Optimizing manufactured sand content in mortars and its influence on fresh and hardened state

Autores
Sosa, Maria Eva; Chirillano, Andrés; Villagrán Zaccardi, Yury Andrés; Zega, Claudio Javier
Año de publicación
2020
Idioma
inglés
Tipo de recurso
artículo
Estado
versión publicada
Descripción
La forma y textura de los agregados desempeña un rol predominante en las propiedades de las mezclas cementiceas. Debidos a ello algunos reglamentos limitan el contenido de agregado fino de trituración al 30% del total de agregado fino en el hormigón. Sin embargo, pocos métodos de diseño consideran la forma y textura de los agregados en el proporcionamiento de las mezclas. Este estudio presenta un método de optimización para incrementar el porcentaje de agregado fino de trituración a utilizar basado en el volumen de vacíos de los agregados y su correlación con las propiedades en estado fresco de morteros. Para ello distintas propiedades del estado fresco y endurecido fueron evaluadas a fin de un análisis integral sobre la influencia del método en el desempeño de los morteros. De los resultados obtenidos surge que es posible maximizar el contenido de agregados de trituración sin efectos perjudiciales en la resistencia a compresión.
The shape and roughness of aggregates play a predominant role in the properties of cement mixes. Due to that, some regulations limit the content of manufacture fine aggregate at 30% of the total of fine aggregate in concrete. However, few design methods consider the shape and roughness surface of aggregates in the mix proportioning. This study presents an optimization method to increase the percentage of manufactured fine aggregates to be used, based on the void volume of the aggregates and their correlation with the fresh properties of mortars. To achieve that, the characteristics of the fresh and hard state were evaluated in order to carry out a comprehensive analysis on the influence of the method on the performance of mortars. From the results emerges that it is possible to maximize the content of manufactured aggregates without detrimental effects on compressive strength.
Fil: Sosa, Maria Eva. Universidad Tecnológica Nacional. Facultad Reg.la Plata. Departamento de Ingeniería Civil; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata; Argentina
Fil: Chirillano, Andrés. Universidad Tecnológica Nacional. Facultad Reg.la Plata. Departamento de Ingeniería Civil; Argentina
Fil: Villagrán Zaccardi, Yury Andrés. Provincia de Buenos Aires. Gobernación. Comisión de Investigaciones Científicas. Área Tecnología del Hormigón; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata; Argentina. Universidad Tecnológica Nacional. Facultad Reg.la Plata. Departamento de Ingeniería Civil; Argentina
Fil: Zega, Claudio Javier. Provincia de Buenos Aires. Gobernación. Comisión de Investigaciones Científicas. Área Tecnología del Hormigón; Argentina. Universidad Tecnológica Nacional. Facultad Reg.la Plata. Departamento de Ingeniería Civil; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata; Argentina
Materia
MANUFACTURED FINE AGGREGATE
PARTICLE SIZE DISTRIBUTION
VOID VOLUME
MIXTURE PROPORTIONING
SLUMP
Nivel de accesibilidad
acceso abierto
Condiciones de uso
https://creativecommons.org/licenses/by-nc-nd/2.5/ar/
Repositorio
CONICET Digital (CONICET)
Institución
Consejo Nacional de Investigaciones Científicas y Técnicas
OAI Identificador
oai:ri.conicet.gov.ar:11336/157584

id CONICETDig_a229c633db9d291e689963f413769bbd
oai_identifier_str oai:ri.conicet.gov.ar:11336/157584
network_acronym_str CONICETDig
repository_id_str 3498
network_name_str CONICET Digital (CONICET)
spelling Optimizing manufactured sand content in mortars and its influence on fresh and hardened stateOptimización del contenido de arena de trituración en morteros y su influencia sobre el estado fresco y endurecidoSosa, Maria EvaChirillano, AndrésVillagrán Zaccardi, Yury AndrésZega, Claudio JavierMANUFACTURED FINE AGGREGATEPARTICLE SIZE DISTRIBUTIONVOID VOLUMEMIXTURE PROPORTIONINGSLUMPhttps://purl.org/becyt/ford/2.1https://purl.org/becyt/ford/2La forma y textura de los agregados desempeña un rol predominante en las propiedades de las mezclas cementiceas. Debidos a ello algunos reglamentos limitan el contenido de agregado fino de trituración al 30% del total de agregado fino en el hormigón. Sin embargo, pocos métodos de diseño consideran la forma y textura de los agregados en el proporcionamiento de las mezclas. Este estudio presenta un método de optimización para incrementar el porcentaje de agregado fino de trituración a utilizar basado en el volumen de vacíos de los agregados y su correlación con las propiedades en estado fresco de morteros. Para ello distintas propiedades del estado fresco y endurecido fueron evaluadas a fin de un análisis integral sobre la influencia del método en el desempeño de los morteros. De los resultados obtenidos surge que es posible maximizar el contenido de agregados de trituración sin efectos perjudiciales en la resistencia a compresión.The shape and roughness of aggregates play a predominant role in the properties of cement mixes. Due to that, some regulations limit the content of manufacture fine aggregate at 30% of the total of fine aggregate in concrete. However, few design methods consider the shape and roughness surface of aggregates in the mix proportioning. This study presents an optimization method to increase the percentage of manufactured fine aggregates to be used, based on the void volume of the aggregates and their correlation with the fresh properties of mortars. To achieve that, the characteristics of the fresh and hard state were evaluated in order to carry out a comprehensive analysis on the influence of the method on the performance of mortars. From the results emerges that it is possible to maximize the content of manufactured aggregates without detrimental effects on compressive strength.Fil: Sosa, Maria Eva. Universidad Tecnológica Nacional. Facultad Reg.la Plata. Departamento de Ingeniería Civil; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata; ArgentinaFil: Chirillano, Andrés. Universidad Tecnológica Nacional. Facultad Reg.la Plata. Departamento de Ingeniería Civil; ArgentinaFil: Villagrán Zaccardi, Yury Andrés. Provincia de Buenos Aires. Gobernación. Comisión de Investigaciones Científicas. Área Tecnología del Hormigón; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata; Argentina. Universidad Tecnológica Nacional. Facultad Reg.la Plata. Departamento de Ingeniería Civil; ArgentinaFil: Zega, Claudio Javier. Provincia de Buenos Aires. Gobernación. Comisión de Investigaciones Científicas. Área Tecnología del Hormigón; Argentina. Universidad Tecnológica Nacional. Facultad Reg.la Plata. Departamento de Ingeniería Civil; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata; ArgentinaUniversidad Nacional de Colombia2020-07info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionhttp://purl.org/coar/resource_type/c_6501info:ar-repo/semantics/articuloapplication/pdfapplication/pdfhttp://hdl.handle.net/11336/157584Sosa, Maria Eva; Chirillano, Andrés; Villagrán Zaccardi, Yury Andrés; Zega, Claudio Javier; Optimizing manufactured sand content in mortars and its influence on fresh and hardened state; Universidad Nacional de Colombia; Dyna; 87; 214; 7-2020; 196-2030012-7353CONICET DigitalCONICETenginfo:eu-repo/semantics/altIdentifier/doi/10.15446/dyna.v87n214.84553info:eu-repo/semantics/altIdentifier/url/https://revistas.unal.edu.co/index.php/dyna/article/view/84553info:eu-repo/semantics/openAccesshttps://creativecommons.org/licenses/by-nc-nd/2.5/ar/reponame:CONICET Digital (CONICET)instname:Consejo Nacional de Investigaciones Científicas y Técnicas2025-09-29T10:09:51Zoai:ri.conicet.gov.ar:11336/157584instacron:CONICETInstitucionalhttp://ri.conicet.gov.ar/Organismo científico-tecnológicoNo correspondehttp://ri.conicet.gov.ar/oai/requestdasensio@conicet.gov.ar; lcarlino@conicet.gov.arArgentinaNo correspondeNo correspondeNo correspondeopendoar:34982025-09-29 10:09:51.735CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicasfalse
dc.title.none.fl_str_mv Optimizing manufactured sand content in mortars and its influence on fresh and hardened state
Optimización del contenido de arena de trituración en morteros y su influencia sobre el estado fresco y endurecido
title Optimizing manufactured sand content in mortars and its influence on fresh and hardened state
spellingShingle Optimizing manufactured sand content in mortars and its influence on fresh and hardened state
Sosa, Maria Eva
MANUFACTURED FINE AGGREGATE
PARTICLE SIZE DISTRIBUTION
VOID VOLUME
MIXTURE PROPORTIONING
SLUMP
title_short Optimizing manufactured sand content in mortars and its influence on fresh and hardened state
title_full Optimizing manufactured sand content in mortars and its influence on fresh and hardened state
title_fullStr Optimizing manufactured sand content in mortars and its influence on fresh and hardened state
title_full_unstemmed Optimizing manufactured sand content in mortars and its influence on fresh and hardened state
title_sort Optimizing manufactured sand content in mortars and its influence on fresh and hardened state
dc.creator.none.fl_str_mv Sosa, Maria Eva
Chirillano, Andrés
Villagrán Zaccardi, Yury Andrés
Zega, Claudio Javier
author Sosa, Maria Eva
author_facet Sosa, Maria Eva
Chirillano, Andrés
Villagrán Zaccardi, Yury Andrés
Zega, Claudio Javier
author_role author
author2 Chirillano, Andrés
Villagrán Zaccardi, Yury Andrés
Zega, Claudio Javier
author2_role author
author
author
dc.subject.none.fl_str_mv MANUFACTURED FINE AGGREGATE
PARTICLE SIZE DISTRIBUTION
VOID VOLUME
MIXTURE PROPORTIONING
SLUMP
topic MANUFACTURED FINE AGGREGATE
PARTICLE SIZE DISTRIBUTION
VOID VOLUME
MIXTURE PROPORTIONING
SLUMP
purl_subject.fl_str_mv https://purl.org/becyt/ford/2.1
https://purl.org/becyt/ford/2
dc.description.none.fl_txt_mv La forma y textura de los agregados desempeña un rol predominante en las propiedades de las mezclas cementiceas. Debidos a ello algunos reglamentos limitan el contenido de agregado fino de trituración al 30% del total de agregado fino en el hormigón. Sin embargo, pocos métodos de diseño consideran la forma y textura de los agregados en el proporcionamiento de las mezclas. Este estudio presenta un método de optimización para incrementar el porcentaje de agregado fino de trituración a utilizar basado en el volumen de vacíos de los agregados y su correlación con las propiedades en estado fresco de morteros. Para ello distintas propiedades del estado fresco y endurecido fueron evaluadas a fin de un análisis integral sobre la influencia del método en el desempeño de los morteros. De los resultados obtenidos surge que es posible maximizar el contenido de agregados de trituración sin efectos perjudiciales en la resistencia a compresión.
The shape and roughness of aggregates play a predominant role in the properties of cement mixes. Due to that, some regulations limit the content of manufacture fine aggregate at 30% of the total of fine aggregate in concrete. However, few design methods consider the shape and roughness surface of aggregates in the mix proportioning. This study presents an optimization method to increase the percentage of manufactured fine aggregates to be used, based on the void volume of the aggregates and their correlation with the fresh properties of mortars. To achieve that, the characteristics of the fresh and hard state were evaluated in order to carry out a comprehensive analysis on the influence of the method on the performance of mortars. From the results emerges that it is possible to maximize the content of manufactured aggregates without detrimental effects on compressive strength.
Fil: Sosa, Maria Eva. Universidad Tecnológica Nacional. Facultad Reg.la Plata. Departamento de Ingeniería Civil; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata; Argentina
Fil: Chirillano, Andrés. Universidad Tecnológica Nacional. Facultad Reg.la Plata. Departamento de Ingeniería Civil; Argentina
Fil: Villagrán Zaccardi, Yury Andrés. Provincia de Buenos Aires. Gobernación. Comisión de Investigaciones Científicas. Área Tecnología del Hormigón; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata; Argentina. Universidad Tecnológica Nacional. Facultad Reg.la Plata. Departamento de Ingeniería Civil; Argentina
Fil: Zega, Claudio Javier. Provincia de Buenos Aires. Gobernación. Comisión de Investigaciones Científicas. Área Tecnología del Hormigón; Argentina. Universidad Tecnológica Nacional. Facultad Reg.la Plata. Departamento de Ingeniería Civil; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata; Argentina
description La forma y textura de los agregados desempeña un rol predominante en las propiedades de las mezclas cementiceas. Debidos a ello algunos reglamentos limitan el contenido de agregado fino de trituración al 30% del total de agregado fino en el hormigón. Sin embargo, pocos métodos de diseño consideran la forma y textura de los agregados en el proporcionamiento de las mezclas. Este estudio presenta un método de optimización para incrementar el porcentaje de agregado fino de trituración a utilizar basado en el volumen de vacíos de los agregados y su correlación con las propiedades en estado fresco de morteros. Para ello distintas propiedades del estado fresco y endurecido fueron evaluadas a fin de un análisis integral sobre la influencia del método en el desempeño de los morteros. De los resultados obtenidos surge que es posible maximizar el contenido de agregados de trituración sin efectos perjudiciales en la resistencia a compresión.
publishDate 2020
dc.date.none.fl_str_mv 2020-07
dc.type.none.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
http://purl.org/coar/resource_type/c_6501
info:ar-repo/semantics/articulo
format article
status_str publishedVersion
dc.identifier.none.fl_str_mv http://hdl.handle.net/11336/157584
Sosa, Maria Eva; Chirillano, Andrés; Villagrán Zaccardi, Yury Andrés; Zega, Claudio Javier; Optimizing manufactured sand content in mortars and its influence on fresh and hardened state; Universidad Nacional de Colombia; Dyna; 87; 214; 7-2020; 196-203
0012-7353
CONICET Digital
CONICET
url http://hdl.handle.net/11336/157584
identifier_str_mv Sosa, Maria Eva; Chirillano, Andrés; Villagrán Zaccardi, Yury Andrés; Zega, Claudio Javier; Optimizing manufactured sand content in mortars and its influence on fresh and hardened state; Universidad Nacional de Colombia; Dyna; 87; 214; 7-2020; 196-203
0012-7353
CONICET Digital
CONICET
dc.language.none.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv info:eu-repo/semantics/altIdentifier/doi/10.15446/dyna.v87n214.84553
info:eu-repo/semantics/altIdentifier/url/https://revistas.unal.edu.co/index.php/dyna/article/view/84553
dc.rights.none.fl_str_mv info:eu-repo/semantics/openAccess
https://creativecommons.org/licenses/by-nc-nd/2.5/ar/
eu_rights_str_mv openAccess
rights_invalid_str_mv https://creativecommons.org/licenses/by-nc-nd/2.5/ar/
dc.format.none.fl_str_mv application/pdf
application/pdf
dc.publisher.none.fl_str_mv Universidad Nacional de Colombia
publisher.none.fl_str_mv Universidad Nacional de Colombia
dc.source.none.fl_str_mv reponame:CONICET Digital (CONICET)
instname:Consejo Nacional de Investigaciones Científicas y Técnicas
reponame_str CONICET Digital (CONICET)
collection CONICET Digital (CONICET)
instname_str Consejo Nacional de Investigaciones Científicas y Técnicas
repository.name.fl_str_mv CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicas
repository.mail.fl_str_mv dasensio@conicet.gov.ar; lcarlino@conicet.gov.ar
_version_ 1844613981708222464
score 13.070432