Application of the load separation criterion in J-testing of ductile polymers: A round-robin testing exercise

Autores
Agnelli, S.; Baldi, F.; Blackman, B.R.K.; Castellani, B.L.; Frontini, Patricia Maria; Laiarinandrasana, L.; Pegoretti, A.; Rink, M.; Salazar, A.; Visser, H.A.
Año de publicación
2015
Idioma
inglés
Tipo de recurso
artículo
Estado
versión publicada
Descripción
Round robin tests carried out under the direction of the Technical Committee 4 of the European Structural Integrity Society (ESIS TC4) have shown that, for determining the fracture resistance of ductile polymers at low loading rates, the multi-specimen methodology based on the construction of the material crack growth resistance curve often does not provide reliable data due to the uncertainties associated with the measurement of crack advancement (Δa). With the aim of strengthening this multi-specimen methodology, the ESIS TC4 attention has been recently focused on the analysis of a testing scheme based on the load separation criterion, which does not require the measurement of Δa. The present work gives the results of a multi-laboratory round-robin testing exercise carried out by ESIS TC4 in order to assess the degree of reproducibility of the fracture parameters obtainable with the application of this load separation criterion based testing scheme. Encouraging results have been obtained.
Fil: Agnelli, S.. Universita degli Studi di Brescia; Italia
Fil: Baldi, F.. Universita degli Studi di Brescia; Italia
Fil: Blackman, B.R.K.. Imperial College London. South Kensington Campus; Reino Unido
Fil: Castellani, B.L.. Basic Chemicals and Plastics Research Center; Italia
Fil: Frontini, Patricia Maria. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Mar del Plata. Instituto de Investigación en Ciencia y Tecnología de Materiales (i); Argentina. Universidad Nacional de Mar del Plata. Facultad de Ingenieria; Argentina
Fil: Laiarinandrasana, L.. PSL Research University. MAT-Centre des Materiaux; Francia
Fil: Pegoretti, A.. Universita degli Studi di Trento; Italia
Fil: Rink, M.. Politecnico Di Milano; Italia
Fil: Salazar, A.. Universidad Rey Juan Carlos; España
Fil: Visser, H.A.. Universiteit Twente (ut);
Materia
J-Integral
Load Separation Criterion
Fracture Resistance
Abs-Hips
Acrylonitrile-Butadiebe-Styrene (Abs)
High-Impact Polystyrene (Hips)
Nivel de accesibilidad
acceso abierto
Condiciones de uso
https://creativecommons.org/licenses/by-nc-nd/2.5/ar/
Repositorio
CONICET Digital (CONICET)
Institución
Consejo Nacional de Investigaciones Científicas y Técnicas
OAI Identificador
oai:ri.conicet.gov.ar:11336/2983

id CONICETDig_8d7e223cfb2ce394d87a292d74c5f108
oai_identifier_str oai:ri.conicet.gov.ar:11336/2983
network_acronym_str CONICETDig
repository_id_str 3498
network_name_str CONICET Digital (CONICET)
spelling Application of the load separation criterion in J-testing of ductile polymers: A round-robin testing exerciseAgnelli, S.Baldi, F.Blackman, B.R.K.Castellani, B.L.Frontini, Patricia MariaLaiarinandrasana, L.Pegoretti, A.Rink, M.Salazar, A.Visser, H.A.J-IntegralLoad Separation CriterionFracture ResistanceAbs-HipsAcrylonitrile-Butadiebe-Styrene (Abs)High-Impact Polystyrene (Hips)https://purl.org/becyt/ford/2.5https://purl.org/becyt/ford/2Round robin tests carried out under the direction of the Technical Committee 4 of the European Structural Integrity Society (ESIS TC4) have shown that, for determining the fracture resistance of ductile polymers at low loading rates, the multi-specimen methodology based on the construction of the material crack growth resistance curve often does not provide reliable data due to the uncertainties associated with the measurement of crack advancement (Δa). With the aim of strengthening this multi-specimen methodology, the ESIS TC4 attention has been recently focused on the analysis of a testing scheme based on the load separation criterion, which does not require the measurement of Δa. The present work gives the results of a multi-laboratory round-robin testing exercise carried out by ESIS TC4 in order to assess the degree of reproducibility of the fracture parameters obtainable with the application of this load separation criterion based testing scheme. Encouraging results have been obtained.Fil: Agnelli, S.. Universita degli Studi di Brescia; ItaliaFil: Baldi, F.. Universita degli Studi di Brescia; ItaliaFil: Blackman, B.R.K.. Imperial College London. South Kensington Campus; Reino UnidoFil: Castellani, B.L.. Basic Chemicals and Plastics Research Center; ItaliaFil: Frontini, Patricia Maria. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Mar del Plata. Instituto de Investigación en Ciencia y Tecnología de Materiales (i); Argentina. Universidad Nacional de Mar del Plata. Facultad de Ingenieria; ArgentinaFil: Laiarinandrasana, L.. PSL Research University. MAT-Centre des Materiaux; FranciaFil: Pegoretti, A.. Universita degli Studi di Trento; ItaliaFil: Rink, M.. Politecnico Di Milano; ItaliaFil: Salazar, A.. Universidad Rey Juan Carlos; EspañaFil: Visser, H.A.. Universiteit Twente (ut);Elsevier2015-04-04info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionhttp://purl.org/coar/resource_type/c_6501info:ar-repo/semantics/articuloapplication/pdfapplication/pdfhttp://hdl.handle.net/11336/2983Agnelli, S.; Baldi, F.; Blackman, B.R.K.; Castellani, B.L.; Frontini, Patricia Maria; et al.; Application of the load separation criterion in J-testing of ductile polymers: A round-robin testing exercise; Elsevier; Polymer Testing; 44; 4-4-2015; 72-810142-9418enginfo:eu-repo/semantics/altIdentifier/url/http://www.sciencedirect.com/science/article/pii/S0142941815000732info:eu-repo/semantics/altIdentifier/doi/10.1016/j.polymertesting.2015.03.019info:eu-repo/semantics/openAccesshttps://creativecommons.org/licenses/by-nc-nd/2.5/ar/reponame:CONICET Digital (CONICET)instname:Consejo Nacional de Investigaciones Científicas y Técnicas2025-09-29T10:07:59Zoai:ri.conicet.gov.ar:11336/2983instacron:CONICETInstitucionalhttp://ri.conicet.gov.ar/Organismo científico-tecnológicoNo correspondehttp://ri.conicet.gov.ar/oai/requestdasensio@conicet.gov.ar; lcarlino@conicet.gov.arArgentinaNo correspondeNo correspondeNo correspondeopendoar:34982025-09-29 10:07:59.586CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicasfalse
dc.title.none.fl_str_mv Application of the load separation criterion in J-testing of ductile polymers: A round-robin testing exercise
title Application of the load separation criterion in J-testing of ductile polymers: A round-robin testing exercise
spellingShingle Application of the load separation criterion in J-testing of ductile polymers: A round-robin testing exercise
Agnelli, S.
J-Integral
Load Separation Criterion
Fracture Resistance
Abs-Hips
Acrylonitrile-Butadiebe-Styrene (Abs)
High-Impact Polystyrene (Hips)
title_short Application of the load separation criterion in J-testing of ductile polymers: A round-robin testing exercise
title_full Application of the load separation criterion in J-testing of ductile polymers: A round-robin testing exercise
title_fullStr Application of the load separation criterion in J-testing of ductile polymers: A round-robin testing exercise
title_full_unstemmed Application of the load separation criterion in J-testing of ductile polymers: A round-robin testing exercise
title_sort Application of the load separation criterion in J-testing of ductile polymers: A round-robin testing exercise
dc.creator.none.fl_str_mv Agnelli, S.
Baldi, F.
Blackman, B.R.K.
Castellani, B.L.
Frontini, Patricia Maria
Laiarinandrasana, L.
Pegoretti, A.
Rink, M.
Salazar, A.
Visser, H.A.
author Agnelli, S.
author_facet Agnelli, S.
Baldi, F.
Blackman, B.R.K.
Castellani, B.L.
Frontini, Patricia Maria
Laiarinandrasana, L.
Pegoretti, A.
Rink, M.
Salazar, A.
Visser, H.A.
author_role author
author2 Baldi, F.
Blackman, B.R.K.
Castellani, B.L.
Frontini, Patricia Maria
Laiarinandrasana, L.
Pegoretti, A.
Rink, M.
Salazar, A.
Visser, H.A.
author2_role author
author
author
author
author
author
author
author
author
dc.subject.none.fl_str_mv J-Integral
Load Separation Criterion
Fracture Resistance
Abs-Hips
Acrylonitrile-Butadiebe-Styrene (Abs)
High-Impact Polystyrene (Hips)
topic J-Integral
Load Separation Criterion
Fracture Resistance
Abs-Hips
Acrylonitrile-Butadiebe-Styrene (Abs)
High-Impact Polystyrene (Hips)
purl_subject.fl_str_mv https://purl.org/becyt/ford/2.5
https://purl.org/becyt/ford/2
dc.description.none.fl_txt_mv Round robin tests carried out under the direction of the Technical Committee 4 of the European Structural Integrity Society (ESIS TC4) have shown that, for determining the fracture resistance of ductile polymers at low loading rates, the multi-specimen methodology based on the construction of the material crack growth resistance curve often does not provide reliable data due to the uncertainties associated with the measurement of crack advancement (Δa). With the aim of strengthening this multi-specimen methodology, the ESIS TC4 attention has been recently focused on the analysis of a testing scheme based on the load separation criterion, which does not require the measurement of Δa. The present work gives the results of a multi-laboratory round-robin testing exercise carried out by ESIS TC4 in order to assess the degree of reproducibility of the fracture parameters obtainable with the application of this load separation criterion based testing scheme. Encouraging results have been obtained.
Fil: Agnelli, S.. Universita degli Studi di Brescia; Italia
Fil: Baldi, F.. Universita degli Studi di Brescia; Italia
Fil: Blackman, B.R.K.. Imperial College London. South Kensington Campus; Reino Unido
Fil: Castellani, B.L.. Basic Chemicals and Plastics Research Center; Italia
Fil: Frontini, Patricia Maria. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Mar del Plata. Instituto de Investigación en Ciencia y Tecnología de Materiales (i); Argentina. Universidad Nacional de Mar del Plata. Facultad de Ingenieria; Argentina
Fil: Laiarinandrasana, L.. PSL Research University. MAT-Centre des Materiaux; Francia
Fil: Pegoretti, A.. Universita degli Studi di Trento; Italia
Fil: Rink, M.. Politecnico Di Milano; Italia
Fil: Salazar, A.. Universidad Rey Juan Carlos; España
Fil: Visser, H.A.. Universiteit Twente (ut);
description Round robin tests carried out under the direction of the Technical Committee 4 of the European Structural Integrity Society (ESIS TC4) have shown that, for determining the fracture resistance of ductile polymers at low loading rates, the multi-specimen methodology based on the construction of the material crack growth resistance curve often does not provide reliable data due to the uncertainties associated with the measurement of crack advancement (Δa). With the aim of strengthening this multi-specimen methodology, the ESIS TC4 attention has been recently focused on the analysis of a testing scheme based on the load separation criterion, which does not require the measurement of Δa. The present work gives the results of a multi-laboratory round-robin testing exercise carried out by ESIS TC4 in order to assess the degree of reproducibility of the fracture parameters obtainable with the application of this load separation criterion based testing scheme. Encouraging results have been obtained.
publishDate 2015
dc.date.none.fl_str_mv 2015-04-04
dc.type.none.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
http://purl.org/coar/resource_type/c_6501
info:ar-repo/semantics/articulo
format article
status_str publishedVersion
dc.identifier.none.fl_str_mv http://hdl.handle.net/11336/2983
Agnelli, S.; Baldi, F.; Blackman, B.R.K.; Castellani, B.L.; Frontini, Patricia Maria; et al.; Application of the load separation criterion in J-testing of ductile polymers: A round-robin testing exercise; Elsevier; Polymer Testing; 44; 4-4-2015; 72-81
0142-9418
url http://hdl.handle.net/11336/2983
identifier_str_mv Agnelli, S.; Baldi, F.; Blackman, B.R.K.; Castellani, B.L.; Frontini, Patricia Maria; et al.; Application of the load separation criterion in J-testing of ductile polymers: A round-robin testing exercise; Elsevier; Polymer Testing; 44; 4-4-2015; 72-81
0142-9418
dc.language.none.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv info:eu-repo/semantics/altIdentifier/url/http://www.sciencedirect.com/science/article/pii/S0142941815000732
info:eu-repo/semantics/altIdentifier/doi/10.1016/j.polymertesting.2015.03.019
dc.rights.none.fl_str_mv info:eu-repo/semantics/openAccess
https://creativecommons.org/licenses/by-nc-nd/2.5/ar/
eu_rights_str_mv openAccess
rights_invalid_str_mv https://creativecommons.org/licenses/by-nc-nd/2.5/ar/
dc.format.none.fl_str_mv application/pdf
application/pdf
dc.publisher.none.fl_str_mv Elsevier
publisher.none.fl_str_mv Elsevier
dc.source.none.fl_str_mv reponame:CONICET Digital (CONICET)
instname:Consejo Nacional de Investigaciones Científicas y Técnicas
reponame_str CONICET Digital (CONICET)
collection CONICET Digital (CONICET)
instname_str Consejo Nacional de Investigaciones Científicas y Técnicas
repository.name.fl_str_mv CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicas
repository.mail.fl_str_mv dasensio@conicet.gov.ar; lcarlino@conicet.gov.ar
_version_ 1844613945363529728
score 13.070432