On the Properties Evolution of Eco-Material Dedicated to Manufacturing Artificial Reef via 3D Printing: Long-Term Interactions of Cementitious Materials in the Marine Environment

Autores
Boukhelf, Fouad; Sebaibi, Nassim; Boutouil, Mohamed; Yoris, Adrián Isidro; Blanco Fernandez, Elena; Castro Fresno, Daniel; Real Gutierrez, Carlos; Herbert, Roger J. H.; Greenhill, Sam; Reis, Bianca; Franco, João N.; Borges, Maria Teresa; Sousa Pinto, Isabel; van der Linden, Pieter; Gómez, Oscar Babé; Meyer, Hugo Sainz; Almada, Emanuel; Stafford, Rick; Danet, Valentin; Lobo Arteaga, Jorge; Tuaty Guerra, Miriam; Hall, Alice E.
Año de publicación
2022
Idioma
inglés
Tipo de recurso
artículo
Estado
versión publicada
Descripción
This paper deals with the evolution monitoring of biomass colonization and mechanical properties of 3D printed eco-materials/mortars immersed in the sea. Measurements of tensile strength, compressive strength, and Young’s modulus were determined on samples deployed along the Atlantic coast of Europe, in France, United Kingdom, Spain, and Portugal. The samples were manufactured using 3D printing, where six mix designs with a low environmental impact binder were used. These mortars were based on geopolymer and cementitious binders (Cement CEM III), in which sand is replaced by three types of recycled sand, including glass, seashell, and limestone by 30%, 50%, and 100% respectively. The colonization of concrete samples by micro/macro-organisms and their durability were also evaluated after 1, 3, 6, 12, and 24 months of immersion. The results showed that both biomass colonization and mechanical properties were better with CEM III compared to geopolymer-based compositions. Therefore, the mixed design optimized according to mechanical properties show that the use of CEM III should be preferred over these geopolymer binders in 3D printed concrete for artificial reef applications.
Fil: Boukhelf, Fouad. Communauté de la Normandie Université; Francia
Fil: Sebaibi, Nassim. Communauté de la Normandie Université; Francia
Fil: Boutouil, Mohamed. Communauté de la Normandie Université; Francia
Fil: Yoris, Adrián Isidro. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Departamento de Ingeniería Civil. Centro de Investigación, Desarrollo y Transferencia de Materiales y Calidad; Argentina. Grupo de Investigación de Tecnología de la Construcción; España. Universidad de Cantabria; España. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina
Fil: Blanco Fernandez, Elena. Grupo de Investigación de Tecnología de la Construcción; España. Universidad de Cantabria; España
Fil: Castro Fresno, Daniel. Grupo de Investigación de Tecnología de la Construcción; España. Universidad de Cantabria; España
Fil: Real Gutierrez, Carlos. Grupo de Investigación de Tecnología de la Construcción; España. Universidad de Cantabria; España
Fil: Herbert, Roger J. H.. Bournemouth University; Reino Unido
Fil: Greenhill, Sam. Bournemouth University; Reino Unido
Fil: Reis, Bianca. Universidad de Porto; Portugal. Universidad de Porto. Facultad de Ciências. Centro Interdisciplinar de Investigação Marinha E Ambiental.; Portugal
Fil: Franco, João N.. Universidad de Porto; Portugal. Universidad de Porto. Facultad de Ciências. Centro Interdisciplinar de Investigação Marinha E Ambiental.; Portugal. Politécnico de Leiria; Portugal
Fil: Borges, Maria Teresa. Universidad de Porto; Portugal. Universidad de Porto. Facultad de Ciências. Centro Interdisciplinar de Investigação Marinha E Ambiental.; Portugal
Fil: Sousa Pinto, Isabel. Universidad de Porto; Portugal. Universidad de Porto. Facultad de Ciências. Centro Interdisciplinar de Investigação Marinha E Ambiental.; Portugal
Fil: van der Linden, Pieter. Universidad de Porto; Portugal. Universidad de Porto. Facultad de Ciências. Centro Interdisciplinar de Investigação Marinha E Ambiental.; Portugal
Fil: Gómez, Oscar Babé. Universidad de Porto; Portugal. Universidad de Porto. Facultad de Ciências. Centro Interdisciplinar de Investigação Marinha E Ambiental.; Portugal
Fil: Meyer, Hugo Sainz. Universidad de Porto; Portugal. Universidad de Porto. Facultad de Ciências. Centro Interdisciplinar de Investigação Marinha E Ambiental.; Portugal
Fil: Almada, Emanuel. Universidad de Porto; Portugal. Universidad de Porto. Facultad de Ciências. Centro Interdisciplinar de Investigação Marinha E Ambiental.; Portugal. Marine and Environmental Sciences Centre; Portugal
Fil: Stafford, Rick. Bournemouth University; Reino Unido
Fil: Danet, Valentin. Muséum National d’Histoire Naturelle; Francia
Fil: Lobo Arteaga, Jorge. Instituto Português do Mar e da Atmosfera; Portugal. Universidade Nova de Lisboa; Portugal
Fil: Tuaty Guerra, Miriam. Centro Interdisciplinar de Investigação Marinha e Ambiental; Portugal
Fil: Hall, Alice E.. Plymouth University; Reino Unido
Materia
3D printing
eco-material
artificial reefs
micro/macro-organisms
colonization
geopolymer binder
Nivel de accesibilidad
acceso abierto
Condiciones de uso
https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
Repositorio
CONICET Digital (CONICET)
Institución
Consejo Nacional de Investigaciones Científicas y Técnicas
OAI Identificador
oai:ri.conicet.gov.ar:11336/242649
Acceder
id CONICETDig_625c72b574a99029f9eccd87b6f70e7b
oai_identifier_str oai:ri.conicet.gov.ar:11336/242649
network_acronym_str CONICETDig
repository_id_str 3498
network_name_str CONICET Digital (CONICET)
spelling On the Properties Evolution of Eco-Material Dedicated to Manufacturing Artificial Reef via 3D Printing: Long-Term Interactions of Cementitious Materials in the Marine EnvironmentBoukhelf, FouadSebaibi, NassimBoutouil, MohamedYoris, Adrián IsidroBlanco Fernandez, ElenaCastro Fresno, DanielReal Gutierrez, CarlosHerbert, Roger J. H.Greenhill, SamReis, BiancaFranco, João N.Borges, Maria TeresaSousa Pinto, Isabelvan der Linden, PieterGómez, Oscar BabéMeyer, Hugo SainzAlmada, EmanuelStafford, RickDanet, ValentinLobo Arteaga, JorgeTuaty Guerra, MiriamHall, Alice E.3D printingeco-materialartificial reefsmicro/macro-organismscolonizationgeopolymer binderhttps://purl.org/becyt/ford/2.5https://purl.org/becyt/ford/2This paper deals with the evolution monitoring of biomass colonization and mechanical properties of 3D printed eco-materials/mortars immersed in the sea. Measurements of tensile strength, compressive strength, and Young’s modulus were determined on samples deployed along the Atlantic coast of Europe, in France, United Kingdom, Spain, and Portugal. The samples were manufactured using 3D printing, where six mix designs with a low environmental impact binder were used. These mortars were based on geopolymer and cementitious binders (Cement CEM III), in which sand is replaced by three types of recycled sand, including glass, seashell, and limestone by 30%, 50%, and 100% respectively. The colonization of concrete samples by micro/macro-organisms and their durability were also evaluated after 1, 3, 6, 12, and 24 months of immersion. The results showed that both biomass colonization and mechanical properties were better with CEM III compared to geopolymer-based compositions. Therefore, the mixed design optimized according to mechanical properties show that the use of CEM III should be preferred over these geopolymer binders in 3D printed concrete for artificial reef applications.Fil: Boukhelf, Fouad. Communauté de la Normandie Université; FranciaFil: Sebaibi, Nassim. Communauté de la Normandie Université; FranciaFil: Boutouil, Mohamed. Communauté de la Normandie Université; FranciaFil: Yoris, Adrián Isidro. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Departamento de Ingeniería Civil. Centro de Investigación, Desarrollo y Transferencia de Materiales y Calidad; Argentina. Grupo de Investigación de Tecnología de la Construcción; España. Universidad de Cantabria; España. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Blanco Fernandez, Elena. Grupo de Investigación de Tecnología de la Construcción; España. Universidad de Cantabria; EspañaFil: Castro Fresno, Daniel. Grupo de Investigación de Tecnología de la Construcción; España. Universidad de Cantabria; EspañaFil: Real Gutierrez, Carlos. Grupo de Investigación de Tecnología de la Construcción; España. Universidad de Cantabria; EspañaFil: Herbert, Roger J. H.. Bournemouth University; Reino UnidoFil: Greenhill, Sam. Bournemouth University; Reino UnidoFil: Reis, Bianca. Universidad de Porto; Portugal. Universidad de Porto. Facultad de Ciências. Centro Interdisciplinar de Investigação Marinha E Ambiental.; PortugalFil: Franco, João N.. Universidad de Porto; Portugal. Universidad de Porto. Facultad de Ciências. Centro Interdisciplinar de Investigação Marinha E Ambiental.; Portugal. Politécnico de Leiria; PortugalFil: Borges, Maria Teresa. Universidad de Porto; Portugal. Universidad de Porto. Facultad de Ciências. Centro Interdisciplinar de Investigação Marinha E Ambiental.; PortugalFil: Sousa Pinto, Isabel. Universidad de Porto; Portugal. Universidad de Porto. Facultad de Ciências. Centro Interdisciplinar de Investigação Marinha E Ambiental.; PortugalFil: van der Linden, Pieter. Universidad de Porto; Portugal. Universidad de Porto. Facultad de Ciências. Centro Interdisciplinar de Investigação Marinha E Ambiental.; PortugalFil: Gómez, Oscar Babé. Universidad de Porto; Portugal. Universidad de Porto. Facultad de Ciências. Centro Interdisciplinar de Investigação Marinha E Ambiental.; PortugalFil: Meyer, Hugo Sainz. Universidad de Porto; Portugal. Universidad de Porto. Facultad de Ciências. Centro Interdisciplinar de Investigação Marinha E Ambiental.; PortugalFil: Almada, Emanuel. Universidad de Porto; Portugal. Universidad de Porto. Facultad de Ciências. Centro Interdisciplinar de Investigação Marinha E Ambiental.; Portugal. Marine and Environmental Sciences Centre; PortugalFil: Stafford, Rick. Bournemouth University; Reino UnidoFil: Danet, Valentin. Muséum National d’Histoire Naturelle; FranciaFil: Lobo Arteaga, Jorge. Instituto Português do Mar e da Atmosfera; Portugal. Universidade Nova de Lisboa; PortugalFil: Tuaty Guerra, Miriam. Centro Interdisciplinar de Investigação Marinha e Ambiental; PortugalFil: Hall, Alice E.. Plymouth University; Reino UnidoMultidisciplinary Digital Publishing Institute2022-07info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionhttp://purl.org/coar/resource_type/c_6501info:ar-repo/semantics/articuloapplication/pdfapplication/pdfhttp://hdl.handle.net/11336/242649Boukhelf, Fouad; Sebaibi, Nassim; Boutouil, Mohamed; Yoris, Adrián Isidro; Blanco Fernandez, Elena; et al.; On the Properties Evolution of Eco-Material Dedicated to Manufacturing Artificial Reef via 3D Printing: Long-Term Interactions of Cementitious Materials in the Marine Environment; Multidisciplinary Digital Publishing Institute; Sustainability; 14; 15; 7-2022; 1-142071-1050CONICET DigitalCONICETenginfo:eu-repo/semantics/altIdentifier/url/https://www.mdpi.com/2071-1050/14/15/9353info:eu-repo/semantics/altIdentifier/doi/10.3390/su14159353info:eu-repo/semantics/openAccesshttps://creativecommons.org/licenses/by-nc-sa/2.5/ar/reponame:CONICET Digital (CONICET)instname:Consejo Nacional de Investigaciones Científicas y Técnicas2025-09-29T10:30:45Zoai:ri.conicet.gov.ar:11336/242649instacron:CONICETInstitucionalhttp://ri.conicet.gov.ar/Organismo científico-tecnológicoNo correspondehttp://ri.conicet.gov.ar/oai/requestdasensio@conicet.gov.ar; lcarlino@conicet.gov.arArgentinaNo correspondeNo correspondeNo correspondeopendoar:34982025-09-29 10:30:45.835CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicasfalse
dc.title.none.fl_str_mv On the Properties Evolution of Eco-Material Dedicated to Manufacturing Artificial Reef via 3D Printing: Long-Term Interactions of Cementitious Materials in the Marine Environment
title On the Properties Evolution of Eco-Material Dedicated to Manufacturing Artificial Reef via 3D Printing: Long-Term Interactions of Cementitious Materials in the Marine Environment
spellingShingle On the Properties Evolution of Eco-Material Dedicated to Manufacturing Artificial Reef via 3D Printing: Long-Term Interactions of Cementitious Materials in the Marine Environment
Boukhelf, Fouad
3D printing
eco-material
artificial reefs
micro/macro-organisms
colonization
geopolymer binder
title_short On the Properties Evolution of Eco-Material Dedicated to Manufacturing Artificial Reef via 3D Printing: Long-Term Interactions of Cementitious Materials in the Marine Environment
title_full On the Properties Evolution of Eco-Material Dedicated to Manufacturing Artificial Reef via 3D Printing: Long-Term Interactions of Cementitious Materials in the Marine Environment
title_fullStr On the Properties Evolution of Eco-Material Dedicated to Manufacturing Artificial Reef via 3D Printing: Long-Term Interactions of Cementitious Materials in the Marine Environment
title_full_unstemmed On the Properties Evolution of Eco-Material Dedicated to Manufacturing Artificial Reef via 3D Printing: Long-Term Interactions of Cementitious Materials in the Marine Environment
title_sort On the Properties Evolution of Eco-Material Dedicated to Manufacturing Artificial Reef via 3D Printing: Long-Term Interactions of Cementitious Materials in the Marine Environment
dc.creator.none.fl_str_mv Boukhelf, Fouad
Sebaibi, Nassim
Boutouil, Mohamed
Yoris, Adrián Isidro
Blanco Fernandez, Elena
Castro Fresno, Daniel
Real Gutierrez, Carlos
Herbert, Roger J. H.
Greenhill, Sam
Reis, Bianca
Franco, João N.
Borges, Maria Teresa
Sousa Pinto, Isabel
van der Linden, Pieter
Gómez, Oscar Babé
Meyer, Hugo Sainz
Almada, Emanuel
Stafford, Rick
Danet, Valentin
Lobo Arteaga, Jorge
Tuaty Guerra, Miriam
Hall, Alice E.
author Boukhelf, Fouad
author_facet Boukhelf, Fouad
Sebaibi, Nassim
Boutouil, Mohamed
Yoris, Adrián Isidro
Blanco Fernandez, Elena
Castro Fresno, Daniel
Real Gutierrez, Carlos
Herbert, Roger J. H.
Greenhill, Sam
Reis, Bianca
Franco, João N.
Borges, Maria Teresa
Sousa Pinto, Isabel
van der Linden, Pieter
Gómez, Oscar Babé
Meyer, Hugo Sainz
Almada, Emanuel
Stafford, Rick
Danet, Valentin
Lobo Arteaga, Jorge
Tuaty Guerra, Miriam
Hall, Alice E.
author_role author
author2 Sebaibi, Nassim
Boutouil, Mohamed
Yoris, Adrián Isidro
Blanco Fernandez, Elena
Castro Fresno, Daniel
Real Gutierrez, Carlos
Herbert, Roger J. H.
Greenhill, Sam
Reis, Bianca
Franco, João N.
Borges, Maria Teresa
Sousa Pinto, Isabel
van der Linden, Pieter
Gómez, Oscar Babé
Meyer, Hugo Sainz
Almada, Emanuel
Stafford, Rick
Danet, Valentin
Lobo Arteaga, Jorge
Tuaty Guerra, Miriam
Hall, Alice E.
author2_role author
author
author
author
author
author
author
author
author
author
author
author
author
author
author
author
author
author
author
author
author
dc.subject.none.fl_str_mv 3D printing
eco-material
artificial reefs
micro/macro-organisms
colonization
geopolymer binder
topic 3D printing
eco-material
artificial reefs
micro/macro-organisms
colonization
geopolymer binder
purl_subject.fl_str_mv https://purl.org/becyt/ford/2.5
https://purl.org/becyt/ford/2
dc.description.none.fl_txt_mv This paper deals with the evolution monitoring of biomass colonization and mechanical properties of 3D printed eco-materials/mortars immersed in the sea. Measurements of tensile strength, compressive strength, and Young’s modulus were determined on samples deployed along the Atlantic coast of Europe, in France, United Kingdom, Spain, and Portugal. The samples were manufactured using 3D printing, where six mix designs with a low environmental impact binder were used. These mortars were based on geopolymer and cementitious binders (Cement CEM III), in which sand is replaced by three types of recycled sand, including glass, seashell, and limestone by 30%, 50%, and 100% respectively. The colonization of concrete samples by micro/macro-organisms and their durability were also evaluated after 1, 3, 6, 12, and 24 months of immersion. The results showed that both biomass colonization and mechanical properties were better with CEM III compared to geopolymer-based compositions. Therefore, the mixed design optimized according to mechanical properties show that the use of CEM III should be preferred over these geopolymer binders in 3D printed concrete for artificial reef applications.
Fil: Boukhelf, Fouad. Communauté de la Normandie Université; Francia
Fil: Sebaibi, Nassim. Communauté de la Normandie Université; Francia
Fil: Boutouil, Mohamed. Communauté de la Normandie Université; Francia
Fil: Yoris, Adrián Isidro. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Departamento de Ingeniería Civil. Centro de Investigación, Desarrollo y Transferencia de Materiales y Calidad; Argentina. Grupo de Investigación de Tecnología de la Construcción; España. Universidad de Cantabria; España. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina
Fil: Blanco Fernandez, Elena. Grupo de Investigación de Tecnología de la Construcción; España. Universidad de Cantabria; España
Fil: Castro Fresno, Daniel. Grupo de Investigación de Tecnología de la Construcción; España. Universidad de Cantabria; España
Fil: Real Gutierrez, Carlos. Grupo de Investigación de Tecnología de la Construcción; España. Universidad de Cantabria; España
Fil: Herbert, Roger J. H.. Bournemouth University; Reino Unido
Fil: Greenhill, Sam. Bournemouth University; Reino Unido
Fil: Reis, Bianca. Universidad de Porto; Portugal. Universidad de Porto. Facultad de Ciências. Centro Interdisciplinar de Investigação Marinha E Ambiental.; Portugal
Fil: Franco, João N.. Universidad de Porto; Portugal. Universidad de Porto. Facultad de Ciências. Centro Interdisciplinar de Investigação Marinha E Ambiental.; Portugal. Politécnico de Leiria; Portugal
Fil: Borges, Maria Teresa. Universidad de Porto; Portugal. Universidad de Porto. Facultad de Ciências. Centro Interdisciplinar de Investigação Marinha E Ambiental.; Portugal
Fil: Sousa Pinto, Isabel. Universidad de Porto; Portugal. Universidad de Porto. Facultad de Ciências. Centro Interdisciplinar de Investigação Marinha E Ambiental.; Portugal
Fil: van der Linden, Pieter. Universidad de Porto; Portugal. Universidad de Porto. Facultad de Ciências. Centro Interdisciplinar de Investigação Marinha E Ambiental.; Portugal
Fil: Gómez, Oscar Babé. Universidad de Porto; Portugal. Universidad de Porto. Facultad de Ciências. Centro Interdisciplinar de Investigação Marinha E Ambiental.; Portugal
Fil: Meyer, Hugo Sainz. Universidad de Porto; Portugal. Universidad de Porto. Facultad de Ciências. Centro Interdisciplinar de Investigação Marinha E Ambiental.; Portugal
Fil: Almada, Emanuel. Universidad de Porto; Portugal. Universidad de Porto. Facultad de Ciências. Centro Interdisciplinar de Investigação Marinha E Ambiental.; Portugal. Marine and Environmental Sciences Centre; Portugal
Fil: Stafford, Rick. Bournemouth University; Reino Unido
Fil: Danet, Valentin. Muséum National d’Histoire Naturelle; Francia
Fil: Lobo Arteaga, Jorge. Instituto Português do Mar e da Atmosfera; Portugal. Universidade Nova de Lisboa; Portugal
Fil: Tuaty Guerra, Miriam. Centro Interdisciplinar de Investigação Marinha e Ambiental; Portugal
Fil: Hall, Alice E.. Plymouth University; Reino Unido
description This paper deals with the evolution monitoring of biomass colonization and mechanical properties of 3D printed eco-materials/mortars immersed in the sea. Measurements of tensile strength, compressive strength, and Young’s modulus were determined on samples deployed along the Atlantic coast of Europe, in France, United Kingdom, Spain, and Portugal. The samples were manufactured using 3D printing, where six mix designs with a low environmental impact binder were used. These mortars were based on geopolymer and cementitious binders (Cement CEM III), in which sand is replaced by three types of recycled sand, including glass, seashell, and limestone by 30%, 50%, and 100% respectively. The colonization of concrete samples by micro/macro-organisms and their durability were also evaluated after 1, 3, 6, 12, and 24 months of immersion. The results showed that both biomass colonization and mechanical properties were better with CEM III compared to geopolymer-based compositions. Therefore, the mixed design optimized according to mechanical properties show that the use of CEM III should be preferred over these geopolymer binders in 3D printed concrete for artificial reef applications.
publishDate 2022
dc.date.none.fl_str_mv 2022-07
dc.type.none.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
http://purl.org/coar/resource_type/c_6501
info:ar-repo/semantics/articulo
format article
status_str publishedVersion
dc.identifier.none.fl_str_mv http://hdl.handle.net/11336/242649
Boukhelf, Fouad; Sebaibi, Nassim; Boutouil, Mohamed; Yoris, Adrián Isidro; Blanco Fernandez, Elena; et al.; On the Properties Evolution of Eco-Material Dedicated to Manufacturing Artificial Reef via 3D Printing: Long-Term Interactions of Cementitious Materials in the Marine Environment; Multidisciplinary Digital Publishing Institute; Sustainability; 14; 15; 7-2022; 1-14
2071-1050
CONICET Digital
CONICET
url http://hdl.handle.net/11336/242649
identifier_str_mv Boukhelf, Fouad; Sebaibi, Nassim; Boutouil, Mohamed; Yoris, Adrián Isidro; Blanco Fernandez, Elena; et al.; On the Properties Evolution of Eco-Material Dedicated to Manufacturing Artificial Reef via 3D Printing: Long-Term Interactions of Cementitious Materials in the Marine Environment; Multidisciplinary Digital Publishing Institute; Sustainability; 14; 15; 7-2022; 1-14
2071-1050
CONICET Digital
CONICET
dc.language.none.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv info:eu-repo/semantics/altIdentifier/url/https://www.mdpi.com/2071-1050/14/15/9353
info:eu-repo/semantics/altIdentifier/doi/10.3390/su14159353
dc.rights.none.fl_str_mv info:eu-repo/semantics/openAccess
https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
eu_rights_str_mv openAccess
rights_invalid_str_mv https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
dc.format.none.fl_str_mv application/pdf
application/pdf
dc.publisher.none.fl_str_mv Multidisciplinary Digital Publishing Institute
publisher.none.fl_str_mv Multidisciplinary Digital Publishing Institute
dc.source.none.fl_str_mv reponame:CONICET Digital (CONICET)
instname:Consejo Nacional de Investigaciones Científicas y Técnicas
reponame_str CONICET Digital (CONICET)
collection CONICET Digital (CONICET)
instname_str Consejo Nacional de Investigaciones Científicas y Técnicas
repository.name.fl_str_mv CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicas
repository.mail.fl_str_mv dasensio@conicet.gov.ar; lcarlino@conicet.gov.ar
_version_ 1844614316376981504
score 13.070432

Publicaciones similares