On the use of the Prandtl mixing length model in the cutting torch modeling

Autores
Mancinelli, Beatriz Rosa; Minotti, Fernando Oscar; Kelly, Hector Juan
Año de publicación
2011
Idioma
inglés
Tipo de recurso
artículo
Estado
versión publicada
Descripción
The Prandtl mixing length model has been used to take into account the turbulent effects in a 30 A high-energy density cutting torch model. In particular, the model requires the introduction of only one adjustable coefficient c corresponding to the length of action of the turbulence. It is shown that the c value has little effect on the plasma temperature profiles outside the nozzle (the differences being less than 10 %), but severely affects the plasma velocity distribution, with differences reaching about 100 % at the middle of the nozzle-anode gap. Within the experimental uncertainties it was also found that the value c = 0.08 allows to reproduce both, the experimental data of velocity and temperature.
Fil: Mancinelli, Beatriz Rosa. Universidad Tecnológica Nacional. Facultad Reg.venado Tuerto. Departamento de Ing.electromecanica. Laboratorio de Descargas Eléctricas; Argentina
Fil: Minotti, Fernando Oscar. Consejo Nacional de Investigaciones Científicas y Técnicas. Universidad de Buenos Aires; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de Física del Plasma. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Física del Plasma; Argentina
Fil: Kelly, Hector Juan. Consejo Nacional de Investigaciones Científicas y Técnicas. Universidad de Buenos Aires; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de Física del Plasma. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Física del Plasma; Argentina
Materia
Plasma
Antorcha
Turbulencia
Nivel de accesibilidad
acceso abierto
Condiciones de uso
https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
Repositorio
CONICET Digital (CONICET)
Institución
Consejo Nacional de Investigaciones Científicas y Técnicas
OAI Identificador
oai:ri.conicet.gov.ar:11336/61467
Acceder
id CONICETDig_7a93cb74700dff348f97e355b4d5006e
oai_identifier_str oai:ri.conicet.gov.ar:11336/61467
network_acronym_str CONICETDig
repository_id_str 3498
network_name_str CONICET Digital (CONICET)
spelling On the use of the Prandtl mixing length model in the cutting torch modelingMancinelli, Beatriz RosaMinotti, Fernando OscarKelly, Hector JuanPlasmaAntorchaTurbulenciahttps://purl.org/becyt/ford/1.3https://purl.org/becyt/ford/1The Prandtl mixing length model has been used to take into account the turbulent effects in a 30 A high-energy density cutting torch model. In particular, the model requires the introduction of only one adjustable coefficient c corresponding to the length of action of the turbulence. It is shown that the c value has little effect on the plasma temperature profiles outside the nozzle (the differences being less than 10 %), but severely affects the plasma velocity distribution, with differences reaching about 100 % at the middle of the nozzle-anode gap. Within the experimental uncertainties it was also found that the value c = 0.08 allows to reproduce both, the experimental data of velocity and temperature.Fil: Mancinelli, Beatriz Rosa. Universidad Tecnológica Nacional. Facultad Reg.venado Tuerto. Departamento de Ing.electromecanica. Laboratorio de Descargas Eléctricas; ArgentinaFil: Minotti, Fernando Oscar. Consejo Nacional de Investigaciones Científicas y Técnicas. Universidad de Buenos Aires; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de Física del Plasma. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Física del Plasma; ArgentinaFil: Kelly, Hector Juan. Consejo Nacional de Investigaciones Científicas y Técnicas. Universidad de Buenos Aires; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de Física del Plasma. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Física del Plasma; ArgentinaInstitute of Physics Publishing2011-05info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionhttp://purl.org/coar/resource_type/c_6501info:ar-repo/semantics/articuloapplication/pdfapplication/pdfhttp://hdl.handle.net/11336/61467Mancinelli, Beatriz Rosa; Minotti, Fernando Oscar; Kelly, Hector Juan; On the use of the Prandtl mixing length model in the cutting torch modeling; Institute of Physics Publishing; Journal of Physics: Conference Series; 296; 1; 5-2011; 12025-120321742-6596CONICET DigitalCONICETenginfo:eu-repo/semantics/altIdentifier/url/http://iopscience.iop.org/1742-6596/296/1info:eu-repo/semantics/altIdentifier/doi/10.1088/1742-6596/296/1/012025info:eu-repo/semantics/openAccesshttps://creativecommons.org/licenses/by-nc-sa/2.5/ar/reponame:CONICET Digital (CONICET)instname:Consejo Nacional de Investigaciones Científicas y Técnicas2025-09-29T09:32:44Zoai:ri.conicet.gov.ar:11336/61467instacron:CONICETInstitucionalhttp://ri.conicet.gov.ar/Organismo científico-tecnológicoNo correspondehttp://ri.conicet.gov.ar/oai/requestdasensio@conicet.gov.ar; lcarlino@conicet.gov.arArgentinaNo correspondeNo correspondeNo correspondeopendoar:34982025-09-29 09:32:45.173CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicasfalse
dc.title.none.fl_str_mv On the use of the Prandtl mixing length model in the cutting torch modeling
title On the use of the Prandtl mixing length model in the cutting torch modeling
spellingShingle On the use of the Prandtl mixing length model in the cutting torch modeling
Mancinelli, Beatriz Rosa
Plasma
Antorcha
Turbulencia
title_short On the use of the Prandtl mixing length model in the cutting torch modeling
title_full On the use of the Prandtl mixing length model in the cutting torch modeling
title_fullStr On the use of the Prandtl mixing length model in the cutting torch modeling
title_full_unstemmed On the use of the Prandtl mixing length model in the cutting torch modeling
title_sort On the use of the Prandtl mixing length model in the cutting torch modeling
dc.creator.none.fl_str_mv Mancinelli, Beatriz Rosa
Minotti, Fernando Oscar
Kelly, Hector Juan
author Mancinelli, Beatriz Rosa
author_facet Mancinelli, Beatriz Rosa
Minotti, Fernando Oscar
Kelly, Hector Juan
author_role author
author2 Minotti, Fernando Oscar
Kelly, Hector Juan
author2_role author
author
dc.subject.none.fl_str_mv Plasma
Antorcha
Turbulencia
topic Plasma
Antorcha
Turbulencia
purl_subject.fl_str_mv https://purl.org/becyt/ford/1.3
https://purl.org/becyt/ford/1
dc.description.none.fl_txt_mv The Prandtl mixing length model has been used to take into account the turbulent effects in a 30 A high-energy density cutting torch model. In particular, the model requires the introduction of only one adjustable coefficient c corresponding to the length of action of the turbulence. It is shown that the c value has little effect on the plasma temperature profiles outside the nozzle (the differences being less than 10 %), but severely affects the plasma velocity distribution, with differences reaching about 100 % at the middle of the nozzle-anode gap. Within the experimental uncertainties it was also found that the value c = 0.08 allows to reproduce both, the experimental data of velocity and temperature.
Fil: Mancinelli, Beatriz Rosa. Universidad Tecnológica Nacional. Facultad Reg.venado Tuerto. Departamento de Ing.electromecanica. Laboratorio de Descargas Eléctricas; Argentina
Fil: Minotti, Fernando Oscar. Consejo Nacional de Investigaciones Científicas y Técnicas. Universidad de Buenos Aires; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de Física del Plasma. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Física del Plasma; Argentina
Fil: Kelly, Hector Juan. Consejo Nacional de Investigaciones Científicas y Técnicas. Universidad de Buenos Aires; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de Física del Plasma. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Física del Plasma; Argentina
description The Prandtl mixing length model has been used to take into account the turbulent effects in a 30 A high-energy density cutting torch model. In particular, the model requires the introduction of only one adjustable coefficient c corresponding to the length of action of the turbulence. It is shown that the c value has little effect on the plasma temperature profiles outside the nozzle (the differences being less than 10 %), but severely affects the plasma velocity distribution, with differences reaching about 100 % at the middle of the nozzle-anode gap. Within the experimental uncertainties it was also found that the value c = 0.08 allows to reproduce both, the experimental data of velocity and temperature.
publishDate 2011
dc.date.none.fl_str_mv 2011-05
dc.type.none.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
http://purl.org/coar/resource_type/c_6501
info:ar-repo/semantics/articulo
format article
status_str publishedVersion
dc.identifier.none.fl_str_mv http://hdl.handle.net/11336/61467
Mancinelli, Beatriz Rosa; Minotti, Fernando Oscar; Kelly, Hector Juan; On the use of the Prandtl mixing length model in the cutting torch modeling; Institute of Physics Publishing; Journal of Physics: Conference Series; 296; 1; 5-2011; 12025-12032
1742-6596
CONICET Digital
CONICET
url http://hdl.handle.net/11336/61467
identifier_str_mv Mancinelli, Beatriz Rosa; Minotti, Fernando Oscar; Kelly, Hector Juan; On the use of the Prandtl mixing length model in the cutting torch modeling; Institute of Physics Publishing; Journal of Physics: Conference Series; 296; 1; 5-2011; 12025-12032
1742-6596
CONICET Digital
CONICET
dc.language.none.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv info:eu-repo/semantics/altIdentifier/url/http://iopscience.iop.org/1742-6596/296/1
info:eu-repo/semantics/altIdentifier/doi/10.1088/1742-6596/296/1/012025
dc.rights.none.fl_str_mv info:eu-repo/semantics/openAccess
https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
eu_rights_str_mv openAccess
rights_invalid_str_mv https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
dc.format.none.fl_str_mv application/pdf
application/pdf
dc.publisher.none.fl_str_mv Institute of Physics Publishing
publisher.none.fl_str_mv Institute of Physics Publishing
dc.source.none.fl_str_mv reponame:CONICET Digital (CONICET)
instname:Consejo Nacional de Investigaciones Científicas y Técnicas
reponame_str CONICET Digital (CONICET)
collection CONICET Digital (CONICET)
instname_str Consejo Nacional de Investigaciones Científicas y Técnicas
repository.name.fl_str_mv CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicas
repository.mail.fl_str_mv dasensio@conicet.gov.ar; lcarlino@conicet.gov.ar
_version_ 1844613001103015936
score 13.070432

Publicaciones similares