Experimental design optimization of the tetralin hydrogenation over Ir-Pt-SBA-15

Autores
Vallés, Verónica Alejandra; Ledesma, Brenda Cecilia Soledad; Rivoira, Lorena Paola; Cussa, Jorgelina; Anunziata, Oscar Alfredo; Beltramone, Andrea Raquel
Año de publicación
2016
Idioma
inglés
Tipo de recurso
artículo
Estado
versión publicada
Descripción
Experiment design-response surface methodology (RSM) is used in this work to model and optimize two responses in the hydrogenation of tetralin to decalin using bimetallic Ir-Pt-SBA-15 catalyst. In this study, we analyze the influence of the nature of the catalyst (metal molar fraction and metal loading), the catalyst/substrate ratio and the temperature of the reaction as factors for the design. The responses analyzed were conversion at 3 h and at 5 h of reaction time. The response surfaces were obtained with the Box-Behnken design, finding the best combination between the reaction parameters that allowed optimizing the process. By applying the statistic methodology, the higher levels of the two objective functions were obtained employing the catalyst with 1 wt.% of iridium and 0.7-0.8 wt.% of platinum; the optimal ratio between mass of catalyst and mole of tetralin was 17-19 g/mol and temperature between 200 and 220 °C.
Fil: Vallés, Verónica Alejandra. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba; Argentina. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación en Nanociencia y Nanotecnología; Argentina
Fil: Ledesma, Brenda Cecilia Soledad. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba; Argentina. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación en Nanociencia y Nanotecnología; Argentina
Fil: Rivoira, Lorena Paola. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba; Argentina. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación en Nanociencia y Nanotecnología; Argentina
Fil: Cussa, Jorgelina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba; Argentina. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación en Nanociencia y Nanotecnología; Argentina
Fil: Anunziata, Oscar Alfredo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba; Argentina. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación en Nanociencia y Nanotecnología; Argentina
Fil: Beltramone, Andrea Raquel. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba; Argentina. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación en Nanociencia y Nanotecnología; Argentina
Materia
Experimental Design
Iridium-Platinum Containing Sba-15
Tetralin Hydrogenation
Trans/Cis Ratio
Nivel de accesibilidad
acceso abierto
Condiciones de uso
https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
Repositorio
CONICET Digital (CONICET)
Institución
Consejo Nacional de Investigaciones Científicas y Técnicas
OAI Identificador
oai:ri.conicet.gov.ar:11336/69312

id CONICETDig_f8363ff54fe641ae18dd84f8eef4187c
oai_identifier_str oai:ri.conicet.gov.ar:11336/69312
network_acronym_str CONICETDig
repository_id_str 3498
network_name_str CONICET Digital (CONICET)
spelling Experimental design optimization of the tetralin hydrogenation over Ir-Pt-SBA-15Vallés, Verónica AlejandraLedesma, Brenda Cecilia SoledadRivoira, Lorena PaolaCussa, JorgelinaAnunziata, Oscar AlfredoBeltramone, Andrea RaquelExperimental DesignIridium-Platinum Containing Sba-15Tetralin HydrogenationTrans/Cis RatioExperiment design-response surface methodology (RSM) is used in this work to model and optimize two responses in the hydrogenation of tetralin to decalin using bimetallic Ir-Pt-SBA-15 catalyst. In this study, we analyze the influence of the nature of the catalyst (metal molar fraction and metal loading), the catalyst/substrate ratio and the temperature of the reaction as factors for the design. The responses analyzed were conversion at 3 h and at 5 h of reaction time. The response surfaces were obtained with the Box-Behnken design, finding the best combination between the reaction parameters that allowed optimizing the process. By applying the statistic methodology, the higher levels of the two objective functions were obtained employing the catalyst with 1 wt.% of iridium and 0.7-0.8 wt.% of platinum; the optimal ratio between mass of catalyst and mole of tetralin was 17-19 g/mol and temperature between 200 and 220 °C.Fil: Vallés, Verónica Alejandra. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba; Argentina. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación en Nanociencia y Nanotecnología; ArgentinaFil: Ledesma, Brenda Cecilia Soledad. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba; Argentina. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación en Nanociencia y Nanotecnología; ArgentinaFil: Rivoira, Lorena Paola. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba; Argentina. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación en Nanociencia y Nanotecnología; ArgentinaFil: Cussa, Jorgelina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba; Argentina. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación en Nanociencia y Nanotecnología; ArgentinaFil: Anunziata, Oscar Alfredo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba; Argentina. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación en Nanociencia y Nanotecnología; ArgentinaFil: Beltramone, Andrea Raquel. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba; Argentina. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación en Nanociencia y Nanotecnología; ArgentinaElsevier Science2016-08info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionhttp://purl.org/coar/resource_type/c_6501info:ar-repo/semantics/articuloapplication/pdfapplication/pdfhttp://hdl.handle.net/11336/69312Vallés, Verónica Alejandra; Ledesma, Brenda Cecilia Soledad; Rivoira, Lorena Paola; Cussa, Jorgelina; Anunziata, Oscar Alfredo; et al.; Experimental design optimization of the tetralin hydrogenation over Ir-Pt-SBA-15; Elsevier Science; Catalysis Today; 271; 8-2016; 140-1480920-5861CONICET DigitalCONICETenginfo:eu-repo/semantics/altIdentifier/doi/10.1016/j.cattod.2015.07.018info:eu-repo/semantics/altIdentifier/url/https://www.sciencedirect.com/science/article/pii/S0920586115004095info:eu-repo/semantics/openAccesshttps://creativecommons.org/licenses/by-nc-sa/2.5/ar/reponame:CONICET Digital (CONICET)instname:Consejo Nacional de Investigaciones Científicas y Técnicas2025-09-29T09:47:02Zoai:ri.conicet.gov.ar:11336/69312instacron:CONICETInstitucionalhttp://ri.conicet.gov.ar/Organismo científico-tecnológicoNo correspondehttp://ri.conicet.gov.ar/oai/requestdasensio@conicet.gov.ar; lcarlino@conicet.gov.arArgentinaNo correspondeNo correspondeNo correspondeopendoar:34982025-09-29 09:47:02.501CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicasfalse
dc.title.none.fl_str_mv Experimental design optimization of the tetralin hydrogenation over Ir-Pt-SBA-15
title Experimental design optimization of the tetralin hydrogenation over Ir-Pt-SBA-15
spellingShingle Experimental design optimization of the tetralin hydrogenation over Ir-Pt-SBA-15
Vallés, Verónica Alejandra
Experimental Design
Iridium-Platinum Containing Sba-15
Tetralin Hydrogenation
Trans/Cis Ratio
title_short Experimental design optimization of the tetralin hydrogenation over Ir-Pt-SBA-15
title_full Experimental design optimization of the tetralin hydrogenation over Ir-Pt-SBA-15
title_fullStr Experimental design optimization of the tetralin hydrogenation over Ir-Pt-SBA-15
title_full_unstemmed Experimental design optimization of the tetralin hydrogenation over Ir-Pt-SBA-15
title_sort Experimental design optimization of the tetralin hydrogenation over Ir-Pt-SBA-15
dc.creator.none.fl_str_mv Vallés, Verónica Alejandra
Ledesma, Brenda Cecilia Soledad
Rivoira, Lorena Paola
Cussa, Jorgelina
Anunziata, Oscar Alfredo
Beltramone, Andrea Raquel
author Vallés, Verónica Alejandra
author_facet Vallés, Verónica Alejandra
Ledesma, Brenda Cecilia Soledad
Rivoira, Lorena Paola
Cussa, Jorgelina
Anunziata, Oscar Alfredo
Beltramone, Andrea Raquel
author_role author
author2 Ledesma, Brenda Cecilia Soledad
Rivoira, Lorena Paola
Cussa, Jorgelina
Anunziata, Oscar Alfredo
Beltramone, Andrea Raquel
author2_role author
author
author
author
author
dc.subject.none.fl_str_mv Experimental Design
Iridium-Platinum Containing Sba-15
Tetralin Hydrogenation
Trans/Cis Ratio
topic Experimental Design
Iridium-Platinum Containing Sba-15
Tetralin Hydrogenation
Trans/Cis Ratio
dc.description.none.fl_txt_mv Experiment design-response surface methodology (RSM) is used in this work to model and optimize two responses in the hydrogenation of tetralin to decalin using bimetallic Ir-Pt-SBA-15 catalyst. In this study, we analyze the influence of the nature of the catalyst (metal molar fraction and metal loading), the catalyst/substrate ratio and the temperature of the reaction as factors for the design. The responses analyzed were conversion at 3 h and at 5 h of reaction time. The response surfaces were obtained with the Box-Behnken design, finding the best combination between the reaction parameters that allowed optimizing the process. By applying the statistic methodology, the higher levels of the two objective functions were obtained employing the catalyst with 1 wt.% of iridium and 0.7-0.8 wt.% of platinum; the optimal ratio between mass of catalyst and mole of tetralin was 17-19 g/mol and temperature between 200 and 220 °C.
Fil: Vallés, Verónica Alejandra. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba; Argentina. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación en Nanociencia y Nanotecnología; Argentina
Fil: Ledesma, Brenda Cecilia Soledad. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba; Argentina. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación en Nanociencia y Nanotecnología; Argentina
Fil: Rivoira, Lorena Paola. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba; Argentina. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación en Nanociencia y Nanotecnología; Argentina
Fil: Cussa, Jorgelina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba; Argentina. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación en Nanociencia y Nanotecnología; Argentina
Fil: Anunziata, Oscar Alfredo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba; Argentina. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación en Nanociencia y Nanotecnología; Argentina
Fil: Beltramone, Andrea Raquel. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba; Argentina. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación en Nanociencia y Nanotecnología; Argentina
description Experiment design-response surface methodology (RSM) is used in this work to model and optimize two responses in the hydrogenation of tetralin to decalin using bimetallic Ir-Pt-SBA-15 catalyst. In this study, we analyze the influence of the nature of the catalyst (metal molar fraction and metal loading), the catalyst/substrate ratio and the temperature of the reaction as factors for the design. The responses analyzed were conversion at 3 h and at 5 h of reaction time. The response surfaces were obtained with the Box-Behnken design, finding the best combination between the reaction parameters that allowed optimizing the process. By applying the statistic methodology, the higher levels of the two objective functions were obtained employing the catalyst with 1 wt.% of iridium and 0.7-0.8 wt.% of platinum; the optimal ratio between mass of catalyst and mole of tetralin was 17-19 g/mol and temperature between 200 and 220 °C.
publishDate 2016
dc.date.none.fl_str_mv 2016-08
dc.type.none.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
http://purl.org/coar/resource_type/c_6501
info:ar-repo/semantics/articulo
format article
status_str publishedVersion
dc.identifier.none.fl_str_mv http://hdl.handle.net/11336/69312
Vallés, Verónica Alejandra; Ledesma, Brenda Cecilia Soledad; Rivoira, Lorena Paola; Cussa, Jorgelina; Anunziata, Oscar Alfredo; et al.; Experimental design optimization of the tetralin hydrogenation over Ir-Pt-SBA-15; Elsevier Science; Catalysis Today; 271; 8-2016; 140-148
0920-5861
CONICET Digital
CONICET
url http://hdl.handle.net/11336/69312
identifier_str_mv Vallés, Verónica Alejandra; Ledesma, Brenda Cecilia Soledad; Rivoira, Lorena Paola; Cussa, Jorgelina; Anunziata, Oscar Alfredo; et al.; Experimental design optimization of the tetralin hydrogenation over Ir-Pt-SBA-15; Elsevier Science; Catalysis Today; 271; 8-2016; 140-148
0920-5861
CONICET Digital
CONICET
dc.language.none.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv info:eu-repo/semantics/altIdentifier/doi/10.1016/j.cattod.2015.07.018
info:eu-repo/semantics/altIdentifier/url/https://www.sciencedirect.com/science/article/pii/S0920586115004095
dc.rights.none.fl_str_mv info:eu-repo/semantics/openAccess
https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
eu_rights_str_mv openAccess
rights_invalid_str_mv https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
dc.format.none.fl_str_mv application/pdf
application/pdf
dc.publisher.none.fl_str_mv Elsevier Science
publisher.none.fl_str_mv Elsevier Science
dc.source.none.fl_str_mv reponame:CONICET Digital (CONICET)
instname:Consejo Nacional de Investigaciones Científicas y Técnicas
reponame_str CONICET Digital (CONICET)
collection CONICET Digital (CONICET)
instname_str Consejo Nacional de Investigaciones Científicas y Técnicas
repository.name.fl_str_mv CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicas
repository.mail.fl_str_mv dasensio@conicet.gov.ar; lcarlino@conicet.gov.ar
_version_ 1844613466430636032
score 13.070432