Effects of different relative humidities on flax fibers prior to manufacturing their composites based on the shear response
- Autores
- Moudood, Abdul; Rahman, Anisur; Öchsner, Andreas; Islam, Md Mainul; Ali, Mohammad Yeakub; Francucci, Gaston Martin
- Año de publicación
- 2020
- Idioma
- inglés
- Tipo de recurso
- artículo
- Estado
- versión publicada
- Descripción
- The moisture absorption behavior of flax fiber-reinforced epoxy composites is deliberated to be a serious issue. This property restricts their usage as outdoor engineering structures. Therefore, this study provides an investigation of moisture in flax fibers on the performance of the flax/epoxy composite materials based on their shear responses. The ±45° aligned flax fibers exposed to different relative humidities (RH) and the vacuum infusion process was used to manufacture the composite specimens. The optimum shear strength (40.25 ± 0.75 MPa) was found for the composites manufactured with 35% RH-conditioned flax fibers, but the shear modulus was reduced consistently with increasing RH values. Although shear strength was increased because of fiber swelling with increased moisture absorption rate until 35% RH environments with good microstructures, nonetheless, strength and modulus both started to decrease after this range. A very poor microstructure has been affirmed by the SEM images of the composite samples conditioned at 90% RH environments.
Fil: Moudood, Abdul. Griffith University; Australia
Fil: Rahman, Anisur. Griffith University; Australia
Fil: Öchsner, Andreas. University Of Applied Sciences. Hochschule Esslingen; Alemania
Fil: Islam, Md Mainul. University Of Southern Queensland; Australia
Fil: Ali, Mohammad Yeakub. Universiti Teknologi Brunei; Brunéi
Fil: Francucci, Gaston Martin. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; Argentina - Materia
-
Flax
Bio COmposites
Humidity
Degradation - Nivel de accesibilidad
- acceso abierto
- Condiciones de uso
- https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
- Repositorio
- Institución
- Consejo Nacional de Investigaciones Científicas y Técnicas
- OAI Identificador
- oai:ri.conicet.gov.ar:11336/141672
Ver los metadatos del registro completo
id |
CONICETDig_bfeabeaf3022decacb583b1d9db2c763 |
---|---|
oai_identifier_str |
oai:ri.conicet.gov.ar:11336/141672 |
network_acronym_str |
CONICETDig |
repository_id_str |
3498 |
network_name_str |
CONICET Digital (CONICET) |
spelling |
Effects of different relative humidities on flax fibers prior to manufacturing their composites based on the shear responseMoudood, AbdulRahman, AnisurÖchsner, AndreasIslam, Md MainulAli, Mohammad YeakubFrancucci, Gaston MartinFlaxBio COmpositesHumidityDegradationhttps://purl.org/becyt/ford/2.5https://purl.org/becyt/ford/2The moisture absorption behavior of flax fiber-reinforced epoxy composites is deliberated to be a serious issue. This property restricts their usage as outdoor engineering structures. Therefore, this study provides an investigation of moisture in flax fibers on the performance of the flax/epoxy composite materials based on their shear responses. The ±45° aligned flax fibers exposed to different relative humidities (RH) and the vacuum infusion process was used to manufacture the composite specimens. The optimum shear strength (40.25 ± 0.75 MPa) was found for the composites manufactured with 35% RH-conditioned flax fibers, but the shear modulus was reduced consistently with increasing RH values. Although shear strength was increased because of fiber swelling with increased moisture absorption rate until 35% RH environments with good microstructures, nonetheless, strength and modulus both started to decrease after this range. A very poor microstructure has been affirmed by the SEM images of the composite samples conditioned at 90% RH environments.Fil: Moudood, Abdul. Griffith University; AustraliaFil: Rahman, Anisur. Griffith University; AustraliaFil: Öchsner, Andreas. University Of Applied Sciences. Hochschule Esslingen; AlemaniaFil: Islam, Md Mainul. University Of Southern Queensland; AustraliaFil: Ali, Mohammad Yeakub. Universiti Teknologi Brunei; BrunéiFil: Francucci, Gaston Martin. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaHindawi Publishing Corporation2020-08info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionhttp://purl.org/coar/resource_type/c_6501info:ar-repo/semantics/articuloapplication/pdfapplication/pdfhttp://hdl.handle.net/11336/141672Moudood, Abdul; Rahman, Anisur; Öchsner, Andreas; Islam, Md Mainul; Ali, Mohammad Yeakub; et al.; Effects of different relative humidities on flax fibers prior to manufacturing their composites based on the shear response; Hindawi Publishing Corporation; Advances in Materials Science and Engineering; 2020; 8-2020; 1-71687-8442CONICET DigitalCONICETenginfo:eu-repo/semantics/altIdentifier/url/https://www.hindawi.com/journals/amse/2020/4785970/info:eu-repo/semantics/altIdentifier/doi/10.1155/2020/4785970info:eu-repo/semantics/openAccesshttps://creativecommons.org/licenses/by-nc-sa/2.5/ar/reponame:CONICET Digital (CONICET)instname:Consejo Nacional de Investigaciones Científicas y Técnicas2025-09-29T09:34:29Zoai:ri.conicet.gov.ar:11336/141672instacron:CONICETInstitucionalhttp://ri.conicet.gov.ar/Organismo científico-tecnológicoNo correspondehttp://ri.conicet.gov.ar/oai/requestdasensio@conicet.gov.ar; lcarlino@conicet.gov.arArgentinaNo correspondeNo correspondeNo correspondeopendoar:34982025-09-29 09:34:29.538CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicasfalse |
dc.title.none.fl_str_mv |
Effects of different relative humidities on flax fibers prior to manufacturing their composites based on the shear response |
title |
Effects of different relative humidities on flax fibers prior to manufacturing their composites based on the shear response |
spellingShingle |
Effects of different relative humidities on flax fibers prior to manufacturing their composites based on the shear response Moudood, Abdul Flax Bio COmposites Humidity Degradation |
title_short |
Effects of different relative humidities on flax fibers prior to manufacturing their composites based on the shear response |
title_full |
Effects of different relative humidities on flax fibers prior to manufacturing their composites based on the shear response |
title_fullStr |
Effects of different relative humidities on flax fibers prior to manufacturing their composites based on the shear response |
title_full_unstemmed |
Effects of different relative humidities on flax fibers prior to manufacturing their composites based on the shear response |
title_sort |
Effects of different relative humidities on flax fibers prior to manufacturing their composites based on the shear response |
dc.creator.none.fl_str_mv |
Moudood, Abdul Rahman, Anisur Öchsner, Andreas Islam, Md Mainul Ali, Mohammad Yeakub Francucci, Gaston Martin |
author |
Moudood, Abdul |
author_facet |
Moudood, Abdul Rahman, Anisur Öchsner, Andreas Islam, Md Mainul Ali, Mohammad Yeakub Francucci, Gaston Martin |
author_role |
author |
author2 |
Rahman, Anisur Öchsner, Andreas Islam, Md Mainul Ali, Mohammad Yeakub Francucci, Gaston Martin |
author2_role |
author author author author author |
dc.subject.none.fl_str_mv |
Flax Bio COmposites Humidity Degradation |
topic |
Flax Bio COmposites Humidity Degradation |
purl_subject.fl_str_mv |
https://purl.org/becyt/ford/2.5 https://purl.org/becyt/ford/2 |
dc.description.none.fl_txt_mv |
The moisture absorption behavior of flax fiber-reinforced epoxy composites is deliberated to be a serious issue. This property restricts their usage as outdoor engineering structures. Therefore, this study provides an investigation of moisture in flax fibers on the performance of the flax/epoxy composite materials based on their shear responses. The ±45° aligned flax fibers exposed to different relative humidities (RH) and the vacuum infusion process was used to manufacture the composite specimens. The optimum shear strength (40.25 ± 0.75 MPa) was found for the composites manufactured with 35% RH-conditioned flax fibers, but the shear modulus was reduced consistently with increasing RH values. Although shear strength was increased because of fiber swelling with increased moisture absorption rate until 35% RH environments with good microstructures, nonetheless, strength and modulus both started to decrease after this range. A very poor microstructure has been affirmed by the SEM images of the composite samples conditioned at 90% RH environments. Fil: Moudood, Abdul. Griffith University; Australia Fil: Rahman, Anisur. Griffith University; Australia Fil: Öchsner, Andreas. University Of Applied Sciences. Hochschule Esslingen; Alemania Fil: Islam, Md Mainul. University Of Southern Queensland; Australia Fil: Ali, Mohammad Yeakub. Universiti Teknologi Brunei; Brunéi Fil: Francucci, Gaston Martin. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; Argentina |
description |
The moisture absorption behavior of flax fiber-reinforced epoxy composites is deliberated to be a serious issue. This property restricts their usage as outdoor engineering structures. Therefore, this study provides an investigation of moisture in flax fibers on the performance of the flax/epoxy composite materials based on their shear responses. The ±45° aligned flax fibers exposed to different relative humidities (RH) and the vacuum infusion process was used to manufacture the composite specimens. The optimum shear strength (40.25 ± 0.75 MPa) was found for the composites manufactured with 35% RH-conditioned flax fibers, but the shear modulus was reduced consistently with increasing RH values. Although shear strength was increased because of fiber swelling with increased moisture absorption rate until 35% RH environments with good microstructures, nonetheless, strength and modulus both started to decrease after this range. A very poor microstructure has been affirmed by the SEM images of the composite samples conditioned at 90% RH environments. |
publishDate |
2020 |
dc.date.none.fl_str_mv |
2020-08 |
dc.type.none.fl_str_mv |
info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion http://purl.org/coar/resource_type/c_6501 info:ar-repo/semantics/articulo |
format |
article |
status_str |
publishedVersion |
dc.identifier.none.fl_str_mv |
http://hdl.handle.net/11336/141672 Moudood, Abdul; Rahman, Anisur; Öchsner, Andreas; Islam, Md Mainul; Ali, Mohammad Yeakub; et al.; Effects of different relative humidities on flax fibers prior to manufacturing their composites based on the shear response; Hindawi Publishing Corporation; Advances in Materials Science and Engineering; 2020; 8-2020; 1-7 1687-8442 CONICET Digital CONICET |
url |
http://hdl.handle.net/11336/141672 |
identifier_str_mv |
Moudood, Abdul; Rahman, Anisur; Öchsner, Andreas; Islam, Md Mainul; Ali, Mohammad Yeakub; et al.; Effects of different relative humidities on flax fibers prior to manufacturing their composites based on the shear response; Hindawi Publishing Corporation; Advances in Materials Science and Engineering; 2020; 8-2020; 1-7 1687-8442 CONICET Digital CONICET |
dc.language.none.fl_str_mv |
eng |
language |
eng |
dc.relation.none.fl_str_mv |
info:eu-repo/semantics/altIdentifier/url/https://www.hindawi.com/journals/amse/2020/4785970/ info:eu-repo/semantics/altIdentifier/doi/10.1155/2020/4785970 |
dc.rights.none.fl_str_mv |
info:eu-repo/semantics/openAccess https://creativecommons.org/licenses/by-nc-sa/2.5/ar/ |
eu_rights_str_mv |
openAccess |
rights_invalid_str_mv |
https://creativecommons.org/licenses/by-nc-sa/2.5/ar/ |
dc.format.none.fl_str_mv |
application/pdf application/pdf |
dc.publisher.none.fl_str_mv |
Hindawi Publishing Corporation |
publisher.none.fl_str_mv |
Hindawi Publishing Corporation |
dc.source.none.fl_str_mv |
reponame:CONICET Digital (CONICET) instname:Consejo Nacional de Investigaciones Científicas y Técnicas |
reponame_str |
CONICET Digital (CONICET) |
collection |
CONICET Digital (CONICET) |
instname_str |
Consejo Nacional de Investigaciones Científicas y Técnicas |
repository.name.fl_str_mv |
CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicas |
repository.mail.fl_str_mv |
dasensio@conicet.gov.ar; lcarlino@conicet.gov.ar |
_version_ |
1844613066950443008 |
score |
13.070432 |