Review: Effect of the combined application of edible coatings and osmotic dehydration on the performance of the process and the quality of pear cubes

Autores
Rodriguez Racca, Anabel; Soteras, Edgar Mario; Campañone, Laura Analía
Año de publicación
2021
Idioma
inglés
Tipo de recurso
artículo
Estado
versión aceptada
Descripción
The objective of the present work was to evaluate the combined effect of the application of edible coatings (sodium alginate and low methoxyl pectin) and different osmotic dehydration conditions (sucrose solution: 40 and 60 °Brix, temperatures: 20 and 40 °C, and times: 1, 2, 4, 8 and 16 h) on pear cubes (water loss, solid gain, performance ratio, the total color differences, mechanical properties, phenolic content, and sensory analysis). The results indicated that samples coated with low methoxyl pectin and treated under 60°Brix for 16 h at both temperatures (20 and 40 °C) presented the best process performance. Statistical analysis showed that the application of the coatings resulted in greater firmness and stiffness of the pear cubes at the end of osmotic dehydration. Besides, alginate coating best preserved the phenolic content (31.4%) than uncoated (26.04%) and pectin-coated (20.77%) ones. However, total color differences were not improved with the use of edible coatings (alginate or pectin). In terms of quality, the samples coated with both hydrogels had good overall acceptability by the evaluators and good mechanical properties. However, further studies are required to decrease the difference in color and leaching of bioactive compounds in pear cubes due to the osmotic dehydration treatment. Resumen: El objetivo del presente trabajo fue evaluar el efecto combinado de la aplicación de recubrimientos comestibles (alginato de sodio y pectina baja en metoxilo) y diferentes condiciones de deshidratación osmótica (solución de sacarosa: 40 y 60 ° Brix, temperaturas: 20 y 40 ° C, y tiempos: 1, 2, 4, 8 y 16 h) en cubos de pera (pérdida de agua, ganancia de sólidos, relación de rendimiento, diferencias de color totales, propiedades mecánicas, contenido fenólico y análisis sensorial). Los resultados indicaron que las muestras recubiertas con pectina de bajo metoxilo y tratadas bajo 60 ° Brix durante 16 horas a ambas temperaturas (20 y 40 ° C) presentaron el mejor rendimiento del proceso. El análisis estadístico mostró que la aplicación de los recubrimientos resultó en una mayor firmeza y rigidez de los cubos de pera al final de la deshidratación osmótica. Además, el recubrimiento de alginato conservó mejor el contenido fenólico (31,4%) que los no recubiertos (26,04%) y recubiertos de pectina (20,77%). Sin embargo, las diferencias de color totales no mejoraron con el uso de revestimientos comestibles (alginato o pectina). En términos de calidad, las muestras recubiertas con ambos hidrogeles tuvieron una buena aceptabilidad general por parte de los evaluadores y buenas propiedades mecánicas. Sin embargo, se requieren más estudios para disminuir la diferencia de color y la lixiviación de compuestos bioactivos en cubos de pera debido al tratamiento de deshidratación osmótica.
Instituto de Investigación de Tecnología de Alimentos
Fil: Rodriguez, Anabel. Instituto Nacional de Tecnología Agropecuaria (INTA). Instituto de Investigación Tecnología de Alimentos; Argentina.
Fil: Rodriguez, Anabel. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina.
Fil: Soteras, Edgar Mario. Universidad Nacional de San Luis; Argentina.
Fil: Campañone, Laura Analía. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina.
Fil: Campañone, Laura Analía. Centro de Investigación y Desarrollo en Criotecnología de Alimentos (CIDA-CONICET-UNLP); Argentina.
Fuente
International Journal of Food Science & Technology (First published: 17 September 2021)
Materia
Pears
Sucrose
Edible Films
Osmotic Drying
Pera
Sucrosa
Film Comestible
Secado Osmótico
Pear Cubes
Cubed Fruit
Sucrose Solution
Edible Coating
Solución de Sacarosa
Recubrimiento Comestible
Deshidratación Osmótica
Nivel de accesibilidad
acceso restringido
Condiciones de uso
Repositorio
INTA Digital (INTA)
Institución
Instituto Nacional de Tecnología Agropecuaria
OAI Identificador
oai:localhost:20.500.12123/10325

id INTADig_9f11a5c6fc319e059529138f78321ea5
oai_identifier_str oai:localhost:20.500.12123/10325
network_acronym_str INTADig
repository_id_str l
network_name_str INTA Digital (INTA)
spelling Review: Effect of the combined application of edible coatings and osmotic dehydration on the performance of the process and the quality of pear cubesRodriguez Racca, AnabelSoteras, Edgar MarioCampañone, Laura AnalíaPearsSucroseEdible FilmsOsmotic DryingPeraSucrosaFilm ComestibleSecado OsmóticoPear CubesCubed FruitSucrose SolutionEdible CoatingSolución de SacarosaRecubrimiento ComestibleDeshidratación OsmóticaThe objective of the present work was to evaluate the combined effect of the application of edible coatings (sodium alginate and low methoxyl pectin) and different osmotic dehydration conditions (sucrose solution: 40 and 60 °Brix, temperatures: 20 and 40 °C, and times: 1, 2, 4, 8 and 16 h) on pear cubes (water loss, solid gain, performance ratio, the total color differences, mechanical properties, phenolic content, and sensory analysis). The results indicated that samples coated with low methoxyl pectin and treated under 60°Brix for 16 h at both temperatures (20 and 40 °C) presented the best process performance. Statistical analysis showed that the application of the coatings resulted in greater firmness and stiffness of the pear cubes at the end of osmotic dehydration. Besides, alginate coating best preserved the phenolic content (31.4%) than uncoated (26.04%) and pectin-coated (20.77%) ones. However, total color differences were not improved with the use of edible coatings (alginate or pectin). In terms of quality, the samples coated with both hydrogels had good overall acceptability by the evaluators and good mechanical properties. However, further studies are required to decrease the difference in color and leaching of bioactive compounds in pear cubes due to the osmotic dehydration treatment. Resumen: El objetivo del presente trabajo fue evaluar el efecto combinado de la aplicación de recubrimientos comestibles (alginato de sodio y pectina baja en metoxilo) y diferentes condiciones de deshidratación osmótica (solución de sacarosa: 40 y 60 ° Brix, temperaturas: 20 y 40 ° C, y tiempos: 1, 2, 4, 8 y 16 h) en cubos de pera (pérdida de agua, ganancia de sólidos, relación de rendimiento, diferencias de color totales, propiedades mecánicas, contenido fenólico y análisis sensorial). Los resultados indicaron que las muestras recubiertas con pectina de bajo metoxilo y tratadas bajo 60 ° Brix durante 16 horas a ambas temperaturas (20 y 40 ° C) presentaron el mejor rendimiento del proceso. El análisis estadístico mostró que la aplicación de los recubrimientos resultó en una mayor firmeza y rigidez de los cubos de pera al final de la deshidratación osmótica. Además, el recubrimiento de alginato conservó mejor el contenido fenólico (31,4%) que los no recubiertos (26,04%) y recubiertos de pectina (20,77%). Sin embargo, las diferencias de color totales no mejoraron con el uso de revestimientos comestibles (alginato o pectina). En términos de calidad, las muestras recubiertas con ambos hidrogeles tuvieron una buena aceptabilidad general por parte de los evaluadores y buenas propiedades mecánicas. Sin embargo, se requieren más estudios para disminuir la diferencia de color y la lixiviación de compuestos bioactivos en cubos de pera debido al tratamiento de deshidratación osmótica.Instituto de Investigación de Tecnología de AlimentosFil: Rodriguez, Anabel. Instituto Nacional de Tecnología Agropecuaria (INTA). Instituto de Investigación Tecnología de Alimentos; Argentina.Fil: Rodriguez, Anabel. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina.Fil: Soteras, Edgar Mario. Universidad Nacional de San Luis; Argentina.Fil: Campañone, Laura Analía. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina.Fil: Campañone, Laura Analía. Centro de Investigación y Desarrollo en Criotecnología de Alimentos (CIDA-CONICET-UNLP); Argentina.info:eu-repo/date/embargoEnd/2022-09-222021-09-22T16:57:46Z2021-09-22T16:57:46Z2021-09-17info:eu-repo/semantics/articleinfo:eu-repo/semantics/acceptedVersionhttp://purl.org/coar/resource_type/c_6501info:ar-repo/semantics/articuloapplication/pdfhttp://hdl.handle.net/20.500.12123/10325https://ifst.onlinelibrary.wiley.com/doi/10.1111/ijfs.153571365-26210950-5423https://doi.org/10.1111/ijfs.15357International Journal of Food Science & Technology (First published: 17 September 2021)reponame:INTA Digital (INTA)instname:Instituto Nacional de Tecnología Agropecuariaenginfo:eu-repo/semantics/restrictedAccess2025-09-04T09:49:06Zoai:localhost:20.500.12123/10325instacron:INTAInstitucionalhttp://repositorio.inta.gob.ar/Organismo científico-tecnológicoNo correspondehttp://repositorio.inta.gob.ar/oai/requesttripaldi.nicolas@inta.gob.arArgentinaNo correspondeNo correspondeNo correspondeopendoar:l2025-09-04 09:49:06.975INTA Digital (INTA) - Instituto Nacional de Tecnología Agropecuariafalse
dc.title.none.fl_str_mv Review: Effect of the combined application of edible coatings and osmotic dehydration on the performance of the process and the quality of pear cubes
title Review: Effect of the combined application of edible coatings and osmotic dehydration on the performance of the process and the quality of pear cubes
spellingShingle Review: Effect of the combined application of edible coatings and osmotic dehydration on the performance of the process and the quality of pear cubes
Rodriguez Racca, Anabel
Pears
Sucrose
Edible Films
Osmotic Drying
Pera
Sucrosa
Film Comestible
Secado Osmótico
Pear Cubes
Cubed Fruit
Sucrose Solution
Edible Coating
Solución de Sacarosa
Recubrimiento Comestible
Deshidratación Osmótica
title_short Review: Effect of the combined application of edible coatings and osmotic dehydration on the performance of the process and the quality of pear cubes
title_full Review: Effect of the combined application of edible coatings and osmotic dehydration on the performance of the process and the quality of pear cubes
title_fullStr Review: Effect of the combined application of edible coatings and osmotic dehydration on the performance of the process and the quality of pear cubes
title_full_unstemmed Review: Effect of the combined application of edible coatings and osmotic dehydration on the performance of the process and the quality of pear cubes
title_sort Review: Effect of the combined application of edible coatings and osmotic dehydration on the performance of the process and the quality of pear cubes
dc.creator.none.fl_str_mv Rodriguez Racca, Anabel
Soteras, Edgar Mario
Campañone, Laura Analía
author Rodriguez Racca, Anabel
author_facet Rodriguez Racca, Anabel
Soteras, Edgar Mario
Campañone, Laura Analía
author_role author
author2 Soteras, Edgar Mario
Campañone, Laura Analía
author2_role author
author
dc.subject.none.fl_str_mv Pears
Sucrose
Edible Films
Osmotic Drying
Pera
Sucrosa
Film Comestible
Secado Osmótico
Pear Cubes
Cubed Fruit
Sucrose Solution
Edible Coating
Solución de Sacarosa
Recubrimiento Comestible
Deshidratación Osmótica
topic Pears
Sucrose
Edible Films
Osmotic Drying
Pera
Sucrosa
Film Comestible
Secado Osmótico
Pear Cubes
Cubed Fruit
Sucrose Solution
Edible Coating
Solución de Sacarosa
Recubrimiento Comestible
Deshidratación Osmótica
dc.description.none.fl_txt_mv The objective of the present work was to evaluate the combined effect of the application of edible coatings (sodium alginate and low methoxyl pectin) and different osmotic dehydration conditions (sucrose solution: 40 and 60 °Brix, temperatures: 20 and 40 °C, and times: 1, 2, 4, 8 and 16 h) on pear cubes (water loss, solid gain, performance ratio, the total color differences, mechanical properties, phenolic content, and sensory analysis). The results indicated that samples coated with low methoxyl pectin and treated under 60°Brix for 16 h at both temperatures (20 and 40 °C) presented the best process performance. Statistical analysis showed that the application of the coatings resulted in greater firmness and stiffness of the pear cubes at the end of osmotic dehydration. Besides, alginate coating best preserved the phenolic content (31.4%) than uncoated (26.04%) and pectin-coated (20.77%) ones. However, total color differences were not improved with the use of edible coatings (alginate or pectin). In terms of quality, the samples coated with both hydrogels had good overall acceptability by the evaluators and good mechanical properties. However, further studies are required to decrease the difference in color and leaching of bioactive compounds in pear cubes due to the osmotic dehydration treatment. Resumen: El objetivo del presente trabajo fue evaluar el efecto combinado de la aplicación de recubrimientos comestibles (alginato de sodio y pectina baja en metoxilo) y diferentes condiciones de deshidratación osmótica (solución de sacarosa: 40 y 60 ° Brix, temperaturas: 20 y 40 ° C, y tiempos: 1, 2, 4, 8 y 16 h) en cubos de pera (pérdida de agua, ganancia de sólidos, relación de rendimiento, diferencias de color totales, propiedades mecánicas, contenido fenólico y análisis sensorial). Los resultados indicaron que las muestras recubiertas con pectina de bajo metoxilo y tratadas bajo 60 ° Brix durante 16 horas a ambas temperaturas (20 y 40 ° C) presentaron el mejor rendimiento del proceso. El análisis estadístico mostró que la aplicación de los recubrimientos resultó en una mayor firmeza y rigidez de los cubos de pera al final de la deshidratación osmótica. Además, el recubrimiento de alginato conservó mejor el contenido fenólico (31,4%) que los no recubiertos (26,04%) y recubiertos de pectina (20,77%). Sin embargo, las diferencias de color totales no mejoraron con el uso de revestimientos comestibles (alginato o pectina). En términos de calidad, las muestras recubiertas con ambos hidrogeles tuvieron una buena aceptabilidad general por parte de los evaluadores y buenas propiedades mecánicas. Sin embargo, se requieren más estudios para disminuir la diferencia de color y la lixiviación de compuestos bioactivos en cubos de pera debido al tratamiento de deshidratación osmótica.
Instituto de Investigación de Tecnología de Alimentos
Fil: Rodriguez, Anabel. Instituto Nacional de Tecnología Agropecuaria (INTA). Instituto de Investigación Tecnología de Alimentos; Argentina.
Fil: Rodriguez, Anabel. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina.
Fil: Soteras, Edgar Mario. Universidad Nacional de San Luis; Argentina.
Fil: Campañone, Laura Analía. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina.
Fil: Campañone, Laura Analía. Centro de Investigación y Desarrollo en Criotecnología de Alimentos (CIDA-CONICET-UNLP); Argentina.
description The objective of the present work was to evaluate the combined effect of the application of edible coatings (sodium alginate and low methoxyl pectin) and different osmotic dehydration conditions (sucrose solution: 40 and 60 °Brix, temperatures: 20 and 40 °C, and times: 1, 2, 4, 8 and 16 h) on pear cubes (water loss, solid gain, performance ratio, the total color differences, mechanical properties, phenolic content, and sensory analysis). The results indicated that samples coated with low methoxyl pectin and treated under 60°Brix for 16 h at both temperatures (20 and 40 °C) presented the best process performance. Statistical analysis showed that the application of the coatings resulted in greater firmness and stiffness of the pear cubes at the end of osmotic dehydration. Besides, alginate coating best preserved the phenolic content (31.4%) than uncoated (26.04%) and pectin-coated (20.77%) ones. However, total color differences were not improved with the use of edible coatings (alginate or pectin). In terms of quality, the samples coated with both hydrogels had good overall acceptability by the evaluators and good mechanical properties. However, further studies are required to decrease the difference in color and leaching of bioactive compounds in pear cubes due to the osmotic dehydration treatment. Resumen: El objetivo del presente trabajo fue evaluar el efecto combinado de la aplicación de recubrimientos comestibles (alginato de sodio y pectina baja en metoxilo) y diferentes condiciones de deshidratación osmótica (solución de sacarosa: 40 y 60 ° Brix, temperaturas: 20 y 40 ° C, y tiempos: 1, 2, 4, 8 y 16 h) en cubos de pera (pérdida de agua, ganancia de sólidos, relación de rendimiento, diferencias de color totales, propiedades mecánicas, contenido fenólico y análisis sensorial). Los resultados indicaron que las muestras recubiertas con pectina de bajo metoxilo y tratadas bajo 60 ° Brix durante 16 horas a ambas temperaturas (20 y 40 ° C) presentaron el mejor rendimiento del proceso. El análisis estadístico mostró que la aplicación de los recubrimientos resultó en una mayor firmeza y rigidez de los cubos de pera al final de la deshidratación osmótica. Además, el recubrimiento de alginato conservó mejor el contenido fenólico (31,4%) que los no recubiertos (26,04%) y recubiertos de pectina (20,77%). Sin embargo, las diferencias de color totales no mejoraron con el uso de revestimientos comestibles (alginato o pectina). En términos de calidad, las muestras recubiertas con ambos hidrogeles tuvieron una buena aceptabilidad general por parte de los evaluadores y buenas propiedades mecánicas. Sin embargo, se requieren más estudios para disminuir la diferencia de color y la lixiviación de compuestos bioactivos en cubos de pera debido al tratamiento de deshidratación osmótica.
publishDate 2021
dc.date.none.fl_str_mv 2021-09-22T16:57:46Z
2021-09-22T16:57:46Z
2021-09-17
info:eu-repo/date/embargoEnd/2022-09-22
dc.type.none.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/acceptedVersion
http://purl.org/coar/resource_type/c_6501
info:ar-repo/semantics/articulo
format article
status_str acceptedVersion
dc.identifier.none.fl_str_mv http://hdl.handle.net/20.500.12123/10325
https://ifst.onlinelibrary.wiley.com/doi/10.1111/ijfs.15357
1365-2621
0950-5423
https://doi.org/10.1111/ijfs.15357
url http://hdl.handle.net/20.500.12123/10325
https://ifst.onlinelibrary.wiley.com/doi/10.1111/ijfs.15357
https://doi.org/10.1111/ijfs.15357
identifier_str_mv 1365-2621
0950-5423
dc.language.none.fl_str_mv eng
language eng
dc.rights.none.fl_str_mv info:eu-repo/semantics/restrictedAccess
eu_rights_str_mv restrictedAccess
dc.format.none.fl_str_mv application/pdf
dc.source.none.fl_str_mv International Journal of Food Science & Technology (First published: 17 September 2021)
reponame:INTA Digital (INTA)
instname:Instituto Nacional de Tecnología Agropecuaria
reponame_str INTA Digital (INTA)
collection INTA Digital (INTA)
instname_str Instituto Nacional de Tecnología Agropecuaria
repository.name.fl_str_mv INTA Digital (INTA) - Instituto Nacional de Tecnología Agropecuaria
repository.mail.fl_str_mv tripaldi.nicolas@inta.gob.ar
_version_ 1842341390766309376
score 12.623145