Light‐Based 3D Multi‐Material Printing of Micro‐Structured Bio‐Shaped, Conducting and Dry Adhesive Electrodes for Bioelectronics

Autores
Dominguez Alfaro, Antonio; Mitoudi Vagourdi, Eleni; Dimov, Ivan; Picchio, Matías Luis; Lopez Larrea, Naroa; Lopez de Lacalle, Jon; Tao, Xudong; Ruiz Mateos Serrano, Ruben; Gallastegui, Antonela; Vassardanis, Nikolaos; Mecerreyes, David; Malliaras, George G.
Año de publicación
2024
Idioma
inglés
Tipo de recurso
artículo
Estado
versión publicada
Descripción
In this work, a new method of multi-material printing in one-go using a commercially available 3D printer is presented. The approach is simple and versatile, allowing the manufacturing of multi-material layered or multi-material printing in the same layer. To the best of the knowledge, it is the first time that 3D printed Poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) micro-patterns combining different materials are reported, overcoming mechanical stability issues. Moreover, the conducting ink is engineered to obtain stable in-time materials while retaining sub-100 µm resolution. Micro-structured bio-shaped protuberances are designed and 3D printed as electrodes for electrophysiology. Moreover, these microstructures are combined with polymerizable deep eutectic solvents (polyDES) as functional additives, gaining adhesion and ionic conductivity. As a result of the novel electrodes, low skin impedance values showed suitable performance for electromyography recording on the forearm. Finally, this concluded that the use of polyDES conferred stability over time, allowing the usability of the electrode 90 days after fabrication without losing its performance. All in all, this demonstrated a very easy-to-make procedure that allows printing PEDOT:PSS on soft, hard, and/or flexible functional substrates, opening up a new paradigm in the manufacturing of conducting multi-functional materials for the field of bioelectronics and wearables.
Fil: Dominguez Alfaro, Antonio. Universidad del País Vasco; España
Fil: Mitoudi Vagourdi, Eleni. University of Cambridge; Estados Unidos
Fil: Dimov, Ivan. University of Cambridge; Estados Unidos
Fil: Picchio, Matías Luis. Universidad del País Vasco; España. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Instituto de Desarrollo Tecnológico para la Industria Química. Universidad Nacional del Litoral. Instituto de Desarrollo Tecnológico para la Industria Química; Argentina
Fil: Lopez Larrea, Naroa. Universidad del País Vasco; España
Fil: Lopez de Lacalle, Jon. Universidad del País Vasco; España
Fil: Tao, Xudong. University of Cambridge; Estados Unidos
Fil: Ruiz Mateos Serrano, Ruben. University of Cambridge; Estados Unidos
Fil: Gallastegui, Antonela. Universidad del País Vasco; España. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina
Fil: Vassardanis, Nikolaos. No especifíca;
Fil: Mecerreyes, David. Universidad del País Vasco; España
Fil: Malliaras, George G.. University of Cambridge; Estados Unidos
Materia
ADHESION
BIOELECTRONICS
DLP 3D PRINTING
MULTI-MATERIAL PRINTING
PEDOT:PSS
Nivel de accesibilidad
acceso abierto
Condiciones de uso
https://creativecommons.org/licenses/by/2.5/ar/
Repositorio
CONICET Digital (CONICET)
Institución
Consejo Nacional de Investigaciones Científicas y Técnicas
OAI Identificador
oai:ri.conicet.gov.ar:11336/243879

id CONICETDig_dcca6492eabf75466a57c7fe4dbac75f
oai_identifier_str oai:ri.conicet.gov.ar:11336/243879
network_acronym_str CONICETDig
repository_id_str 3498
network_name_str CONICET Digital (CONICET)
spelling Light‐Based 3D Multi‐Material Printing of Micro‐Structured Bio‐Shaped, Conducting and Dry Adhesive Electrodes for BioelectronicsDominguez Alfaro, AntonioMitoudi Vagourdi, EleniDimov, IvanPicchio, Matías LuisLopez Larrea, NaroaLopez de Lacalle, JonTao, XudongRuiz Mateos Serrano, RubenGallastegui, AntonelaVassardanis, NikolaosMecerreyes, DavidMalliaras, George G.ADHESIONBIOELECTRONICSDLP 3D PRINTINGMULTI-MATERIAL PRINTINGPEDOT:PSShttps://purl.org/becyt/ford/1.4https://purl.org/becyt/ford/1In this work, a new method of multi-material printing in one-go using a commercially available 3D printer is presented. The approach is simple and versatile, allowing the manufacturing of multi-material layered or multi-material printing in the same layer. To the best of the knowledge, it is the first time that 3D printed Poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) micro-patterns combining different materials are reported, overcoming mechanical stability issues. Moreover, the conducting ink is engineered to obtain stable in-time materials while retaining sub-100 µm resolution. Micro-structured bio-shaped protuberances are designed and 3D printed as electrodes for electrophysiology. Moreover, these microstructures are combined with polymerizable deep eutectic solvents (polyDES) as functional additives, gaining adhesion and ionic conductivity. As a result of the novel electrodes, low skin impedance values showed suitable performance for electromyography recording on the forearm. Finally, this concluded that the use of polyDES conferred stability over time, allowing the usability of the electrode 90 days after fabrication without losing its performance. All in all, this demonstrated a very easy-to-make procedure that allows printing PEDOT:PSS on soft, hard, and/or flexible functional substrates, opening up a new paradigm in the manufacturing of conducting multi-functional materials for the field of bioelectronics and wearables.Fil: Dominguez Alfaro, Antonio. Universidad del País Vasco; EspañaFil: Mitoudi Vagourdi, Eleni. University of Cambridge; Estados UnidosFil: Dimov, Ivan. University of Cambridge; Estados UnidosFil: Picchio, Matías Luis. Universidad del País Vasco; España. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Instituto de Desarrollo Tecnológico para la Industria Química. Universidad Nacional del Litoral. Instituto de Desarrollo Tecnológico para la Industria Química; ArgentinaFil: Lopez Larrea, Naroa. Universidad del País Vasco; EspañaFil: Lopez de Lacalle, Jon. Universidad del País Vasco; EspañaFil: Tao, Xudong. University of Cambridge; Estados UnidosFil: Ruiz Mateos Serrano, Ruben. University of Cambridge; Estados UnidosFil: Gallastegui, Antonela. Universidad del País Vasco; España. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Vassardanis, Nikolaos. No especifíca;Fil: Mecerreyes, David. Universidad del País Vasco; EspañaFil: Malliaras, George G.. University of Cambridge; Estados UnidosJohn Wiley & Sons2024-01info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionhttp://purl.org/coar/resource_type/c_6501info:ar-repo/semantics/articuloapplication/pdfapplication/pdfhttp://hdl.handle.net/11336/243879Dominguez Alfaro, Antonio; Mitoudi Vagourdi, Eleni; Dimov, Ivan; Picchio, Matías Luis; Lopez Larrea, Naroa; et al.; Light‐Based 3D Multi‐Material Printing of Micro‐Structured Bio‐Shaped, Conducting and Dry Adhesive Electrodes for Bioelectronics; John Wiley & Sons; Advanced Science; 11; 27; 1-2024; 1-132198-3844CONICET DigitalCONICETenginfo:eu-repo/semantics/altIdentifier/url/https://onlinelibrary.wiley.com/doi/full/10.1002/advs.202306424info:eu-repo/semantics/altIdentifier/doi/10.1002/advs.202306424info:eu-repo/semantics/openAccesshttps://creativecommons.org/licenses/by/2.5/ar/reponame:CONICET Digital (CONICET)instname:Consejo Nacional de Investigaciones Científicas y Técnicas2025-09-29T10:28:47Zoai:ri.conicet.gov.ar:11336/243879instacron:CONICETInstitucionalhttp://ri.conicet.gov.ar/Organismo científico-tecnológicoNo correspondehttp://ri.conicet.gov.ar/oai/requestdasensio@conicet.gov.ar; lcarlino@conicet.gov.arArgentinaNo correspondeNo correspondeNo correspondeopendoar:34982025-09-29 10:28:48.179CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicasfalse
dc.title.none.fl_str_mv Light‐Based 3D Multi‐Material Printing of Micro‐Structured Bio‐Shaped, Conducting and Dry Adhesive Electrodes for Bioelectronics
title Light‐Based 3D Multi‐Material Printing of Micro‐Structured Bio‐Shaped, Conducting and Dry Adhesive Electrodes for Bioelectronics
spellingShingle Light‐Based 3D Multi‐Material Printing of Micro‐Structured Bio‐Shaped, Conducting and Dry Adhesive Electrodes for Bioelectronics
Dominguez Alfaro, Antonio
ADHESION
BIOELECTRONICS
DLP 3D PRINTING
MULTI-MATERIAL PRINTING
PEDOT:PSS
title_short Light‐Based 3D Multi‐Material Printing of Micro‐Structured Bio‐Shaped, Conducting and Dry Adhesive Electrodes for Bioelectronics
title_full Light‐Based 3D Multi‐Material Printing of Micro‐Structured Bio‐Shaped, Conducting and Dry Adhesive Electrodes for Bioelectronics
title_fullStr Light‐Based 3D Multi‐Material Printing of Micro‐Structured Bio‐Shaped, Conducting and Dry Adhesive Electrodes for Bioelectronics
title_full_unstemmed Light‐Based 3D Multi‐Material Printing of Micro‐Structured Bio‐Shaped, Conducting and Dry Adhesive Electrodes for Bioelectronics
title_sort Light‐Based 3D Multi‐Material Printing of Micro‐Structured Bio‐Shaped, Conducting and Dry Adhesive Electrodes for Bioelectronics
dc.creator.none.fl_str_mv Dominguez Alfaro, Antonio
Mitoudi Vagourdi, Eleni
Dimov, Ivan
Picchio, Matías Luis
Lopez Larrea, Naroa
Lopez de Lacalle, Jon
Tao, Xudong
Ruiz Mateos Serrano, Ruben
Gallastegui, Antonela
Vassardanis, Nikolaos
Mecerreyes, David
Malliaras, George G.
author Dominguez Alfaro, Antonio
author_facet Dominguez Alfaro, Antonio
Mitoudi Vagourdi, Eleni
Dimov, Ivan
Picchio, Matías Luis
Lopez Larrea, Naroa
Lopez de Lacalle, Jon
Tao, Xudong
Ruiz Mateos Serrano, Ruben
Gallastegui, Antonela
Vassardanis, Nikolaos
Mecerreyes, David
Malliaras, George G.
author_role author
author2 Mitoudi Vagourdi, Eleni
Dimov, Ivan
Picchio, Matías Luis
Lopez Larrea, Naroa
Lopez de Lacalle, Jon
Tao, Xudong
Ruiz Mateos Serrano, Ruben
Gallastegui, Antonela
Vassardanis, Nikolaos
Mecerreyes, David
Malliaras, George G.
author2_role author
author
author
author
author
author
author
author
author
author
author
dc.subject.none.fl_str_mv ADHESION
BIOELECTRONICS
DLP 3D PRINTING
MULTI-MATERIAL PRINTING
PEDOT:PSS
topic ADHESION
BIOELECTRONICS
DLP 3D PRINTING
MULTI-MATERIAL PRINTING
PEDOT:PSS
purl_subject.fl_str_mv https://purl.org/becyt/ford/1.4
https://purl.org/becyt/ford/1
dc.description.none.fl_txt_mv In this work, a new method of multi-material printing in one-go using a commercially available 3D printer is presented. The approach is simple and versatile, allowing the manufacturing of multi-material layered or multi-material printing in the same layer. To the best of the knowledge, it is the first time that 3D printed Poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) micro-patterns combining different materials are reported, overcoming mechanical stability issues. Moreover, the conducting ink is engineered to obtain stable in-time materials while retaining sub-100 µm resolution. Micro-structured bio-shaped protuberances are designed and 3D printed as electrodes for electrophysiology. Moreover, these microstructures are combined with polymerizable deep eutectic solvents (polyDES) as functional additives, gaining adhesion and ionic conductivity. As a result of the novel electrodes, low skin impedance values showed suitable performance for electromyography recording on the forearm. Finally, this concluded that the use of polyDES conferred stability over time, allowing the usability of the electrode 90 days after fabrication without losing its performance. All in all, this demonstrated a very easy-to-make procedure that allows printing PEDOT:PSS on soft, hard, and/or flexible functional substrates, opening up a new paradigm in the manufacturing of conducting multi-functional materials for the field of bioelectronics and wearables.
Fil: Dominguez Alfaro, Antonio. Universidad del País Vasco; España
Fil: Mitoudi Vagourdi, Eleni. University of Cambridge; Estados Unidos
Fil: Dimov, Ivan. University of Cambridge; Estados Unidos
Fil: Picchio, Matías Luis. Universidad del País Vasco; España. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Instituto de Desarrollo Tecnológico para la Industria Química. Universidad Nacional del Litoral. Instituto de Desarrollo Tecnológico para la Industria Química; Argentina
Fil: Lopez Larrea, Naroa. Universidad del País Vasco; España
Fil: Lopez de Lacalle, Jon. Universidad del País Vasco; España
Fil: Tao, Xudong. University of Cambridge; Estados Unidos
Fil: Ruiz Mateos Serrano, Ruben. University of Cambridge; Estados Unidos
Fil: Gallastegui, Antonela. Universidad del País Vasco; España. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina
Fil: Vassardanis, Nikolaos. No especifíca;
Fil: Mecerreyes, David. Universidad del País Vasco; España
Fil: Malliaras, George G.. University of Cambridge; Estados Unidos
description In this work, a new method of multi-material printing in one-go using a commercially available 3D printer is presented. The approach is simple and versatile, allowing the manufacturing of multi-material layered or multi-material printing in the same layer. To the best of the knowledge, it is the first time that 3D printed Poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) micro-patterns combining different materials are reported, overcoming mechanical stability issues. Moreover, the conducting ink is engineered to obtain stable in-time materials while retaining sub-100 µm resolution. Micro-structured bio-shaped protuberances are designed and 3D printed as electrodes for electrophysiology. Moreover, these microstructures are combined with polymerizable deep eutectic solvents (polyDES) as functional additives, gaining adhesion and ionic conductivity. As a result of the novel electrodes, low skin impedance values showed suitable performance for electromyography recording on the forearm. Finally, this concluded that the use of polyDES conferred stability over time, allowing the usability of the electrode 90 days after fabrication without losing its performance. All in all, this demonstrated a very easy-to-make procedure that allows printing PEDOT:PSS on soft, hard, and/or flexible functional substrates, opening up a new paradigm in the manufacturing of conducting multi-functional materials for the field of bioelectronics and wearables.
publishDate 2024
dc.date.none.fl_str_mv 2024-01
dc.type.none.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
http://purl.org/coar/resource_type/c_6501
info:ar-repo/semantics/articulo
format article
status_str publishedVersion
dc.identifier.none.fl_str_mv http://hdl.handle.net/11336/243879
Dominguez Alfaro, Antonio; Mitoudi Vagourdi, Eleni; Dimov, Ivan; Picchio, Matías Luis; Lopez Larrea, Naroa; et al.; Light‐Based 3D Multi‐Material Printing of Micro‐Structured Bio‐Shaped, Conducting and Dry Adhesive Electrodes for Bioelectronics; John Wiley & Sons; Advanced Science; 11; 27; 1-2024; 1-13
2198-3844
CONICET Digital
CONICET
url http://hdl.handle.net/11336/243879
identifier_str_mv Dominguez Alfaro, Antonio; Mitoudi Vagourdi, Eleni; Dimov, Ivan; Picchio, Matías Luis; Lopez Larrea, Naroa; et al.; Light‐Based 3D Multi‐Material Printing of Micro‐Structured Bio‐Shaped, Conducting and Dry Adhesive Electrodes for Bioelectronics; John Wiley & Sons; Advanced Science; 11; 27; 1-2024; 1-13
2198-3844
CONICET Digital
CONICET
dc.language.none.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv info:eu-repo/semantics/altIdentifier/url/https://onlinelibrary.wiley.com/doi/full/10.1002/advs.202306424
info:eu-repo/semantics/altIdentifier/doi/10.1002/advs.202306424
dc.rights.none.fl_str_mv info:eu-repo/semantics/openAccess
https://creativecommons.org/licenses/by/2.5/ar/
eu_rights_str_mv openAccess
rights_invalid_str_mv https://creativecommons.org/licenses/by/2.5/ar/
dc.format.none.fl_str_mv application/pdf
application/pdf
dc.publisher.none.fl_str_mv John Wiley & Sons
publisher.none.fl_str_mv John Wiley & Sons
dc.source.none.fl_str_mv reponame:CONICET Digital (CONICET)
instname:Consejo Nacional de Investigaciones Científicas y Técnicas
reponame_str CONICET Digital (CONICET)
collection CONICET Digital (CONICET)
instname_str Consejo Nacional de Investigaciones Científicas y Técnicas
repository.name.fl_str_mv CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicas
repository.mail.fl_str_mv dasensio@conicet.gov.ar; lcarlino@conicet.gov.ar
_version_ 1844614292585840640
score 13.070432