de pérdida de peso. La madera fue seleccionada al azar en industrias locales, las cepas de hongos fueron proporcionadas por el Departamento de Ciencias Biológicas de la Facultad de Ciencias Exactas y Naturales de la Universidad de Buenos Aires. Se utilizaron 5 probetas de maderas sanas de 3 x 1 x 0,5 cm, por especie de madera y de hongos. Las probetas fueron sometidas, en laboratorio, a la acción de cepas de hongos xilófagos y colocadas en estufa a 28 ºC durante tres meses, transcurrido este periodo, se pesó cada una de las probetas y se determinó el porcentaje de pérdida de peso con respecto su valor al inicio del experimento. Los valores de perdida de peso obtenidos fueron procesados y analizados estadísticamente. Con dicho análisis y de acuerdo a la clasificación de Findlay se arribó a las siguientes conclusiones: 1. La madera de Toona es resistente, independientemente de los tratamientos y de los hongos ensayados. 2. Moderadamente resistente resultó la madera de Kiri independientemente de los tratamientos, cuando eran sometidas a la acción de los hongos Picnoporus y Laetiporus y no resistente en caso del hongo Ganoderma. 3. La madera de Grevillea es resistente frente al ataque de los hongos Laetiporus y Ganoderma en estado natural, y moderadamente resistente frente a los mismos hongos después de sufrir ciclos de lavado. No resistente en el caso del Picnoporus para ambos tratamientos. 4. La madera de Paraíso resultó ser no resistente y perecedera, frente a la acción de las tres especies de hongos y para ambos tratamientos. 5. El Loro blanco es resistente en estado natural y perecedera después de lavada frente a la acción del hongo Laetiporus, frente a la acción de los otros hongos resultó entre moderadamente resistente y no resistente, para los dos tratamientos, aplicados simultáneamente.The general objective of this work was to determine the natural resistance of five species of wood apt for the Building Industry, submitted to the attack of three xylophagous fungi under two conditions: a natural one and also after washing cycles. As specific objectives, it was planned to: a) Determine the natural resistance of the species Loro blanco (Bastardiopsis densiflora), Kiri (Pawlonia sp), Toona (Toona ciliata), Grevillea (Grevillea robusta Cunn) and Paraíso (Melia Azedarach L), to the attack of the following fungi: Picnoporus sanguineus, Laetiporus sulfureus and Ganoderma applanatum. b) Verify if the wood resistance of the five species mentioned before was altered after being submitted to the elimination of the soluble substances in water, facing the attack of the three studied fungi. c) Classify, according to Findlay criteria, categories of resistance, according to the percentage of weight loss. Wood was selected at random from local industries. The fungi were supplied by the Department of Biological Sciences of the Faculty of Natural and Exact Sciences- UBA. Five test tubes of 3 x 1x 0,5 cm of clear timber of each species of wood and the different kinds of fungi were used. They were submitted to the action of fungi and kept in a laboratory stove at 28 ºC during three months. After this period, each test tube was weighed and the percentage of the weight loss compared to the weight of the same at the beginning of the experience was determined. The obtained values of weight loss were statistically processed and analysed. From that analysis and according to Findlay classification, the following conclusions were achieved: 1. Toona wood is resistant regardless of the treatment and the fungi. 2. Kiri wood evidenced to be moderately resistant, regardless of the treatment applied, when it was submitted to the action of the fungi Picnoporus sanguineus, and Laetiporus sulfureus. It was non-resistant in the case of the Ganoderma applanatum fungus 3. Grevillea wood is resistant to the attack of the fungi Laetiporus sulfureus and Ganoderma applanatum, in a natural condition, and is moderately resistant after washing cycles. It is non-resistant in the case of the Ganoderma applanatum fungus. 4. Paraíso wood resulted to be non-resistant and perishable facing the action of the three fungi and both treatments. 5. Loro blanco is resistant in natural condition and perishable after being washed facing the action of Laetiporus sulfureus fungus. Regarding the other two fungi it resulted to be moderately resistant and non- resistant for both treatments simultaneously applied.Universidad Nacional de Misiones. Facultad de Ciencias Exactas, Químicas y Naturales. Secretaría de Investigación y Posgrado. Maestría en Ciencias de la Madera, Celulosa y Papel.Pereyra, ObdulioSilva, Fidelina2004-12-03info:eu-repo/semantics/masterThesisinfo:eu-repo/semantics/acceptedVersionhttp://purl.org/coar/resource_type/c_bdccinfo:ar-repo/semantics/tesisDeMaestriaapplication/pdfapplication/pdf3 MBhttps://hdl.handle.net/20.500.12219/2448spaARG Posadas (Misiones)2000-2004info:eu-repo/semantics/openAccessAtribución-NoComercial-CompartirIgual 4.0 Internacionalhttp://creativecommons.org/licenses/by-nc-sa/4.0/reponame:Repositorio Institucional Digital de la Universidad Nacional de Misiones (UNaM)instname:Universidad Nacional de Misiones2025-09-29T15:02:03Zoai:rid.unam.edu.ar:20.500.12219/2448instacron:UNAMInstitucionalhttps://rid.unam.edu.ar/Universidad públicahttps://www.unam.edu.ar/https://rid.unam.edu.ar/oai/rsnrdArgentinaopendoar:2025-09-29 15:02:04.143Repositorio Institucional Digital de la Universidad Nacional de Misiones (UNaM) - Universidad Nacional de Misionesfalse
dc.title.none.fl_str_mv Durabilidad natural de la madera de cinco especies aptas para la industria de la construcción.
title Durabilidad natural de la madera de cinco especies aptas para la industria de la construcción.
spellingShingle Durabilidad natural de la madera de cinco especies aptas para la industria de la construcción.
Bobadilla, Elisa Alicia
Tecnología de la Madera
Madera
Celulosa
Papel
Resistencia Natural
Hongos Xilófagos
Natural Resistance
Xylophagous Fungi
title_short Durabilidad natural de la madera de cinco especies aptas para la industria de la construcción.
title_full Durabilidad natural de la madera de cinco especies aptas para la industria de la construcción.
title_fullStr Durabilidad natural de la madera de cinco especies aptas para la industria de la construcción.
title_full_unstemmed Durabilidad natural de la madera de cinco especies aptas para la industria de la construcción.
title_sort Durabilidad natural de la madera de cinco especies aptas para la industria de la construcción.
dc.creator.none.fl_str_mv Bobadilla, Elisa Alicia
author Bobadilla, Elisa Alicia
author_facet Bobadilla, Elisa Alicia
author_role author
dc.contributor.none.fl_str_mv Pereyra, Obdulio
Silva, Fidelina
dc.subject.none.fl_str_mv Tecnología de la Madera
Madera
Celulosa
Papel
Resistencia Natural
Hongos Xilófagos
Natural Resistance
Xylophagous Fungi
topic Tecnología de la Madera
Madera
Celulosa
Papel
Resistencia Natural
Hongos Xilófagos
Natural Resistance
Xylophagous Fungi
dc.description.none.fl_txt_mv Fil: Bobadilla, Elisa Alicia. Universidad Nacional de Misiones. Facultad de Ciencias Exactas, Químicas y Naturales. Maestría en Ciencias de la Madera, Celulosa y Papel; Argentina.
El objetivo general de este trabajo fue determinar la resistencia natural de la madera de cinco especies aptas para la Industria de la construcción frente al ataque de tres cepas de hongos xilófagos bajo dos condiciones: natural y después de sufrir ciclos de lavado. Como objetivo específico se planteó: a) Determinar la resistencia natural de las especies Loro blanco (Bastardiopsis densiflora), kiri (Pawlonia sp.), Toona (Toona ciliata), Grevillea (Grevillea robusta Cunn.) y Paraíso (Melia azedarach L.) al ataque de hongos Picnoporus sanguineus, Laetiporus sulfureus y Ganoderma applanatum. b) Constatar si frente al ataque de los tres hongos bajo estudio y la eliminación de las sustancias solubles en agua se altera la resistencia de las maderas de las cinco especies antes mencionadas. c) Clasificar siguiendo los Criterios de Findlay en categorías de resistencia de acuerdo al porcentaje de pérdida de peso. La madera fue seleccionada al azar en industrias locales, las cepas de hongos fueron proporcionadas por el Departamento de Ciencias Biológicas de la Facultad de Ciencias Exactas y Naturales de la Universidad de Buenos Aires. Se utilizaron 5 probetas de maderas sanas de 3 x 1 x 0,5 cm, por especie de madera y de hongos. Las probetas fueron sometidas, en laboratorio, a la acción de cepas de hongos xilófagos y colocadas en estufa a 28 ºC durante tres meses, transcurrido este periodo, se pesó cada una de las probetas y se determinó el porcentaje de pérdida de peso con respecto su valor al inicio del experimento. Los valores de perdida de peso obtenidos fueron procesados y analizados estadísticamente. Con dicho análisis y de acuerdo a la clasificación de Findlay se arribó a las siguientes conclusiones: 1. La madera de Toona es resistente, independientemente de los tratamientos y de los hongos ensayados. 2. Moderadamente resistente resultó la madera de Kiri independientemente de los tratamientos, cuando eran sometidas a la acción de los hongos Picnoporus y Laetiporus y no resistente en caso del hongo Ganoderma. 3. La madera de Grevillea es resistente frente al ataque de los hongos Laetiporus y Ganoderma en estado natural, y moderadamente resistente frente a los mismos hongos después de sufrir ciclos de lavado. No resistente en el caso del Picnoporus para ambos tratamientos. 4. La madera de Paraíso resultó ser no resistente y perecedera, frente a la acción de las tres especies de hongos y para ambos tratamientos. 5. El Loro blanco es resistente en estado natural y perecedera después de lavada frente a la acción del hongo Laetiporus, frente a la acción de los otros hongos resultó entre moderadamente resistente y no resistente, para los dos tratamientos, aplicados simultáneamente.
The general objective of this work was to determine the natural resistance of five species of wood apt for the Building Industry, submitted to the attack of three xylophagous fungi under two conditions: a natural one and also after washing cycles. As specific objectives, it was planned to: a) Determine the natural resistance of the species Loro blanco (Bastardiopsis densiflora), Kiri (Pawlonia sp), Toona (Toona ciliata), Grevillea (Grevillea robusta Cunn) and Paraíso (Melia Azedarach L), to the attack of the following fungi: Picnoporus sanguineus, Laetiporus sulfureus and Ganoderma applanatum. b) Verify if the wood resistance of the five species mentioned before was altered after being submitted to the elimination of the soluble substances in water, facing the attack of the three studied fungi. c) Classify, according to Findlay criteria, categories of resistance, according to the percentage of weight loss. Wood was selected at random from local industries. The fungi were supplied by the Department of Biological Sciences of the Faculty of Natural and Exact Sciences- UBA. Five test tubes of 3 x 1x 0,5 cm of clear timber of each species of wood and the different kinds of fungi were used. They were submitted to the action of fungi and kept in a laboratory stove at 28 ºC during three months. After this period, each test tube was weighed and the percentage of the weight loss compared to the weight of the same at the beginning of the experience was determined. The obtained values of weight loss were statistically processed and analysed. From that analysis and according to Findlay classification, the following conclusions were achieved: 1. Toona wood is resistant regardless of the treatment and the fungi. 2. Kiri wood evidenced to be moderately resistant, regardless of the treatment applied, when it was submitted to the action of the fungi Picnoporus sanguineus, and Laetiporus sulfureus. It was non-resistant in the case of the Ganoderma applanatum fungus 3. Grevillea wood is resistant to the attack of the fungi Laetiporus sulfureus and Ganoderma applanatum, in a natural condition, and is moderately resistant after washing cycles. It is non-resistant in the case of the Ganoderma applanatum fungus. 4. Paraíso wood resulted to be non-resistant and perishable facing the action of the three fungi and both treatments. 5. Loro blanco is resistant in natural condition and perishable after being washed facing the action of Laetiporus sulfureus fungus. Regarding the other two fungi it resulted to be moderately resistant and non- resistant for both treatments simultaneously applied.
description Fil: Bobadilla, Elisa Alicia. Universidad Nacional de Misiones. Facultad de Ciencias Exactas, Químicas y Naturales. Maestría en Ciencias de la Madera, Celulosa y Papel; Argentina.
publishDate 2004
dc.date.none.fl_str_mv 2004-12-03
dc.type.none.fl_str_mv info:eu-repo/semantics/masterThesis
info:eu-repo/semantics/acceptedVersion
http://purl.org/coar/resource_type/c_bdcc
info:ar-repo/semantics/tesisDeMaestria
format masterThesis
status_str acceptedVersion
dc.identifier.none.fl_str_mv https://hdl.handle.net/20.500.12219/2448
url https://hdl.handle.net/20.500.12219/2448
dc.language.none.fl_str_mv spa
language spa
dc.rights.none.fl_str_mv info:eu-repo/semantics/openAccess
Atribución-NoComercial-CompartirIgual 4.0 Internacional
http://creativecommons.org/licenses/by-nc-sa/4.0/
eu_rights_str_mv openAccess
rights_invalid_str_mv Atribución-NoComercial-CompartirIgual 4.0 Internacional
http://creativecommons.org/licenses/by-nc-sa/4.0/
dc.format.none.fl_str_mv application/pdf
application/pdf
3 MB
dc.coverage.none.fl_str_mv ARG Posadas (Misiones)
2000-2004
dc.publisher.none.fl_str_mv Universidad Nacional de Misiones. Facultad de Ciencias Exactas, Químicas y Naturales. Secretaría de Investigación y Posgrado. Maestría en Ciencias de la Madera, Celulosa y Papel.
publisher.none.fl_str_mv Universidad Nacional de Misiones. Facultad de Ciencias Exactas, Químicas y Naturales. Secretaría de Investigación y Posgrado. Maestría en Ciencias de la Madera, Celulosa y Papel.
dc.source.none.fl_str_mv reponame:Repositorio Institucional Digital de la Universidad Nacional de Misiones (UNaM)
instname:Universidad Nacional de Misiones
reponame_str Repositorio Institucional Digital de la Universidad Nacional de Misiones (UNaM)
collection Repositorio Institucional Digital de la Universidad Nacional de Misiones (UNaM)
instname_str Universidad Nacional de Misiones
repository.name.fl_str_mv Repositorio Institucional Digital de la Universidad Nacional de Misiones (UNaM) - Universidad Nacional de Misiones
repository.mail.fl_str_mv
_version_ 1844623279899279360
score 12.559606