Biocompatibility and biodegradation of polyester and polyfumarate based-scaffolds for bone tissue engineering

Autores
Cortizo, María Susana; Molinuevo, Silvina; Cortizo, Ana María
Año de publicación
2008
Idioma
inglés
Tipo de recurso
artículo
Estado
versión enviada
Descripción
Biodegradable and biocompatible polymeric scaffolds have been recently introduced for tissue regeneration purpose. In the present study we aimed to develop polymeric-based scaffolds for bone regeneration. Two polyesters, poly-β-propiolactone (PBPL), poly-ε-caprolactone (PCPL) and two polyfumarates, polydiisopropyl fumarate (PDIPF), polydicyclohexyl fumarate (PDCF) were chosen to prepare films which can support osteoblastic growth. Scanning electron microscopy and water contact angle were used to characterize the matrices. Biodegradation studies were performed both in PBS buffer and using an in vitro macrophage degradation assay. Mouse calvaria-derived MC3T3E1 cells and UMR106 rat osteosarcoma cell lines were used to perform biocompatibility and cytotoxicity studies. The polyesters, the most hydrophilic polymers studied, showed a rougher and more porous surfaces than the polyfumarates. Under acellular conditions, only PBPL was degraded by hydrolytic mechanisms. However, macrophages performed an active degradation of all polymeric films. Osteoblasts developed well-defined actin fibres without evidence of cytotoxicity when growing on the films. The number of UMR106 osteoblasts that adhered to the PBPL-based film was higher than that of the cells attached to the PECL and polyfumarates (PDIPF and PDCF) matrices. Both UMR106 and MC3T3E1 osteoblastic lines showed protein levels comparable to control conditions, demonstrating that they grew well on all surfaces. However, UMR106 cells showed a significant increase in proliferation on polyester-derived scaffolds (PBPL and PECL). The alkaline phosphatase activity of UMR106, an osteoblastic marker, was significantly higher than that of control plastic dishes. MC3T3E1 cells expressed similar levels of this differentiation marker in all polymeric matrices. We found similar collagen protein content after 48 h culture of UMR106 cells on all surfaces. However, important differences were evident in the MC3T3E1 line. In conclusion, the synthetic polymeric-based scaffold we have developed and studied supports adhesion, growth and differentiation of two osteoblastic cell lines, suggesting that they could be useful in bone tissue regeneration. Copyright  2008 John Wiley & Sons, Ltd.
Materia
Ciencias Químicas
bone tissue engineering
biocompatibility
polyesters
polydialkyl fumarates
biodegradation
film morphology
Nivel de accesibilidad
acceso abierto
Condiciones de uso
http://creativecommons.org/licenses/by/4.0/
Repositorio
CIC Digital (CICBA)
Institución
Comisión de Investigaciones Científicas de la Provincia de Buenos Aires
OAI Identificador
oai:digital.cic.gba.gob.ar:11746/4525

id CICBA_382aab98d1c84d08311041c4cea0ee2f
oai_identifier_str oai:digital.cic.gba.gob.ar:11746/4525
network_acronym_str CICBA
repository_id_str 9441
network_name_str CIC Digital (CICBA)
spelling Biocompatibility and biodegradation of polyester and polyfumarate based-scaffolds for bone tissue engineeringCortizo, María SusanaMolinuevo, SilvinaCortizo, Ana MaríaCiencias Químicasbone tissue engineeringbiocompatibilitypolyesterspolydialkyl fumaratesbiodegradationfilm morphologyBiodegradable and biocompatible polymeric scaffolds have been recently introduced for tissue regeneration purpose. In the present study we aimed to develop polymeric-based scaffolds for bone regeneration. Two polyesters, poly-β-propiolactone (PBPL), poly-ε-caprolactone (PCPL) and two polyfumarates, polydiisopropyl fumarate (PDIPF), polydicyclohexyl fumarate (PDCF) were chosen to prepare films which can support osteoblastic growth. Scanning electron microscopy and water contact angle were used to characterize the matrices. Biodegradation studies were performed both in PBS buffer and using an in vitro macrophage degradation assay. Mouse calvaria-derived MC3T3E1 cells and UMR106 rat osteosarcoma cell lines were used to perform biocompatibility and cytotoxicity studies. The polyesters, the most hydrophilic polymers studied, showed a rougher and more porous surfaces than the polyfumarates. Under acellular conditions, only PBPL was degraded by hydrolytic mechanisms. However, macrophages performed an active degradation of all polymeric films. Osteoblasts developed well-defined actin fibres without evidence of cytotoxicity when growing on the films. The number of UMR106 osteoblasts that adhered to the PBPL-based film was higher than that of the cells attached to the PECL and polyfumarates (PDIPF and PDCF) matrices. Both UMR106 and MC3T3E1 osteoblastic lines showed protein levels comparable to control conditions, demonstrating that they grew well on all surfaces. However, UMR106 cells showed a significant increase in proliferation on polyester-derived scaffolds (PBPL and PECL). The alkaline phosphatase activity of UMR106, an osteoblastic marker, was significantly higher than that of control plastic dishes. MC3T3E1 cells expressed similar levels of this differentiation marker in all polymeric matrices. We found similar collagen protein content after 48 h culture of UMR106 cells on all surfaces. However, important differences were evident in the MC3T3E1 line. In conclusion, the synthetic polymeric-based scaffold we have developed and studied supports adhesion, growth and differentiation of two osteoblastic cell lines, suggesting that they could be useful in bone tissue regeneration. Copyright  2008 John Wiley & Sons, Ltd.2008info:eu-repo/semantics/articleinfo:eu-repo/semantics/submittedVersionhttp://purl.org/coar/resource_type/c_6501info:ar-repo/semantics/articuloapplication/pdfhttps://digital.cic.gba.gob.ar/handle/11746/4525enginfo:eu-repo/semantics/openAccesshttp://creativecommons.org/licenses/by/4.0/reponame:CIC Digital (CICBA)instname:Comisión de Investigaciones Científicas de la Provincia de Buenos Airesinstacron:CICBA2025-09-29T13:40:02Zoai:digital.cic.gba.gob.ar:11746/4525Institucionalhttp://digital.cic.gba.gob.arOrganismo científico-tecnológicoNo correspondehttp://digital.cic.gba.gob.ar/oai/snrdmarisa.degiusti@sedici.unlp.edu.arArgentinaNo correspondeNo correspondeNo correspondeopendoar:94412025-09-29 13:40:02.744CIC Digital (CICBA) - Comisión de Investigaciones Científicas de la Provincia de Buenos Airesfalse
dc.title.none.fl_str_mv Biocompatibility and biodegradation of polyester and polyfumarate based-scaffolds for bone tissue engineering
title Biocompatibility and biodegradation of polyester and polyfumarate based-scaffolds for bone tissue engineering
spellingShingle Biocompatibility and biodegradation of polyester and polyfumarate based-scaffolds for bone tissue engineering
Cortizo, María Susana
Ciencias Químicas
bone tissue engineering
biocompatibility
polyesters
polydialkyl fumarates
biodegradation
film morphology
title_short Biocompatibility and biodegradation of polyester and polyfumarate based-scaffolds for bone tissue engineering
title_full Biocompatibility and biodegradation of polyester and polyfumarate based-scaffolds for bone tissue engineering
title_fullStr Biocompatibility and biodegradation of polyester and polyfumarate based-scaffolds for bone tissue engineering
title_full_unstemmed Biocompatibility and biodegradation of polyester and polyfumarate based-scaffolds for bone tissue engineering
title_sort Biocompatibility and biodegradation of polyester and polyfumarate based-scaffolds for bone tissue engineering
dc.creator.none.fl_str_mv Cortizo, María Susana
Molinuevo, Silvina
Cortizo, Ana María
author Cortizo, María Susana
author_facet Cortizo, María Susana
Molinuevo, Silvina
Cortizo, Ana María
author_role author
author2 Molinuevo, Silvina
Cortizo, Ana María
author2_role author
author
dc.subject.none.fl_str_mv Ciencias Químicas
bone tissue engineering
biocompatibility
polyesters
polydialkyl fumarates
biodegradation
film morphology
topic Ciencias Químicas
bone tissue engineering
biocompatibility
polyesters
polydialkyl fumarates
biodegradation
film morphology
dc.description.none.fl_txt_mv Biodegradable and biocompatible polymeric scaffolds have been recently introduced for tissue regeneration purpose. In the present study we aimed to develop polymeric-based scaffolds for bone regeneration. Two polyesters, poly-β-propiolactone (PBPL), poly-ε-caprolactone (PCPL) and two polyfumarates, polydiisopropyl fumarate (PDIPF), polydicyclohexyl fumarate (PDCF) were chosen to prepare films which can support osteoblastic growth. Scanning electron microscopy and water contact angle were used to characterize the matrices. Biodegradation studies were performed both in PBS buffer and using an in vitro macrophage degradation assay. Mouse calvaria-derived MC3T3E1 cells and UMR106 rat osteosarcoma cell lines were used to perform biocompatibility and cytotoxicity studies. The polyesters, the most hydrophilic polymers studied, showed a rougher and more porous surfaces than the polyfumarates. Under acellular conditions, only PBPL was degraded by hydrolytic mechanisms. However, macrophages performed an active degradation of all polymeric films. Osteoblasts developed well-defined actin fibres without evidence of cytotoxicity when growing on the films. The number of UMR106 osteoblasts that adhered to the PBPL-based film was higher than that of the cells attached to the PECL and polyfumarates (PDIPF and PDCF) matrices. Both UMR106 and MC3T3E1 osteoblastic lines showed protein levels comparable to control conditions, demonstrating that they grew well on all surfaces. However, UMR106 cells showed a significant increase in proliferation on polyester-derived scaffolds (PBPL and PECL). The alkaline phosphatase activity of UMR106, an osteoblastic marker, was significantly higher than that of control plastic dishes. MC3T3E1 cells expressed similar levels of this differentiation marker in all polymeric matrices. We found similar collagen protein content after 48 h culture of UMR106 cells on all surfaces. However, important differences were evident in the MC3T3E1 line. In conclusion, the synthetic polymeric-based scaffold we have developed and studied supports adhesion, growth and differentiation of two osteoblastic cell lines, suggesting that they could be useful in bone tissue regeneration. Copyright  2008 John Wiley & Sons, Ltd.
description Biodegradable and biocompatible polymeric scaffolds have been recently introduced for tissue regeneration purpose. In the present study we aimed to develop polymeric-based scaffolds for bone regeneration. Two polyesters, poly-β-propiolactone (PBPL), poly-ε-caprolactone (PCPL) and two polyfumarates, polydiisopropyl fumarate (PDIPF), polydicyclohexyl fumarate (PDCF) were chosen to prepare films which can support osteoblastic growth. Scanning electron microscopy and water contact angle were used to characterize the matrices. Biodegradation studies were performed both in PBS buffer and using an in vitro macrophage degradation assay. Mouse calvaria-derived MC3T3E1 cells and UMR106 rat osteosarcoma cell lines were used to perform biocompatibility and cytotoxicity studies. The polyesters, the most hydrophilic polymers studied, showed a rougher and more porous surfaces than the polyfumarates. Under acellular conditions, only PBPL was degraded by hydrolytic mechanisms. However, macrophages performed an active degradation of all polymeric films. Osteoblasts developed well-defined actin fibres without evidence of cytotoxicity when growing on the films. The number of UMR106 osteoblasts that adhered to the PBPL-based film was higher than that of the cells attached to the PECL and polyfumarates (PDIPF and PDCF) matrices. Both UMR106 and MC3T3E1 osteoblastic lines showed protein levels comparable to control conditions, demonstrating that they grew well on all surfaces. However, UMR106 cells showed a significant increase in proliferation on polyester-derived scaffolds (PBPL and PECL). The alkaline phosphatase activity of UMR106, an osteoblastic marker, was significantly higher than that of control plastic dishes. MC3T3E1 cells expressed similar levels of this differentiation marker in all polymeric matrices. We found similar collagen protein content after 48 h culture of UMR106 cells on all surfaces. However, important differences were evident in the MC3T3E1 line. In conclusion, the synthetic polymeric-based scaffold we have developed and studied supports adhesion, growth and differentiation of two osteoblastic cell lines, suggesting that they could be useful in bone tissue regeneration. Copyright  2008 John Wiley & Sons, Ltd.
publishDate 2008
dc.date.none.fl_str_mv 2008
dc.type.none.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/submittedVersion
http://purl.org/coar/resource_type/c_6501
info:ar-repo/semantics/articulo
format article
status_str submittedVersion
dc.identifier.none.fl_str_mv https://digital.cic.gba.gob.ar/handle/11746/4525
url https://digital.cic.gba.gob.ar/handle/11746/4525
dc.language.none.fl_str_mv eng
language eng
dc.rights.none.fl_str_mv info:eu-repo/semantics/openAccess
http://creativecommons.org/licenses/by/4.0/
eu_rights_str_mv openAccess
rights_invalid_str_mv http://creativecommons.org/licenses/by/4.0/
dc.format.none.fl_str_mv application/pdf
dc.source.none.fl_str_mv reponame:CIC Digital (CICBA)
instname:Comisión de Investigaciones Científicas de la Provincia de Buenos Aires
instacron:CICBA
reponame_str CIC Digital (CICBA)
collection CIC Digital (CICBA)
instname_str Comisión de Investigaciones Científicas de la Provincia de Buenos Aires
instacron_str CICBA
institution CICBA
repository.name.fl_str_mv CIC Digital (CICBA) - Comisión de Investigaciones Científicas de la Provincia de Buenos Aires
repository.mail.fl_str_mv marisa.degiusti@sedici.unlp.edu.ar
_version_ 1844618595476176896
score 13.070432