Systematic generation of a CAPE-OPEN compliant simulation module from GAMS and FORTRAN models

Autores
Domancich, Alejandro Omar; Perez, Virginia; Hoch, Patricia Monica; Brignole, Nélida Beatriz
Año de publicación
2010
Idioma
inglés
Tipo de recurso
artículo
Estado
versión publicada
Descripción
The adaptation of complex existing modules so that they meet the CAPE-OPEN (CO) standard is important in order to take advantage of previous work done for the simulation of processes. In this work we present the design and implementation of two different Operation-Unit (OU) modules that support the CO interface. Each resulting OU satisfies the definitions and guidelines established by the standard. The first module consists of a CO-compatible component for the steady-state simulation of a multi-bed ammonia reactor, whose original code had been written in FORTRAN. The second one, which also supports the CO interface, it is a GAMS-compatible module of a reactive distillation column. In order to develop these modules, an existing CO wizard that targets the mechanical generation of the OU Package was used. This wizard generates a Visual Basic project that contains the OU's source code and its installation package. In particular, the calculation routine and the Graphical-Unit Interface (GUI) were implemented. Before implementing the interfaces, an analysis of requirements for the correct interaction between the OU and the other simulator components was carried out. Both modules embedded in HYSYS take advantage of its complete property-package, which complements GAMS and FORTRAN in order to carry out the accurate computation of the chemical and equilibrium properties. © 2009 The Institution of Chemical Engineers.
Fil: Domancich, Alejandro Omar. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Bahía Blanca. Planta Piloto de Ingeniería Química. Universidad Nacional del Sur. Planta Piloto de Ingeniería Química; Argentina. Universidad Nacional del Sur; Argentina
Fil: Perez, Virginia. Universidad Nacional del Sur; Argentina
Fil: Hoch, Patricia Monica. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Bahía Blanca. Planta Piloto de Ingeniería Química. Universidad Nacional del Sur. Planta Piloto de Ingeniería Química; Argentina. Universidad Nacional del Sur; Argentina
Fil: Brignole, Nélida Beatriz. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Bahía Blanca. Planta Piloto de Ingeniería Química. Universidad Nacional del Sur. Planta Piloto de Ingeniería Química; Argentina. Universidad Nacional del Sur; Argentina
Materia
CAPE-OPEN
GAMS
HYSYS
PROCESS SIMULATION
PROCESS-MODELING COMPONENTS
COMPONENTS
Nivel de accesibilidad
acceso abierto
Condiciones de uso
https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
Repositorio
CONICET Digital (CONICET)
Institución
Consejo Nacional de Investigaciones Científicas y Técnicas
OAI Identificador
oai:ri.conicet.gov.ar:11336/160425
Acceder
id CONICETDig_e614f29a1b61a793556955305c9d8230
oai_identifier_str oai:ri.conicet.gov.ar:11336/160425
network_acronym_str CONICETDig
repository_id_str 3498
network_name_str CONICET Digital (CONICET)
spelling Systematic generation of a CAPE-OPEN compliant simulation module from GAMS and FORTRAN modelsDomancich, Alejandro OmarPerez, VirginiaHoch, Patricia MonicaBrignole, Nélida BeatrizCAPE-OPENGAMSHYSYSPROCESS SIMULATIONPROCESS-MODELING COMPONENTSCOMPONENTShttps://purl.org/becyt/ford/2.4https://purl.org/becyt/ford/2The adaptation of complex existing modules so that they meet the CAPE-OPEN (CO) standard is important in order to take advantage of previous work done for the simulation of processes. In this work we present the design and implementation of two different Operation-Unit (OU) modules that support the CO interface. Each resulting OU satisfies the definitions and guidelines established by the standard. The first module consists of a CO-compatible component for the steady-state simulation of a multi-bed ammonia reactor, whose original code had been written in FORTRAN. The second one, which also supports the CO interface, it is a GAMS-compatible module of a reactive distillation column. In order to develop these modules, an existing CO wizard that targets the mechanical generation of the OU Package was used. This wizard generates a Visual Basic project that contains the OU's source code and its installation package. In particular, the calculation routine and the Graphical-Unit Interface (GUI) were implemented. Before implementing the interfaces, an analysis of requirements for the correct interaction between the OU and the other simulator components was carried out. Both modules embedded in HYSYS take advantage of its complete property-package, which complements GAMS and FORTRAN in order to carry out the accurate computation of the chemical and equilibrium properties. © 2009 The Institution of Chemical Engineers.Fil: Domancich, Alejandro Omar. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Bahía Blanca. Planta Piloto de Ingeniería Química. Universidad Nacional del Sur. Planta Piloto de Ingeniería Química; Argentina. Universidad Nacional del Sur; ArgentinaFil: Perez, Virginia. Universidad Nacional del Sur; ArgentinaFil: Hoch, Patricia Monica. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Bahía Blanca. Planta Piloto de Ingeniería Química. Universidad Nacional del Sur. Planta Piloto de Ingeniería Química; Argentina. Universidad Nacional del Sur; ArgentinaFil: Brignole, Nélida Beatriz. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Bahía Blanca. Planta Piloto de Ingeniería Química. Universidad Nacional del Sur. Planta Piloto de Ingeniería Química; Argentina. Universidad Nacional del Sur; ArgentinaInstitution of Chemical Engineers2010-04info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionhttp://purl.org/coar/resource_type/c_6501info:ar-repo/semantics/articuloapplication/pdfapplication/pdfhttp://hdl.handle.net/11336/160425Domancich, Alejandro Omar; Perez, Virginia; Hoch, Patricia Monica; Brignole, Nélida Beatriz; Systematic generation of a CAPE-OPEN compliant simulation module from GAMS and FORTRAN models; Institution of Chemical Engineers; Chemical Engineering Research & Design; 88; 4; 4-2010; 421-4290263-8762CONICET DigitalCONICETenginfo:eu-repo/semantics/altIdentifier/url/https://www.sciencedirect.com/science/article/pii/S0263876209001944info:eu-repo/semantics/altIdentifier/doi/10.1016/j.cherd.2009.07.022info:eu-repo/semantics/openAccesshttps://creativecommons.org/licenses/by-nc-sa/2.5/ar/reponame:CONICET Digital (CONICET)instname:Consejo Nacional de Investigaciones Científicas y Técnicas2025-09-10T13:14:04Zoai:ri.conicet.gov.ar:11336/160425instacron:CONICETInstitucionalhttp://ri.conicet.gov.ar/Organismo científico-tecnológicoNo correspondehttp://ri.conicet.gov.ar/oai/requestdasensio@conicet.gov.ar; lcarlino@conicet.gov.arArgentinaNo correspondeNo correspondeNo correspondeopendoar:34982025-09-10 13:14:05.214CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicasfalse
dc.title.none.fl_str_mv Systematic generation of a CAPE-OPEN compliant simulation module from GAMS and FORTRAN models
title Systematic generation of a CAPE-OPEN compliant simulation module from GAMS and FORTRAN models
spellingShingle Systematic generation of a CAPE-OPEN compliant simulation module from GAMS and FORTRAN models
Domancich, Alejandro Omar
CAPE-OPEN
GAMS
HYSYS
PROCESS SIMULATION
PROCESS-MODELING COMPONENTS
COMPONENTS
title_short Systematic generation of a CAPE-OPEN compliant simulation module from GAMS and FORTRAN models
title_full Systematic generation of a CAPE-OPEN compliant simulation module from GAMS and FORTRAN models
title_fullStr Systematic generation of a CAPE-OPEN compliant simulation module from GAMS and FORTRAN models
title_full_unstemmed Systematic generation of a CAPE-OPEN compliant simulation module from GAMS and FORTRAN models
title_sort Systematic generation of a CAPE-OPEN compliant simulation module from GAMS and FORTRAN models
dc.creator.none.fl_str_mv Domancich, Alejandro Omar
Perez, Virginia
Hoch, Patricia Monica
Brignole, Nélida Beatriz
author Domancich, Alejandro Omar
author_facet Domancich, Alejandro Omar
Perez, Virginia
Hoch, Patricia Monica
Brignole, Nélida Beatriz
author_role author
author2 Perez, Virginia
Hoch, Patricia Monica
Brignole, Nélida Beatriz
author2_role author
author
author
dc.subject.none.fl_str_mv CAPE-OPEN
GAMS
HYSYS
PROCESS SIMULATION
PROCESS-MODELING COMPONENTS
COMPONENTS
topic CAPE-OPEN
GAMS
HYSYS
PROCESS SIMULATION
PROCESS-MODELING COMPONENTS
COMPONENTS
purl_subject.fl_str_mv https://purl.org/becyt/ford/2.4
https://purl.org/becyt/ford/2
dc.description.none.fl_txt_mv The adaptation of complex existing modules so that they meet the CAPE-OPEN (CO) standard is important in order to take advantage of previous work done for the simulation of processes. In this work we present the design and implementation of two different Operation-Unit (OU) modules that support the CO interface. Each resulting OU satisfies the definitions and guidelines established by the standard. The first module consists of a CO-compatible component for the steady-state simulation of a multi-bed ammonia reactor, whose original code had been written in FORTRAN. The second one, which also supports the CO interface, it is a GAMS-compatible module of a reactive distillation column. In order to develop these modules, an existing CO wizard that targets the mechanical generation of the OU Package was used. This wizard generates a Visual Basic project that contains the OU's source code and its installation package. In particular, the calculation routine and the Graphical-Unit Interface (GUI) were implemented. Before implementing the interfaces, an analysis of requirements for the correct interaction between the OU and the other simulator components was carried out. Both modules embedded in HYSYS take advantage of its complete property-package, which complements GAMS and FORTRAN in order to carry out the accurate computation of the chemical and equilibrium properties. © 2009 The Institution of Chemical Engineers.
Fil: Domancich, Alejandro Omar. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Bahía Blanca. Planta Piloto de Ingeniería Química. Universidad Nacional del Sur. Planta Piloto de Ingeniería Química; Argentina. Universidad Nacional del Sur; Argentina
Fil: Perez, Virginia. Universidad Nacional del Sur; Argentina
Fil: Hoch, Patricia Monica. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Bahía Blanca. Planta Piloto de Ingeniería Química. Universidad Nacional del Sur. Planta Piloto de Ingeniería Química; Argentina. Universidad Nacional del Sur; Argentina
Fil: Brignole, Nélida Beatriz. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Bahía Blanca. Planta Piloto de Ingeniería Química. Universidad Nacional del Sur. Planta Piloto de Ingeniería Química; Argentina. Universidad Nacional del Sur; Argentina
description The adaptation of complex existing modules so that they meet the CAPE-OPEN (CO) standard is important in order to take advantage of previous work done for the simulation of processes. In this work we present the design and implementation of two different Operation-Unit (OU) modules that support the CO interface. Each resulting OU satisfies the definitions and guidelines established by the standard. The first module consists of a CO-compatible component for the steady-state simulation of a multi-bed ammonia reactor, whose original code had been written in FORTRAN. The second one, which also supports the CO interface, it is a GAMS-compatible module of a reactive distillation column. In order to develop these modules, an existing CO wizard that targets the mechanical generation of the OU Package was used. This wizard generates a Visual Basic project that contains the OU's source code and its installation package. In particular, the calculation routine and the Graphical-Unit Interface (GUI) were implemented. Before implementing the interfaces, an analysis of requirements for the correct interaction between the OU and the other simulator components was carried out. Both modules embedded in HYSYS take advantage of its complete property-package, which complements GAMS and FORTRAN in order to carry out the accurate computation of the chemical and equilibrium properties. © 2009 The Institution of Chemical Engineers.
publishDate 2010
dc.date.none.fl_str_mv 2010-04
dc.type.none.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
http://purl.org/coar/resource_type/c_6501
info:ar-repo/semantics/articulo
format article
status_str publishedVersion
dc.identifier.none.fl_str_mv http://hdl.handle.net/11336/160425
Domancich, Alejandro Omar; Perez, Virginia; Hoch, Patricia Monica; Brignole, Nélida Beatriz; Systematic generation of a CAPE-OPEN compliant simulation module from GAMS and FORTRAN models; Institution of Chemical Engineers; Chemical Engineering Research & Design; 88; 4; 4-2010; 421-429
0263-8762
CONICET Digital
CONICET
url http://hdl.handle.net/11336/160425
identifier_str_mv Domancich, Alejandro Omar; Perez, Virginia; Hoch, Patricia Monica; Brignole, Nélida Beatriz; Systematic generation of a CAPE-OPEN compliant simulation module from GAMS and FORTRAN models; Institution of Chemical Engineers; Chemical Engineering Research & Design; 88; 4; 4-2010; 421-429
0263-8762
CONICET Digital
CONICET
dc.language.none.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv info:eu-repo/semantics/altIdentifier/url/https://www.sciencedirect.com/science/article/pii/S0263876209001944
info:eu-repo/semantics/altIdentifier/doi/10.1016/j.cherd.2009.07.022
dc.rights.none.fl_str_mv info:eu-repo/semantics/openAccess
https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
eu_rights_str_mv openAccess
rights_invalid_str_mv https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
dc.format.none.fl_str_mv application/pdf
application/pdf
dc.publisher.none.fl_str_mv Institution of Chemical Engineers
publisher.none.fl_str_mv Institution of Chemical Engineers
dc.source.none.fl_str_mv reponame:CONICET Digital (CONICET)
instname:Consejo Nacional de Investigaciones Científicas y Técnicas
reponame_str CONICET Digital (CONICET)
collection CONICET Digital (CONICET)
instname_str Consejo Nacional de Investigaciones Científicas y Técnicas
repository.name.fl_str_mv CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicas
repository.mail.fl_str_mv dasensio@conicet.gov.ar; lcarlino@conicet.gov.ar
_version_ 1842980749715701760
score 13.004268

Publicaciones similares