Rapid prototyping of a complex model for the manufacture of plaster molds for slip casting ceramic

Autores
Velazco, Diego Pablo Cristian; Sancet, E. F.; Urbaneja, Federico Gaston; Piccico, M.; Serra, María Florencia; Acebedo, Florencia; Suárez, Gustavo; Rendtorff Birrer, Nicolás Maximiliano
Año de publicación
2014
Idioma
inglés
Tipo de recurso
artículo
Estado
versión publicada
Descripción
Computer assisted designing (CAD) is well known for several decades and employed for ceramic manufacturing almost since the beginning, but usually employed in the first part of the projectual ideation processes, neither in the prototyping nor in the manufacturing stages. The rapid prototyping machines, also known as 3D printers, have the capacity to produce in a few hours real pieces using plastic materials of high resistance, with great precision and similarity with respect to the original, based on unprecedented digital models produced by means of modeling with specific design software or from the digitalization of existing parts using the so-called 3D scanners. The main objective of the work is to develop the methodology used in the entire process of building a part in ceramics from the interrelationship between traditional techniques and new technologies for the manufacture of prototypes. And to take advantage of the benefits that allow us this new reproduction technology. The experience was based on the generation of a complex piece, in digital format, which served as the model. A regular 15 cm icosahedron presented features complex enough not to advise the production of the model by means of the traditional techniques of ceramics (manual or mechanical). From this digital model, a plaster mold was made in the traditional way in order to slip cast clay based slurries, freely dried in air and fired and glazed in the traditional way. This experience has shown the working hypothesis and opens up the possibility of new lines of work to academic and technological levels that will be explored in the near future. This technology provides a wide range of options to address the formal aspect of a part to be performed for the field of design, architecture, industrial design, the traditional pottery, ceramic art, etc., which allow you to amplify the formal possibilities, save time and therefore costs when drafting the necessary and appropriate matrixes to each requirement.
Projeto assistido por computador (CAD) é bem conhecido por várias décadas e empregado na fabricação cerâmica desde o início, mas usualmente empregado na primeira parte dos processos na concepção do projeto, nem na prototipagem, nem nas fases de fabricação. As máquinas de prototipagem rápida, também conhecidas como impressoras 3D têm a capacidade de produzir, em poucas horas, peças utilizando materiais plásticos de alta resistência, com grande precisão e similaridade com relação ao original, com base em modelos digitais inéditos produzidos por meio de modelagem com softwares de projeto específico ou a partir da digitalização das peças existentes, utilizando os chamados scanners 3D. O principal objetivo deste trabalho é desenvolver a metodologia utilizada em todo o processo de construção de uma parte em cerâmica da inter-relação entre as técnicas tradicionais e novas tecnologias para a fabricação de protótipos. E para aproveitar os benefícios que nos permitem esta nova tecnologia de reprodução. A experiência baseou-se na geração de uma peça complexa, em formato digital, que serviu como modelo. Um icosaedro regular de 15 cm, complexo o suficiente para não sugerir a produção do modelo por meio das técnicas tradicionais cerâmicas (manual ou mecânica). A partir deste modelo digital, um molde de gesso feito na maneira tradicional para colagem por barbotina de massas à base de argila, secagem livre ao ar, queimada e esmaltada de maneira tradicional. Esta experiência mostrou a hipótese de trabalho e abre a possibilidade de novas linhas de trabalho a níveis acadêmicos e tecnológicos que serão explorados em um futuro próximo. Esta tecnologia oferece uma grande variedade de opções para lidar com o aspecto formal de uma peça a ser executada no campo do projeto, arquitetura, projeto industrial, a cerâmica tradicional, a arte cerâmica, etc., que permitem ampliar as possibilidades formais, economizar tempo e, portanto, os custos na elaboração das matrizes necessárias e adequadas para cada exigência.
Centro de Tecnología de Recursos Minerales y Cerámica
Materia
Ingeniería en Materiales
Química
Digital modeling
3d printing
Traditional ceramics
Nivel de accesibilidad
acceso abierto
Condiciones de uso
http://creativecommons.org/licenses/by-nc/4.0/
Repositorio
SEDICI (UNLP)
Institución
Universidad Nacional de La Plata
OAI Identificador
oai:sedici.unlp.edu.ar:10915/104358

id SEDICI_5e9e09a676c041ed36ee49331fe32e03
oai_identifier_str oai:sedici.unlp.edu.ar:10915/104358
network_acronym_str SEDICI
repository_id_str 1329
network_name_str SEDICI (UNLP)
spelling Rapid prototyping of a complex model for the manufacture of plaster molds for slip casting ceramicPrototipagem rápida de um modelo complexo para fabricação de moldes de gesso para barbotina cerâmicaVelazco, Diego Pablo CristianSancet, E. F.Urbaneja, Federico GastonPiccico, M.Serra, María FlorenciaAcebedo, FlorenciaSuárez, GustavoRendtorff Birrer, Nicolás MaximilianoIngeniería en MaterialesQuímicaDigital modeling3d printingTraditional ceramicsComputer assisted designing (CAD) is well known for several decades and employed for ceramic manufacturing almost since the beginning, but usually employed in the first part of the projectual ideation processes, neither in the prototyping nor in the manufacturing stages. The rapid prototyping machines, also known as 3D printers, have the capacity to produce in a few hours real pieces using plastic materials of high resistance, with great precision and similarity with respect to the original, based on unprecedented digital models produced by means of modeling with specific design software or from the digitalization of existing parts using the so-called 3D scanners. The main objective of the work is to develop the methodology used in the entire process of building a part in ceramics from the interrelationship between traditional techniques and new technologies for the manufacture of prototypes. And to take advantage of the benefits that allow us this new reproduction technology. The experience was based on the generation of a complex piece, in digital format, which served as the model. A regular 15 cm icosahedron presented features complex enough not to advise the production of the model by means of the traditional techniques of ceramics (manual or mechanical). From this digital model, a plaster mold was made in the traditional way in order to slip cast clay based slurries, freely dried in air and fired and glazed in the traditional way. This experience has shown the working hypothesis and opens up the possibility of new lines of work to academic and technological levels that will be explored in the near future. This technology provides a wide range of options to address the formal aspect of a part to be performed for the field of design, architecture, industrial design, the traditional pottery, ceramic art, etc., which allow you to amplify the formal possibilities, save time and therefore costs when drafting the necessary and appropriate matrixes to each requirement.Projeto assistido por computador (CAD) é bem conhecido por várias décadas e empregado na fabricação cerâmica desde o início, mas usualmente empregado na primeira parte dos processos na concepção do projeto, nem na prototipagem, nem nas fases de fabricação. As máquinas de prototipagem rápida, também conhecidas como impressoras 3D têm a capacidade de produzir, em poucas horas, peças utilizando materiais plásticos de alta resistência, com grande precisão e similaridade com relação ao original, com base em modelos digitais inéditos produzidos por meio de modelagem com softwares de projeto específico ou a partir da digitalização das peças existentes, utilizando os chamados scanners 3D. O principal objetivo deste trabalho é desenvolver a metodologia utilizada em todo o processo de construção de uma parte em cerâmica da inter-relação entre as técnicas tradicionais e novas tecnologias para a fabricação de protótipos. E para aproveitar os benefícios que nos permitem esta nova tecnologia de reprodução. A experiência baseou-se na geração de uma peça complexa, em formato digital, que serviu como modelo. Um icosaedro regular de 15 cm, complexo o suficiente para não sugerir a produção do modelo por meio das técnicas tradicionais cerâmicas (manual ou mecânica). A partir deste modelo digital, um molde de gesso feito na maneira tradicional para colagem por barbotina de massas à base de argila, secagem livre ao ar, queimada e esmaltada de maneira tradicional. Esta experiência mostrou a hipótese de trabalho e abre a possibilidade de novas linhas de trabalho a níveis acadêmicos e tecnológicos que serão explorados em um futuro próximo. Esta tecnologia oferece uma grande variedade de opções para lidar com o aspecto formal de uma peça a ser executada no campo do projeto, arquitetura, projeto industrial, a cerâmica tradicional, a arte cerâmica, etc., que permitem ampliar as possibilidades formais, economizar tempo e, portanto, os custos na elaboração das matrizes necessárias e adequadas para cada exigência.Centro de Tecnología de Recursos Minerales y Cerámica2014-12info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionArticulohttp://purl.org/coar/resource_type/c_6501info:ar-repo/semantics/articuloapplication/pdf465-470http://sedici.unlp.edu.ar/handle/10915/104358enginfo:eu-repo/semantics/altIdentifier/url/http://hdl.handle.net/11336/43025info:eu-repo/semantics/altIdentifier/issn/1678-4553info:eu-repo/semantics/altIdentifier/doi/10.1590/S0366-69132014000400003info:eu-repo/semantics/altIdentifier/hdl/11336/43025info:eu-repo/semantics/openAccesshttp://creativecommons.org/licenses/by-nc/4.0/Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0)reponame:SEDICI (UNLP)instname:Universidad Nacional de La Platainstacron:UNLP2025-09-29T11:22:42Zoai:sedici.unlp.edu.ar:10915/104358Institucionalhttp://sedici.unlp.edu.ar/Universidad públicaNo correspondehttp://sedici.unlp.edu.ar/oai/snrdalira@sedici.unlp.edu.arArgentinaNo correspondeNo correspondeNo correspondeopendoar:13292025-09-29 11:22:43.214SEDICI (UNLP) - Universidad Nacional de La Platafalse
dc.title.none.fl_str_mv Rapid prototyping of a complex model for the manufacture of plaster molds for slip casting ceramic
Prototipagem rápida de um modelo complexo para fabricação de moldes de gesso para barbotina cerâmica
title Rapid prototyping of a complex model for the manufacture of plaster molds for slip casting ceramic
spellingShingle Rapid prototyping of a complex model for the manufacture of plaster molds for slip casting ceramic
Velazco, Diego Pablo Cristian
Ingeniería en Materiales
Química
Digital modeling
3d printing
Traditional ceramics
title_short Rapid prototyping of a complex model for the manufacture of plaster molds for slip casting ceramic
title_full Rapid prototyping of a complex model for the manufacture of plaster molds for slip casting ceramic
title_fullStr Rapid prototyping of a complex model for the manufacture of plaster molds for slip casting ceramic
title_full_unstemmed Rapid prototyping of a complex model for the manufacture of plaster molds for slip casting ceramic
title_sort Rapid prototyping of a complex model for the manufacture of plaster molds for slip casting ceramic
dc.creator.none.fl_str_mv Velazco, Diego Pablo Cristian
Sancet, E. F.
Urbaneja, Federico Gaston
Piccico, M.
Serra, María Florencia
Acebedo, Florencia
Suárez, Gustavo
Rendtorff Birrer, Nicolás Maximiliano
author Velazco, Diego Pablo Cristian
author_facet Velazco, Diego Pablo Cristian
Sancet, E. F.
Urbaneja, Federico Gaston
Piccico, M.
Serra, María Florencia
Acebedo, Florencia
Suárez, Gustavo
Rendtorff Birrer, Nicolás Maximiliano
author_role author
author2 Sancet, E. F.
Urbaneja, Federico Gaston
Piccico, M.
Serra, María Florencia
Acebedo, Florencia
Suárez, Gustavo
Rendtorff Birrer, Nicolás Maximiliano
author2_role author
author
author
author
author
author
author
dc.subject.none.fl_str_mv Ingeniería en Materiales
Química
Digital modeling
3d printing
Traditional ceramics
topic Ingeniería en Materiales
Química
Digital modeling
3d printing
Traditional ceramics
dc.description.none.fl_txt_mv Computer assisted designing (CAD) is well known for several decades and employed for ceramic manufacturing almost since the beginning, but usually employed in the first part of the projectual ideation processes, neither in the prototyping nor in the manufacturing stages. The rapid prototyping machines, also known as 3D printers, have the capacity to produce in a few hours real pieces using plastic materials of high resistance, with great precision and similarity with respect to the original, based on unprecedented digital models produced by means of modeling with specific design software or from the digitalization of existing parts using the so-called 3D scanners. The main objective of the work is to develop the methodology used in the entire process of building a part in ceramics from the interrelationship between traditional techniques and new technologies for the manufacture of prototypes. And to take advantage of the benefits that allow us this new reproduction technology. The experience was based on the generation of a complex piece, in digital format, which served as the model. A regular 15 cm icosahedron presented features complex enough not to advise the production of the model by means of the traditional techniques of ceramics (manual or mechanical). From this digital model, a plaster mold was made in the traditional way in order to slip cast clay based slurries, freely dried in air and fired and glazed in the traditional way. This experience has shown the working hypothesis and opens up the possibility of new lines of work to academic and technological levels that will be explored in the near future. This technology provides a wide range of options to address the formal aspect of a part to be performed for the field of design, architecture, industrial design, the traditional pottery, ceramic art, etc., which allow you to amplify the formal possibilities, save time and therefore costs when drafting the necessary and appropriate matrixes to each requirement.
Projeto assistido por computador (CAD) é bem conhecido por várias décadas e empregado na fabricação cerâmica desde o início, mas usualmente empregado na primeira parte dos processos na concepção do projeto, nem na prototipagem, nem nas fases de fabricação. As máquinas de prototipagem rápida, também conhecidas como impressoras 3D têm a capacidade de produzir, em poucas horas, peças utilizando materiais plásticos de alta resistência, com grande precisão e similaridade com relação ao original, com base em modelos digitais inéditos produzidos por meio de modelagem com softwares de projeto específico ou a partir da digitalização das peças existentes, utilizando os chamados scanners 3D. O principal objetivo deste trabalho é desenvolver a metodologia utilizada em todo o processo de construção de uma parte em cerâmica da inter-relação entre as técnicas tradicionais e novas tecnologias para a fabricação de protótipos. E para aproveitar os benefícios que nos permitem esta nova tecnologia de reprodução. A experiência baseou-se na geração de uma peça complexa, em formato digital, que serviu como modelo. Um icosaedro regular de 15 cm, complexo o suficiente para não sugerir a produção do modelo por meio das técnicas tradicionais cerâmicas (manual ou mecânica). A partir deste modelo digital, um molde de gesso feito na maneira tradicional para colagem por barbotina de massas à base de argila, secagem livre ao ar, queimada e esmaltada de maneira tradicional. Esta experiência mostrou a hipótese de trabalho e abre a possibilidade de novas linhas de trabalho a níveis acadêmicos e tecnológicos que serão explorados em um futuro próximo. Esta tecnologia oferece uma grande variedade de opções para lidar com o aspecto formal de uma peça a ser executada no campo do projeto, arquitetura, projeto industrial, a cerâmica tradicional, a arte cerâmica, etc., que permitem ampliar as possibilidades formais, economizar tempo e, portanto, os custos na elaboração das matrizes necessárias e adequadas para cada exigência.
Centro de Tecnología de Recursos Minerales y Cerámica
description Computer assisted designing (CAD) is well known for several decades and employed for ceramic manufacturing almost since the beginning, but usually employed in the first part of the projectual ideation processes, neither in the prototyping nor in the manufacturing stages. The rapid prototyping machines, also known as 3D printers, have the capacity to produce in a few hours real pieces using plastic materials of high resistance, with great precision and similarity with respect to the original, based on unprecedented digital models produced by means of modeling with specific design software or from the digitalization of existing parts using the so-called 3D scanners. The main objective of the work is to develop the methodology used in the entire process of building a part in ceramics from the interrelationship between traditional techniques and new technologies for the manufacture of prototypes. And to take advantage of the benefits that allow us this new reproduction technology. The experience was based on the generation of a complex piece, in digital format, which served as the model. A regular 15 cm icosahedron presented features complex enough not to advise the production of the model by means of the traditional techniques of ceramics (manual or mechanical). From this digital model, a plaster mold was made in the traditional way in order to slip cast clay based slurries, freely dried in air and fired and glazed in the traditional way. This experience has shown the working hypothesis and opens up the possibility of new lines of work to academic and technological levels that will be explored in the near future. This technology provides a wide range of options to address the formal aspect of a part to be performed for the field of design, architecture, industrial design, the traditional pottery, ceramic art, etc., which allow you to amplify the formal possibilities, save time and therefore costs when drafting the necessary and appropriate matrixes to each requirement.
publishDate 2014
dc.date.none.fl_str_mv 2014-12
dc.type.none.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
Articulo
http://purl.org/coar/resource_type/c_6501
info:ar-repo/semantics/articulo
format article
status_str publishedVersion
dc.identifier.none.fl_str_mv http://sedici.unlp.edu.ar/handle/10915/104358
url http://sedici.unlp.edu.ar/handle/10915/104358
dc.language.none.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv info:eu-repo/semantics/altIdentifier/url/http://hdl.handle.net/11336/43025
info:eu-repo/semantics/altIdentifier/issn/1678-4553
info:eu-repo/semantics/altIdentifier/doi/10.1590/S0366-69132014000400003
info:eu-repo/semantics/altIdentifier/hdl/11336/43025
dc.rights.none.fl_str_mv info:eu-repo/semantics/openAccess
http://creativecommons.org/licenses/by-nc/4.0/
Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0)
eu_rights_str_mv openAccess
rights_invalid_str_mv http://creativecommons.org/licenses/by-nc/4.0/
Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0)
dc.format.none.fl_str_mv application/pdf
465-470
dc.source.none.fl_str_mv reponame:SEDICI (UNLP)
instname:Universidad Nacional de La Plata
instacron:UNLP
reponame_str SEDICI (UNLP)
collection SEDICI (UNLP)
instname_str Universidad Nacional de La Plata
instacron_str UNLP
institution UNLP
repository.name.fl_str_mv SEDICI (UNLP) - Universidad Nacional de La Plata
repository.mail.fl_str_mv alira@sedici.unlp.edu.ar
_version_ 1844616103071842304
score 13.070432