Electrical behavior of BaSnO3 bulk samples formed by slip casting: Effect of synthesis methods used for obtaining the ceramic powders

Autores
Ochoa Muñoz, Yasser Halil; Schipani, Federico; Aldao, Celso Manuel; Ponce, Miguel Adolfo; Savú, Raluca; Rodriguez Paez, Jorge Enrique
Año de publicación
2016
Idioma
inglés
Tipo de recurso
artículo
Estado
versión publicada
Descripción
In order to build bulk pieces using the slip casting technique, barium stannate (BaSnO3) ceramic powders were synthesized using two chemical methods (controlled precipitation and Pechini). Differences in the electrical behavior of the pieces, depending on the synthesis method employed, were then determined. For the analysis, a stable suspension of the synthesized ceramic powder (or 57.6% solids slip) was obtained using water as solvent; the slip was poured into a mold to produce parallelepiped shaped green pieces. The electrical behavior in air at 300 C was determined for pieces sintered using a range of temperatures. The results of this electrical characterization showed that the method of synthesis has strong effects on the electrical behavior of the sintered samples
Fil: Ochoa Muñoz, Yasser Halil. Universidad de Cauca; Colombia
Fil: Schipani, Federico. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; Argentina
Fil: Aldao, Celso Manuel. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; Argentina
Fil: Ponce, Miguel Adolfo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; Argentina
Fil: Savú, Raluca. Universidade Estadual de Campinas; Brasil
Fil: Rodriguez Paez, Jorge Enrique. Universidad de Cauca; Colombia
Materia
Ceramics
Chemical synthesis
Electron microscopy
Electrical properties
Impedance spectroscopy
Defects
Nivel de accesibilidad
acceso abierto
Condiciones de uso
https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
Repositorio
CONICET Digital (CONICET)
Institución
Consejo Nacional de Investigaciones Científicas y Técnicas
OAI Identificador
oai:ri.conicet.gov.ar:11336/33392

id CONICETDig_4b1c2d1711f135825ada8ad8bd0c76dc
oai_identifier_str oai:ri.conicet.gov.ar:11336/33392
network_acronym_str CONICETDig
repository_id_str 3498
network_name_str CONICET Digital (CONICET)
spelling Electrical behavior of BaSnO3 bulk samples formed by slip casting: Effect of synthesis methods used for obtaining the ceramic powdersOchoa Muñoz, Yasser HalilSchipani, FedericoAldao, Celso ManuelPonce, Miguel AdolfoSavú, RalucaRodriguez Paez, Jorge EnriqueCeramicsChemical synthesisElectron microscopyElectrical propertiesImpedance spectroscopyDefectshttps://purl.org/becyt/ford/1.4https://purl.org/becyt/ford/1https://purl.org/becyt/ford/2.5https://purl.org/becyt/ford/2In order to build bulk pieces using the slip casting technique, barium stannate (BaSnO3) ceramic powders were synthesized using two chemical methods (controlled precipitation and Pechini). Differences in the electrical behavior of the pieces, depending on the synthesis method employed, were then determined. For the analysis, a stable suspension of the synthesized ceramic powder (or 57.6% solids slip) was obtained using water as solvent; the slip was poured into a mold to produce parallelepiped shaped green pieces. The electrical behavior in air at 300 C was determined for pieces sintered using a range of temperatures. The results of this electrical characterization showed that the method of synthesis has strong effects on the electrical behavior of the sintered samplesFil: Ochoa Muñoz, Yasser Halil. Universidad de Cauca; ColombiaFil: Schipani, Federico. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaFil: Aldao, Celso Manuel. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaFil: Ponce, Miguel Adolfo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaFil: Savú, Raluca. Universidade Estadual de Campinas; BrasilFil: Rodriguez Paez, Jorge Enrique. Universidad de Cauca; ColombiaPergamon-Elsevier Science Ltd.2016-02-26info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionhttp://purl.org/coar/resource_type/c_6501info:ar-repo/semantics/articuloapplication/pdfapplication/pdfapplication/pdfapplication/pdfhttp://hdl.handle.net/11336/33392Ponce, Miguel Adolfo; Schipani, Federico; Savú, Raluca; Rodriguez Paez, Jorge Enrique; Aldao, Celso Manuel; Ochoa Muñoz, Yasser Halil; et al.; Electrical behavior of BaSnO3 bulk samples formed by slip casting: Effect of synthesis methods used for obtaining the ceramic powders; Pergamon-Elsevier Science Ltd.; Materials Research Bulletin; 78; 26-2-2016; 172-1780025-5408CONICET DigitalCONICETenginfo:eu-repo/semantics/altIdentifier/url/http://www.sciencedirect.com/science/article/pii/S0025540816300915info:eu-repo/semantics/altIdentifier/doi/10.1016/j.materresbull.2016.02.037info:eu-repo/semantics/openAccesshttps://creativecommons.org/licenses/by-nc-sa/2.5/ar/reponame:CONICET Digital (CONICET)instname:Consejo Nacional de Investigaciones Científicas y Técnicas2025-09-29T10:23:09Zoai:ri.conicet.gov.ar:11336/33392instacron:CONICETInstitucionalhttp://ri.conicet.gov.ar/Organismo científico-tecnológicoNo correspondehttp://ri.conicet.gov.ar/oai/requestdasensio@conicet.gov.ar; lcarlino@conicet.gov.arArgentinaNo correspondeNo correspondeNo correspondeopendoar:34982025-09-29 10:23:09.449CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicasfalse
dc.title.none.fl_str_mv Electrical behavior of BaSnO3 bulk samples formed by slip casting: Effect of synthesis methods used for obtaining the ceramic powders
title Electrical behavior of BaSnO3 bulk samples formed by slip casting: Effect of synthesis methods used for obtaining the ceramic powders
spellingShingle Electrical behavior of BaSnO3 bulk samples formed by slip casting: Effect of synthesis methods used for obtaining the ceramic powders
Ochoa Muñoz, Yasser Halil
Ceramics
Chemical synthesis
Electron microscopy
Electrical properties
Impedance spectroscopy
Defects
title_short Electrical behavior of BaSnO3 bulk samples formed by slip casting: Effect of synthesis methods used for obtaining the ceramic powders
title_full Electrical behavior of BaSnO3 bulk samples formed by slip casting: Effect of synthesis methods used for obtaining the ceramic powders
title_fullStr Electrical behavior of BaSnO3 bulk samples formed by slip casting: Effect of synthesis methods used for obtaining the ceramic powders
title_full_unstemmed Electrical behavior of BaSnO3 bulk samples formed by slip casting: Effect of synthesis methods used for obtaining the ceramic powders
title_sort Electrical behavior of BaSnO3 bulk samples formed by slip casting: Effect of synthesis methods used for obtaining the ceramic powders
dc.creator.none.fl_str_mv Ochoa Muñoz, Yasser Halil
Schipani, Federico
Aldao, Celso Manuel
Ponce, Miguel Adolfo
Savú, Raluca
Rodriguez Paez, Jorge Enrique
author Ochoa Muñoz, Yasser Halil
author_facet Ochoa Muñoz, Yasser Halil
Schipani, Federico
Aldao, Celso Manuel
Ponce, Miguel Adolfo
Savú, Raluca
Rodriguez Paez, Jorge Enrique
author_role author
author2 Schipani, Federico
Aldao, Celso Manuel
Ponce, Miguel Adolfo
Savú, Raluca
Rodriguez Paez, Jorge Enrique
author2_role author
author
author
author
author
dc.subject.none.fl_str_mv Ceramics
Chemical synthesis
Electron microscopy
Electrical properties
Impedance spectroscopy
Defects
topic Ceramics
Chemical synthesis
Electron microscopy
Electrical properties
Impedance spectroscopy
Defects
purl_subject.fl_str_mv https://purl.org/becyt/ford/1.4
https://purl.org/becyt/ford/1
https://purl.org/becyt/ford/2.5
https://purl.org/becyt/ford/2
dc.description.none.fl_txt_mv In order to build bulk pieces using the slip casting technique, barium stannate (BaSnO3) ceramic powders were synthesized using two chemical methods (controlled precipitation and Pechini). Differences in the electrical behavior of the pieces, depending on the synthesis method employed, were then determined. For the analysis, a stable suspension of the synthesized ceramic powder (or 57.6% solids slip) was obtained using water as solvent; the slip was poured into a mold to produce parallelepiped shaped green pieces. The electrical behavior in air at 300 C was determined for pieces sintered using a range of temperatures. The results of this electrical characterization showed that the method of synthesis has strong effects on the electrical behavior of the sintered samples
Fil: Ochoa Muñoz, Yasser Halil. Universidad de Cauca; Colombia
Fil: Schipani, Federico. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; Argentina
Fil: Aldao, Celso Manuel. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; Argentina
Fil: Ponce, Miguel Adolfo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; Argentina
Fil: Savú, Raluca. Universidade Estadual de Campinas; Brasil
Fil: Rodriguez Paez, Jorge Enrique. Universidad de Cauca; Colombia
description In order to build bulk pieces using the slip casting technique, barium stannate (BaSnO3) ceramic powders were synthesized using two chemical methods (controlled precipitation and Pechini). Differences in the electrical behavior of the pieces, depending on the synthesis method employed, were then determined. For the analysis, a stable suspension of the synthesized ceramic powder (or 57.6% solids slip) was obtained using water as solvent; the slip was poured into a mold to produce parallelepiped shaped green pieces. The electrical behavior in air at 300 C was determined for pieces sintered using a range of temperatures. The results of this electrical characterization showed that the method of synthesis has strong effects on the electrical behavior of the sintered samples
publishDate 2016
dc.date.none.fl_str_mv 2016-02-26
dc.type.none.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
http://purl.org/coar/resource_type/c_6501
info:ar-repo/semantics/articulo
format article
status_str publishedVersion
dc.identifier.none.fl_str_mv http://hdl.handle.net/11336/33392
Ponce, Miguel Adolfo; Schipani, Federico; Savú, Raluca; Rodriguez Paez, Jorge Enrique; Aldao, Celso Manuel; Ochoa Muñoz, Yasser Halil; et al.; Electrical behavior of BaSnO3 bulk samples formed by slip casting: Effect of synthesis methods used for obtaining the ceramic powders; Pergamon-Elsevier Science Ltd.; Materials Research Bulletin; 78; 26-2-2016; 172-178
0025-5408
CONICET Digital
CONICET
url http://hdl.handle.net/11336/33392
identifier_str_mv Ponce, Miguel Adolfo; Schipani, Federico; Savú, Raluca; Rodriguez Paez, Jorge Enrique; Aldao, Celso Manuel; Ochoa Muñoz, Yasser Halil; et al.; Electrical behavior of BaSnO3 bulk samples formed by slip casting: Effect of synthesis methods used for obtaining the ceramic powders; Pergamon-Elsevier Science Ltd.; Materials Research Bulletin; 78; 26-2-2016; 172-178
0025-5408
CONICET Digital
CONICET
dc.language.none.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv info:eu-repo/semantics/altIdentifier/url/http://www.sciencedirect.com/science/article/pii/S0025540816300915
info:eu-repo/semantics/altIdentifier/doi/10.1016/j.materresbull.2016.02.037
dc.rights.none.fl_str_mv info:eu-repo/semantics/openAccess
https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
eu_rights_str_mv openAccess
rights_invalid_str_mv https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
dc.format.none.fl_str_mv application/pdf
application/pdf
application/pdf
application/pdf
dc.publisher.none.fl_str_mv Pergamon-Elsevier Science Ltd.
publisher.none.fl_str_mv Pergamon-Elsevier Science Ltd.
dc.source.none.fl_str_mv reponame:CONICET Digital (CONICET)
instname:Consejo Nacional de Investigaciones Científicas y Técnicas
reponame_str CONICET Digital (CONICET)
collection CONICET Digital (CONICET)
instname_str Consejo Nacional de Investigaciones Científicas y Técnicas
repository.name.fl_str_mv CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicas
repository.mail.fl_str_mv dasensio@conicet.gov.ar; lcarlino@conicet.gov.ar
_version_ 1844614225374216192
score 13.070432