Photocatalytic reactor employing titanium dioxide: from a theoretical model to realistic experimental results

Autores
Romero, Roberto Leopoldo; Alfano, Orlando Mario; Cassano, Alberto Enrique
Año de publicación
2009
Idioma
inglés
Tipo de recurso
artículo
Estado
versión publicada
Descripción
The performance of a reacting system for degradation of trichloroethylene (TCE) in a pilot-size annular photocatalytic reactor having a tubular lamp located at its centerline was studied. The reactor operation was carried out with commercial catalytic particles of titanium dioxide (Aldrich) in a water suspension. The description of the reactor performance was made by employing a kinetic model developed in a laboratory reactor of different size and configuration, irradiated with similar lamps of lower output power. The annular reactor was operated in the continuous mode but inside the loop of a recirculation system. The performance of the annular reactor was modeled by assuming three different behaviors: (i) a well-stirred tank reactor, (ii) a pseudo-steady-state laminar flow reactor in a batch recycle, and (iii) a transient-state laminar flow reactor in a recycle. Case iii produced the best representation of the experimental data. Along with the experimental validation of the developed theoretical models, three practical features were unveiled that had to be taken into account in any subsequent design: (a) an important change in the pH, from 6.5 to 3.5, along the reaction time; (b) a significant titanium dioxide deposition on the reactor walls; and (c) an appreciable catalyst agglomeration produced by the recirculation system and magnified by the change in pH. Only after the first 120 min of reaction time, the reactor conditions became almost stabilized; thus, the observed transformations had to be incorporated into the modeling.
Fil: Romero, Roberto Leopoldo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Instituto de Desarrollo Tecnológico para la Industria Química. Universidad Nacional del Litoral. Instituto de Desarrollo Tecnológico para la Industria Química; Argentina
Fil: Alfano, Orlando Mario. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Instituto de Desarrollo Tecnológico para la Industria Química. Universidad Nacional del Litoral. Instituto de Desarrollo Tecnológico para la Industria Química; Argentina
Fil: Cassano, Alberto Enrique. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Instituto de Desarrollo Tecnológico para la Industria Química. Universidad Nacional del Litoral. Instituto de Desarrollo Tecnológico para la Industria Química; Argentina
Materia
Trichloroethylene
Photocatalytic Reactor
Titanium Dioxide
Annular Reactor
Nivel de accesibilidad
acceso abierto
Condiciones de uso
https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
Repositorio
CONICET Digital (CONICET)
Institución
Consejo Nacional de Investigaciones Científicas y Técnicas
OAI Identificador
oai:ri.conicet.gov.ar:11336/21697
Acceder
id CONICETDig_8dbb6ef9a022862569b19f1e4679c449
oai_identifier_str oai:ri.conicet.gov.ar:11336/21697
network_acronym_str CONICETDig
repository_id_str 3498
network_name_str CONICET Digital (CONICET)
spelling Photocatalytic reactor employing titanium dioxide: from a theoretical model to realistic experimental resultsRomero, Roberto LeopoldoAlfano, Orlando MarioCassano, Alberto EnriqueTrichloroethylenePhotocatalytic ReactorTitanium DioxideAnnular Reactorhttps://purl.org/becyt/ford/2.4https://purl.org/becyt/ford/2The performance of a reacting system for degradation of trichloroethylene (TCE) in a pilot-size annular photocatalytic reactor having a tubular lamp located at its centerline was studied. The reactor operation was carried out with commercial catalytic particles of titanium dioxide (Aldrich) in a water suspension. The description of the reactor performance was made by employing a kinetic model developed in a laboratory reactor of different size and configuration, irradiated with similar lamps of lower output power. The annular reactor was operated in the continuous mode but inside the loop of a recirculation system. The performance of the annular reactor was modeled by assuming three different behaviors: (i) a well-stirred tank reactor, (ii) a pseudo-steady-state laminar flow reactor in a batch recycle, and (iii) a transient-state laminar flow reactor in a recycle. Case iii produced the best representation of the experimental data. Along with the experimental validation of the developed theoretical models, three practical features were unveiled that had to be taken into account in any subsequent design: (a) an important change in the pH, from 6.5 to 3.5, along the reaction time; (b) a significant titanium dioxide deposition on the reactor walls; and (c) an appreciable catalyst agglomeration produced by the recirculation system and magnified by the change in pH. Only after the first 120 min of reaction time, the reactor conditions became almost stabilized; thus, the observed transformations had to be incorporated into the modeling.Fil: Romero, Roberto Leopoldo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Instituto de Desarrollo Tecnológico para la Industria Química. Universidad Nacional del Litoral. Instituto de Desarrollo Tecnológico para la Industria Química; ArgentinaFil: Alfano, Orlando Mario. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Instituto de Desarrollo Tecnológico para la Industria Química. Universidad Nacional del Litoral. Instituto de Desarrollo Tecnológico para la Industria Química; ArgentinaFil: Cassano, Alberto Enrique. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Instituto de Desarrollo Tecnológico para la Industria Química. Universidad Nacional del Litoral. Instituto de Desarrollo Tecnológico para la Industria Química; ArgentinaAmerican Chemical Society2009-12info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionhttp://purl.org/coar/resource_type/c_6501info:ar-repo/semantics/articuloapplication/pdfapplication/pdfapplication/pdfapplication/pdfhttp://hdl.handle.net/11336/21697Romero, Roberto Leopoldo; Alfano, Orlando Mario; Cassano, Alberto Enrique; Photocatalytic reactor employing titanium dioxide: from a theoretical model to realistic experimental results; American Chemical Society; Industrial & Engineering Chemical Research; 48; 23; 12-2009; 10456-104660888-5885CONICET DigitalCONICETenginfo:eu-repo/semantics/altIdentifier/doi/10.1021/ie900354yinfo:eu-repo/semantics/altIdentifier/url/http://pubs.acs.org/doi/abs/10.1021/ie900354yinfo:eu-repo/semantics/openAccesshttps://creativecommons.org/licenses/by-nc-sa/2.5/ar/reponame:CONICET Digital (CONICET)instname:Consejo Nacional de Investigaciones Científicas y Técnicas2025-09-29T10:22:54Zoai:ri.conicet.gov.ar:11336/21697instacron:CONICETInstitucionalhttp://ri.conicet.gov.ar/Organismo científico-tecnológicoNo correspondehttp://ri.conicet.gov.ar/oai/requestdasensio@conicet.gov.ar; lcarlino@conicet.gov.arArgentinaNo correspondeNo correspondeNo correspondeopendoar:34982025-09-29 10:22:54.824CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicasfalse
dc.title.none.fl_str_mv Photocatalytic reactor employing titanium dioxide: from a theoretical model to realistic experimental results
title Photocatalytic reactor employing titanium dioxide: from a theoretical model to realistic experimental results
spellingShingle Photocatalytic reactor employing titanium dioxide: from a theoretical model to realistic experimental results
Romero, Roberto Leopoldo
Trichloroethylene
Photocatalytic Reactor
Titanium Dioxide
Annular Reactor
title_short Photocatalytic reactor employing titanium dioxide: from a theoretical model to realistic experimental results
title_full Photocatalytic reactor employing titanium dioxide: from a theoretical model to realistic experimental results
title_fullStr Photocatalytic reactor employing titanium dioxide: from a theoretical model to realistic experimental results
title_full_unstemmed Photocatalytic reactor employing titanium dioxide: from a theoretical model to realistic experimental results
title_sort Photocatalytic reactor employing titanium dioxide: from a theoretical model to realistic experimental results
dc.creator.none.fl_str_mv Romero, Roberto Leopoldo
Alfano, Orlando Mario
Cassano, Alberto Enrique
author Romero, Roberto Leopoldo
author_facet Romero, Roberto Leopoldo
Alfano, Orlando Mario
Cassano, Alberto Enrique
author_role author
author2 Alfano, Orlando Mario
Cassano, Alberto Enrique
author2_role author
author
dc.subject.none.fl_str_mv Trichloroethylene
Photocatalytic Reactor
Titanium Dioxide
Annular Reactor
topic Trichloroethylene
Photocatalytic Reactor
Titanium Dioxide
Annular Reactor
purl_subject.fl_str_mv https://purl.org/becyt/ford/2.4
https://purl.org/becyt/ford/2
dc.description.none.fl_txt_mv The performance of a reacting system for degradation of trichloroethylene (TCE) in a pilot-size annular photocatalytic reactor having a tubular lamp located at its centerline was studied. The reactor operation was carried out with commercial catalytic particles of titanium dioxide (Aldrich) in a water suspension. The description of the reactor performance was made by employing a kinetic model developed in a laboratory reactor of different size and configuration, irradiated with similar lamps of lower output power. The annular reactor was operated in the continuous mode but inside the loop of a recirculation system. The performance of the annular reactor was modeled by assuming three different behaviors: (i) a well-stirred tank reactor, (ii) a pseudo-steady-state laminar flow reactor in a batch recycle, and (iii) a transient-state laminar flow reactor in a recycle. Case iii produced the best representation of the experimental data. Along with the experimental validation of the developed theoretical models, three practical features were unveiled that had to be taken into account in any subsequent design: (a) an important change in the pH, from 6.5 to 3.5, along the reaction time; (b) a significant titanium dioxide deposition on the reactor walls; and (c) an appreciable catalyst agglomeration produced by the recirculation system and magnified by the change in pH. Only after the first 120 min of reaction time, the reactor conditions became almost stabilized; thus, the observed transformations had to be incorporated into the modeling.
Fil: Romero, Roberto Leopoldo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Instituto de Desarrollo Tecnológico para la Industria Química. Universidad Nacional del Litoral. Instituto de Desarrollo Tecnológico para la Industria Química; Argentina
Fil: Alfano, Orlando Mario. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Instituto de Desarrollo Tecnológico para la Industria Química. Universidad Nacional del Litoral. Instituto de Desarrollo Tecnológico para la Industria Química; Argentina
Fil: Cassano, Alberto Enrique. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Instituto de Desarrollo Tecnológico para la Industria Química. Universidad Nacional del Litoral. Instituto de Desarrollo Tecnológico para la Industria Química; Argentina
description The performance of a reacting system for degradation of trichloroethylene (TCE) in a pilot-size annular photocatalytic reactor having a tubular lamp located at its centerline was studied. The reactor operation was carried out with commercial catalytic particles of titanium dioxide (Aldrich) in a water suspension. The description of the reactor performance was made by employing a kinetic model developed in a laboratory reactor of different size and configuration, irradiated with similar lamps of lower output power. The annular reactor was operated in the continuous mode but inside the loop of a recirculation system. The performance of the annular reactor was modeled by assuming three different behaviors: (i) a well-stirred tank reactor, (ii) a pseudo-steady-state laminar flow reactor in a batch recycle, and (iii) a transient-state laminar flow reactor in a recycle. Case iii produced the best representation of the experimental data. Along with the experimental validation of the developed theoretical models, three practical features were unveiled that had to be taken into account in any subsequent design: (a) an important change in the pH, from 6.5 to 3.5, along the reaction time; (b) a significant titanium dioxide deposition on the reactor walls; and (c) an appreciable catalyst agglomeration produced by the recirculation system and magnified by the change in pH. Only after the first 120 min of reaction time, the reactor conditions became almost stabilized; thus, the observed transformations had to be incorporated into the modeling.
publishDate 2009
dc.date.none.fl_str_mv 2009-12
dc.type.none.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
http://purl.org/coar/resource_type/c_6501
info:ar-repo/semantics/articulo
format article
status_str publishedVersion
dc.identifier.none.fl_str_mv http://hdl.handle.net/11336/21697
Romero, Roberto Leopoldo; Alfano, Orlando Mario; Cassano, Alberto Enrique; Photocatalytic reactor employing titanium dioxide: from a theoretical model to realistic experimental results; American Chemical Society; Industrial & Engineering Chemical Research; 48; 23; 12-2009; 10456-10466
0888-5885
CONICET Digital
CONICET
url http://hdl.handle.net/11336/21697
identifier_str_mv Romero, Roberto Leopoldo; Alfano, Orlando Mario; Cassano, Alberto Enrique; Photocatalytic reactor employing titanium dioxide: from a theoretical model to realistic experimental results; American Chemical Society; Industrial & Engineering Chemical Research; 48; 23; 12-2009; 10456-10466
0888-5885
CONICET Digital
CONICET
dc.language.none.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv info:eu-repo/semantics/altIdentifier/doi/10.1021/ie900354y
info:eu-repo/semantics/altIdentifier/url/http://pubs.acs.org/doi/abs/10.1021/ie900354y
dc.rights.none.fl_str_mv info:eu-repo/semantics/openAccess
https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
eu_rights_str_mv openAccess
rights_invalid_str_mv https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
dc.format.none.fl_str_mv application/pdf
application/pdf
application/pdf
application/pdf
dc.publisher.none.fl_str_mv American Chemical Society
publisher.none.fl_str_mv American Chemical Society
dc.source.none.fl_str_mv reponame:CONICET Digital (CONICET)
instname:Consejo Nacional de Investigaciones Científicas y Técnicas
reponame_str CONICET Digital (CONICET)
collection CONICET Digital (CONICET)
instname_str Consejo Nacional de Investigaciones Científicas y Técnicas
repository.name.fl_str_mv CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicas
repository.mail.fl_str_mv dasensio@conicet.gov.ar; lcarlino@conicet.gov.ar
_version_ 1844614222244216832
score 13.070432

Publicaciones similares