Equations of bark thickness and volume profiles at different heights with easy-measurement variables
- Autores
- Cellini, Juan Manuel; Galarza, Martín; Burns, Sarah Lilian; Martinez Pastur, Guillermo José; Lencinas, María Vanessa
- Año de publicación
- 2012
- Idioma
- inglés
- Tipo de recurso
- artículo
- Estado
- versión publicada
- Descripción
- The objective of this work was to develop equations of thickness profile and bark volume at different heights with easy-measurement variables, taking as a study case Nothofagus pumilio forests, growing in different site qualities and growth phases in Southern Patagonia. Data was collected from 717 harvested trees. Three models were fitted using multiple, non-lineal regression and generalized linear model, by stepwise methodology, iteratively reweighted least squares method for maximum likelihood estimation and Marquardt algorithm. The dependent variables were diameter at 1.30 m height (DBH), relative height (RH) and growth phase (GP). The statistic evaluation was made through the adjusted determinant coefficient (r2-adj), standard error of the estimation (SEE), mean absolute error and residual analysis. All models presented good fitness with a significant correlation with the growth phase. A decrease in the thickness was observed when the relative height increase. Moreover, a bark coefficient was made to calculate volume with and without bark of individual trees, where significant differences according to site quality of the stands and DBH class of the trees were observed. It can be concluded that the prediction of bark thickness and bark coefficient is possible using DBH, height, site quality and growth phase, common and easy measurement variables used in forest inventories.
El objetivo de este trabajo fue desarrollar ecuaciones de perfil del grosor y el volumen de corteza para diferentes alturas utilizando variables de fácil medición, tomando como caso de estudio los bosques de Nothofagus pumilio, creciendo en un gradiente de calidades de sitio y fases de crecimiento en Patagonia Sur. Se tomaron datos de 717 árboles. Se ajustaron tres modelos utilizando regresión múltiple, no lineal, y modelo lineal generalizado, mediante la metodología paso a paso, el algoritmo de Marquardt y de máxima verosimilitud. Las variables dependientes fueron el diámetro a 1,30 m de altura (DAP), altura relativa y la fase de crecimiento. Todos los modelos presentaron buen ajuste con una correlación significativa con la fase de crecimiento. Se observó una disminución en el espesor de corteza con el aumento de la altura relativa. Por otra parte, se desarrolló un coeficiente de corteza para calcular el volumen sin corteza de árboles, en donde se observaron diferencias significativas con la calidad de sitio y clases de DAP de los árboles. La predicción del espesor de la corteza y el coeficiente de la corteza es posible utilizando el DAP, altura, calidad de sitio y la fase de crecimiento, variables de fácil medición en inventarios forestales.
EEA Yuto
Fil: Cellini, Juan Manuel. Universidad Nacional de la Plata. Facultad de Ciencias Naturales y Museo. Laboratorio de Investigaciones en Maderas; Argentina.
Fil: Galarza, Martín. Instituto Nacional de Tecnología Agropecuaria (INTA). Estación Experimental Agropecuaria Yuto. Agencia de Extensión Rural Tartagal; Argentina.
Fil: Burns, Sarah Lilian. Universidad Nacional de la Plata. Facultad de Ciencias Naturales y Museo. Laboratorio de Investigaciones en Maderas; Argentina.
Fil: Martínez Pastur, Guillermo José. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Austral de Investigaciones Científicas (CADIC); Argentina.
Fil: Lencinas, María Vanessa. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Austral de Investigaciones Científicas (CADIC); Argentina. - Fuente
- Forest Systems, 21 (1) : 23-30 (2012)
- Materia
-
Nothofagus
Espesor
Nothofagus pumilio
Inventarios Forestales
Análisis por Regresión Múltiple
Medición
Thickness
Forest Inventories
Multiple Regression Analysis
Measurement - Nivel de accesibilidad
- acceso abierto
- Condiciones de uso
- http://creativecommons.org/licenses/by-nc-sa/4.0/
- Repositorio
- Institución
- Instituto Nacional de Tecnología Agropecuaria
- OAI Identificador
- oai:localhost:20.500.12123/11354
Ver los metadatos del registro completo
id |
INTADig_e4559c32837b25d4469ba212ec57fc30 |
---|---|
oai_identifier_str |
oai:localhost:20.500.12123/11354 |
network_acronym_str |
INTADig |
repository_id_str |
l |
network_name_str |
INTA Digital (INTA) |
spelling |
Equations of bark thickness and volume profiles at different heights with easy-measurement variablesCellini, Juan ManuelGalarza, MartínBurns, Sarah LilianMartinez Pastur, Guillermo JoséLencinas, María VanessaNothofagusEspesorNothofagus pumilioInventarios ForestalesAnálisis por Regresión MúltipleMediciónThicknessForest InventoriesMultiple Regression AnalysisMeasurementThe objective of this work was to develop equations of thickness profile and bark volume at different heights with easy-measurement variables, taking as a study case Nothofagus pumilio forests, growing in different site qualities and growth phases in Southern Patagonia. Data was collected from 717 harvested trees. Three models were fitted using multiple, non-lineal regression and generalized linear model, by stepwise methodology, iteratively reweighted least squares method for maximum likelihood estimation and Marquardt algorithm. The dependent variables were diameter at 1.30 m height (DBH), relative height (RH) and growth phase (GP). The statistic evaluation was made through the adjusted determinant coefficient (r2-adj), standard error of the estimation (SEE), mean absolute error and residual analysis. All models presented good fitness with a significant correlation with the growth phase. A decrease in the thickness was observed when the relative height increase. Moreover, a bark coefficient was made to calculate volume with and without bark of individual trees, where significant differences according to site quality of the stands and DBH class of the trees were observed. It can be concluded that the prediction of bark thickness and bark coefficient is possible using DBH, height, site quality and growth phase, common and easy measurement variables used in forest inventories.El objetivo de este trabajo fue desarrollar ecuaciones de perfil del grosor y el volumen de corteza para diferentes alturas utilizando variables de fácil medición, tomando como caso de estudio los bosques de Nothofagus pumilio, creciendo en un gradiente de calidades de sitio y fases de crecimiento en Patagonia Sur. Se tomaron datos de 717 árboles. Se ajustaron tres modelos utilizando regresión múltiple, no lineal, y modelo lineal generalizado, mediante la metodología paso a paso, el algoritmo de Marquardt y de máxima verosimilitud. Las variables dependientes fueron el diámetro a 1,30 m de altura (DAP), altura relativa y la fase de crecimiento. Todos los modelos presentaron buen ajuste con una correlación significativa con la fase de crecimiento. Se observó una disminución en el espesor de corteza con el aumento de la altura relativa. Por otra parte, se desarrolló un coeficiente de corteza para calcular el volumen sin corteza de árboles, en donde se observaron diferencias significativas con la calidad de sitio y clases de DAP de los árboles. La predicción del espesor de la corteza y el coeficiente de la corteza es posible utilizando el DAP, altura, calidad de sitio y la fase de crecimiento, variables de fácil medición en inventarios forestales.EEA YutoFil: Cellini, Juan Manuel. Universidad Nacional de la Plata. Facultad de Ciencias Naturales y Museo. Laboratorio de Investigaciones en Maderas; Argentina.Fil: Galarza, Martín. Instituto Nacional de Tecnología Agropecuaria (INTA). Estación Experimental Agropecuaria Yuto. Agencia de Extensión Rural Tartagal; Argentina.Fil: Burns, Sarah Lilian. Universidad Nacional de la Plata. Facultad de Ciencias Naturales y Museo. Laboratorio de Investigaciones en Maderas; Argentina.Fil: Martínez Pastur, Guillermo José. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Austral de Investigaciones Científicas (CADIC); Argentina.Fil: Lencinas, María Vanessa. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Austral de Investigaciones Científicas (CADIC); Argentina.Instituto Nacional de Investigación y Tecnología Agraria y Alimentaria (España)2022-03-09T14:45:53Z2022-03-09T14:45:53Z2012info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionhttp://purl.org/coar/resource_type/c_6501info:ar-repo/semantics/articuloapplication/pdfhttp://hdl.handle.net/20.500.12123/11354https://revistas.inia.es/index.php/fs/article/view/19632171-98452171-5068https://doi.org/10.5424/fs/2112211-01963Forest Systems, 21 (1) : 23-30 (2012)reponame:INTA Digital (INTA)instname:Instituto Nacional de Tecnología Agropecuariaenginfo:eu-repo/semantics/openAccesshttp://creativecommons.org/licenses/by-nc-sa/4.0/Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0)2025-09-29T13:45:29Zoai:localhost:20.500.12123/11354instacron:INTAInstitucionalhttp://repositorio.inta.gob.ar/Organismo científico-tecnológicoNo correspondehttp://repositorio.inta.gob.ar/oai/requesttripaldi.nicolas@inta.gob.arArgentinaNo correspondeNo correspondeNo correspondeopendoar:l2025-09-29 13:45:30.091INTA Digital (INTA) - Instituto Nacional de Tecnología Agropecuariafalse |
dc.title.none.fl_str_mv |
Equations of bark thickness and volume profiles at different heights with easy-measurement variables |
title |
Equations of bark thickness and volume profiles at different heights with easy-measurement variables |
spellingShingle |
Equations of bark thickness and volume profiles at different heights with easy-measurement variables Cellini, Juan Manuel Nothofagus Espesor Nothofagus pumilio Inventarios Forestales Análisis por Regresión Múltiple Medición Thickness Forest Inventories Multiple Regression Analysis Measurement |
title_short |
Equations of bark thickness and volume profiles at different heights with easy-measurement variables |
title_full |
Equations of bark thickness and volume profiles at different heights with easy-measurement variables |
title_fullStr |
Equations of bark thickness and volume profiles at different heights with easy-measurement variables |
title_full_unstemmed |
Equations of bark thickness and volume profiles at different heights with easy-measurement variables |
title_sort |
Equations of bark thickness and volume profiles at different heights with easy-measurement variables |
dc.creator.none.fl_str_mv |
Cellini, Juan Manuel Galarza, Martín Burns, Sarah Lilian Martinez Pastur, Guillermo José Lencinas, María Vanessa |
author |
Cellini, Juan Manuel |
author_facet |
Cellini, Juan Manuel Galarza, Martín Burns, Sarah Lilian Martinez Pastur, Guillermo José Lencinas, María Vanessa |
author_role |
author |
author2 |
Galarza, Martín Burns, Sarah Lilian Martinez Pastur, Guillermo José Lencinas, María Vanessa |
author2_role |
author author author author |
dc.subject.none.fl_str_mv |
Nothofagus Espesor Nothofagus pumilio Inventarios Forestales Análisis por Regresión Múltiple Medición Thickness Forest Inventories Multiple Regression Analysis Measurement |
topic |
Nothofagus Espesor Nothofagus pumilio Inventarios Forestales Análisis por Regresión Múltiple Medición Thickness Forest Inventories Multiple Regression Analysis Measurement |
dc.description.none.fl_txt_mv |
The objective of this work was to develop equations of thickness profile and bark volume at different heights with easy-measurement variables, taking as a study case Nothofagus pumilio forests, growing in different site qualities and growth phases in Southern Patagonia. Data was collected from 717 harvested trees. Three models were fitted using multiple, non-lineal regression and generalized linear model, by stepwise methodology, iteratively reweighted least squares method for maximum likelihood estimation and Marquardt algorithm. The dependent variables were diameter at 1.30 m height (DBH), relative height (RH) and growth phase (GP). The statistic evaluation was made through the adjusted determinant coefficient (r2-adj), standard error of the estimation (SEE), mean absolute error and residual analysis. All models presented good fitness with a significant correlation with the growth phase. A decrease in the thickness was observed when the relative height increase. Moreover, a bark coefficient was made to calculate volume with and without bark of individual trees, where significant differences according to site quality of the stands and DBH class of the trees were observed. It can be concluded that the prediction of bark thickness and bark coefficient is possible using DBH, height, site quality and growth phase, common and easy measurement variables used in forest inventories. El objetivo de este trabajo fue desarrollar ecuaciones de perfil del grosor y el volumen de corteza para diferentes alturas utilizando variables de fácil medición, tomando como caso de estudio los bosques de Nothofagus pumilio, creciendo en un gradiente de calidades de sitio y fases de crecimiento en Patagonia Sur. Se tomaron datos de 717 árboles. Se ajustaron tres modelos utilizando regresión múltiple, no lineal, y modelo lineal generalizado, mediante la metodología paso a paso, el algoritmo de Marquardt y de máxima verosimilitud. Las variables dependientes fueron el diámetro a 1,30 m de altura (DAP), altura relativa y la fase de crecimiento. Todos los modelos presentaron buen ajuste con una correlación significativa con la fase de crecimiento. Se observó una disminución en el espesor de corteza con el aumento de la altura relativa. Por otra parte, se desarrolló un coeficiente de corteza para calcular el volumen sin corteza de árboles, en donde se observaron diferencias significativas con la calidad de sitio y clases de DAP de los árboles. La predicción del espesor de la corteza y el coeficiente de la corteza es posible utilizando el DAP, altura, calidad de sitio y la fase de crecimiento, variables de fácil medición en inventarios forestales. EEA Yuto Fil: Cellini, Juan Manuel. Universidad Nacional de la Plata. Facultad de Ciencias Naturales y Museo. Laboratorio de Investigaciones en Maderas; Argentina. Fil: Galarza, Martín. Instituto Nacional de Tecnología Agropecuaria (INTA). Estación Experimental Agropecuaria Yuto. Agencia de Extensión Rural Tartagal; Argentina. Fil: Burns, Sarah Lilian. Universidad Nacional de la Plata. Facultad de Ciencias Naturales y Museo. Laboratorio de Investigaciones en Maderas; Argentina. Fil: Martínez Pastur, Guillermo José. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Austral de Investigaciones Científicas (CADIC); Argentina. Fil: Lencinas, María Vanessa. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Austral de Investigaciones Científicas (CADIC); Argentina. |
description |
The objective of this work was to develop equations of thickness profile and bark volume at different heights with easy-measurement variables, taking as a study case Nothofagus pumilio forests, growing in different site qualities and growth phases in Southern Patagonia. Data was collected from 717 harvested trees. Three models were fitted using multiple, non-lineal regression and generalized linear model, by stepwise methodology, iteratively reweighted least squares method for maximum likelihood estimation and Marquardt algorithm. The dependent variables were diameter at 1.30 m height (DBH), relative height (RH) and growth phase (GP). The statistic evaluation was made through the adjusted determinant coefficient (r2-adj), standard error of the estimation (SEE), mean absolute error and residual analysis. All models presented good fitness with a significant correlation with the growth phase. A decrease in the thickness was observed when the relative height increase. Moreover, a bark coefficient was made to calculate volume with and without bark of individual trees, where significant differences according to site quality of the stands and DBH class of the trees were observed. It can be concluded that the prediction of bark thickness and bark coefficient is possible using DBH, height, site quality and growth phase, common and easy measurement variables used in forest inventories. |
publishDate |
2012 |
dc.date.none.fl_str_mv |
2012 2022-03-09T14:45:53Z 2022-03-09T14:45:53Z |
dc.type.none.fl_str_mv |
info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion http://purl.org/coar/resource_type/c_6501 info:ar-repo/semantics/articulo |
format |
article |
status_str |
publishedVersion |
dc.identifier.none.fl_str_mv |
http://hdl.handle.net/20.500.12123/11354 https://revistas.inia.es/index.php/fs/article/view/1963 2171-9845 2171-5068 https://doi.org/10.5424/fs/2112211-01963 |
url |
http://hdl.handle.net/20.500.12123/11354 https://revistas.inia.es/index.php/fs/article/view/1963 https://doi.org/10.5424/fs/2112211-01963 |
identifier_str_mv |
2171-9845 2171-5068 |
dc.language.none.fl_str_mv |
eng |
language |
eng |
dc.rights.none.fl_str_mv |
info:eu-repo/semantics/openAccess http://creativecommons.org/licenses/by-nc-sa/4.0/ Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0) |
eu_rights_str_mv |
openAccess |
rights_invalid_str_mv |
http://creativecommons.org/licenses/by-nc-sa/4.0/ Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0) |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Instituto Nacional de Investigación y Tecnología Agraria y Alimentaria (España) |
publisher.none.fl_str_mv |
Instituto Nacional de Investigación y Tecnología Agraria y Alimentaria (España) |
dc.source.none.fl_str_mv |
Forest Systems, 21 (1) : 23-30 (2012) reponame:INTA Digital (INTA) instname:Instituto Nacional de Tecnología Agropecuaria |
reponame_str |
INTA Digital (INTA) |
collection |
INTA Digital (INTA) |
instname_str |
Instituto Nacional de Tecnología Agropecuaria |
repository.name.fl_str_mv |
INTA Digital (INTA) - Instituto Nacional de Tecnología Agropecuaria |
repository.mail.fl_str_mv |
tripaldi.nicolas@inta.gob.ar |
_version_ |
1844619162688684032 |
score |
12.559606 |