Numerical modeling of internal heating curing of glass reinforced epoxy pipes

Autores
Flores, Hugo; Fasce, Laura Alejandra; Riccardi, Carmen Cristina; Ayude, María Alejandra
Año de publicación
2015
Idioma
inglés
Tipo de recurso
artículo
Estado
versión publicada
Descripción
A dynamic one-dimensional model is developed to simulate the novel internal heating curing process in the manufacturing of glass reinforced epoxy pipes by filament winding. The model combines the energy balance with a mechanistic kinetic approach and it is experimentally validated using industrial plant data. The efficiency of a specific curing cycle at different operating conditions is analyzed. In particular, the influence of ambient temperature, initial mandrel temperature, glass fiber content, initiator concentration and pipe wall thickness on temperature, and degree of cure profiles within the pipe wall thickness is discussed. This study attempts to dispel current industrial myths and to propose practical strategies to improve the internal heating curing process.
Fil: Flores, Hugo. Laboratorio Tubhier S.A.; Argentina
Fil: Fasce, Laura Alejandra. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Mar del Plata. Instituto de Investigación En Ciencia y Tecnología de Materiales (i); Argentina. Universidad Nacional de Mar del Plata. Facultad de Ingeniería; Argentina
Fil: Riccardi, Carmen Cristina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Mar del Plata. Instituto de Investigación En Ciencia y Tecnología de Materiales (i); Argentina. Universidad Nacional de Mar del Plata. Facultad de Ingeniería; Argentina
Fil: Ayude, María Alejandra. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Mar del Plata. Instituto de Investigación En Ciencia y Tecnología de Materiales (i); Argentina. Universidad Nacional de Mar del Plata. Facultad de Ingeniería; Argentina
Materia
Internal Heating Curing Process
Gre Pipes
Numerical Modeling
Mechanistic Kinetic Model
Nivel de accesibilidad
acceso abierto
Condiciones de uso
https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
Repositorio
CONICET Digital (CONICET)
Institución
Consejo Nacional de Investigaciones Científicas y Técnicas
OAI Identificador
oai:ri.conicet.gov.ar:11336/10095
Acceder
id CONICETDig_65122c30e72ac3eae4366da69627aae7
oai_identifier_str oai:ri.conicet.gov.ar:11336/10095
network_acronym_str CONICETDig
repository_id_str 3498
network_name_str CONICET Digital (CONICET)
spelling Numerical modeling of internal heating curing of glass reinforced epoxy pipesFlores, HugoFasce, Laura AlejandraRiccardi, Carmen CristinaAyude, María AlejandraInternal Heating Curing ProcessGre PipesNumerical ModelingMechanistic Kinetic Modelhttps://purl.org/becyt/ford/2.4https://purl.org/becyt/ford/2https://purl.org/becyt/ford/1.4https://purl.org/becyt/ford/1A dynamic one-dimensional model is developed to simulate the novel internal heating curing process in the manufacturing of glass reinforced epoxy pipes by filament winding. The model combines the energy balance with a mechanistic kinetic approach and it is experimentally validated using industrial plant data. The efficiency of a specific curing cycle at different operating conditions is analyzed. In particular, the influence of ambient temperature, initial mandrel temperature, glass fiber content, initiator concentration and pipe wall thickness on temperature, and degree of cure profiles within the pipe wall thickness is discussed. This study attempts to dispel current industrial myths and to propose practical strategies to improve the internal heating curing process.Fil: Flores, Hugo. Laboratorio Tubhier S.A.; ArgentinaFil: Fasce, Laura Alejandra. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Mar del Plata. Instituto de Investigación En Ciencia y Tecnología de Materiales (i); Argentina. Universidad Nacional de Mar del Plata. Facultad de Ingeniería; ArgentinaFil: Riccardi, Carmen Cristina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Mar del Plata. Instituto de Investigación En Ciencia y Tecnología de Materiales (i); Argentina. Universidad Nacional de Mar del Plata. Facultad de Ingeniería; ArgentinaFil: Ayude, María Alejandra. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Mar del Plata. Instituto de Investigación En Ciencia y Tecnología de Materiales (i); Argentina. Universidad Nacional de Mar del Plata. Facultad de Ingeniería; ArgentinaJohn Wiley & Sons Inc2015-11-07info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionhttp://purl.org/coar/resource_type/c_6501info:ar-repo/semantics/articuloapplication/pdfapplication/pdfhttp://hdl.handle.net/11336/10095Flores, Hugo; Fasce, Laura Alejandra; Riccardi, Carmen Cristina; Ayude, María Alejandra; Numerical modeling of internal heating curing of glass reinforced epoxy pipes; John Wiley & Sons Inc; Polymer Engineering and Science; 55; 11; 7-11-2015; 2626-26350032-3888enginfo:eu-repo/semantics/altIdentifier/url/http://onlinelibrary.wiley.com/doi/10.1002/pen.24155/abstractinfo:eu-repo/semantics/altIdentifier/doi/10.1002/pen.24155info:eu-repo/semantics/openAccesshttps://creativecommons.org/licenses/by-nc-sa/2.5/ar/reponame:CONICET Digital (CONICET)instname:Consejo Nacional de Investigaciones Científicas y Técnicas2025-09-03T09:48:39Zoai:ri.conicet.gov.ar:11336/10095instacron:CONICETInstitucionalhttp://ri.conicet.gov.ar/Organismo científico-tecnológicoNo correspondehttp://ri.conicet.gov.ar/oai/requestdasensio@conicet.gov.ar; lcarlino@conicet.gov.arArgentinaNo correspondeNo correspondeNo correspondeopendoar:34982025-09-03 09:48:40.018CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicasfalse
dc.title.none.fl_str_mv Numerical modeling of internal heating curing of glass reinforced epoxy pipes
title Numerical modeling of internal heating curing of glass reinforced epoxy pipes
spellingShingle Numerical modeling of internal heating curing of glass reinforced epoxy pipes
Flores, Hugo
Internal Heating Curing Process
Gre Pipes
Numerical Modeling
Mechanistic Kinetic Model
title_short Numerical modeling of internal heating curing of glass reinforced epoxy pipes
title_full Numerical modeling of internal heating curing of glass reinforced epoxy pipes
title_fullStr Numerical modeling of internal heating curing of glass reinforced epoxy pipes
title_full_unstemmed Numerical modeling of internal heating curing of glass reinforced epoxy pipes
title_sort Numerical modeling of internal heating curing of glass reinforced epoxy pipes
dc.creator.none.fl_str_mv Flores, Hugo
Fasce, Laura Alejandra
Riccardi, Carmen Cristina
Ayude, María Alejandra
author Flores, Hugo
author_facet Flores, Hugo
Fasce, Laura Alejandra
Riccardi, Carmen Cristina
Ayude, María Alejandra
author_role author
author2 Fasce, Laura Alejandra
Riccardi, Carmen Cristina
Ayude, María Alejandra
author2_role author
author
author
dc.subject.none.fl_str_mv Internal Heating Curing Process
Gre Pipes
Numerical Modeling
Mechanistic Kinetic Model
topic Internal Heating Curing Process
Gre Pipes
Numerical Modeling
Mechanistic Kinetic Model
purl_subject.fl_str_mv https://purl.org/becyt/ford/2.4
https://purl.org/becyt/ford/2
https://purl.org/becyt/ford/1.4
https://purl.org/becyt/ford/1
dc.description.none.fl_txt_mv A dynamic one-dimensional model is developed to simulate the novel internal heating curing process in the manufacturing of glass reinforced epoxy pipes by filament winding. The model combines the energy balance with a mechanistic kinetic approach and it is experimentally validated using industrial plant data. The efficiency of a specific curing cycle at different operating conditions is analyzed. In particular, the influence of ambient temperature, initial mandrel temperature, glass fiber content, initiator concentration and pipe wall thickness on temperature, and degree of cure profiles within the pipe wall thickness is discussed. This study attempts to dispel current industrial myths and to propose practical strategies to improve the internal heating curing process.
Fil: Flores, Hugo. Laboratorio Tubhier S.A.; Argentina
Fil: Fasce, Laura Alejandra. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Mar del Plata. Instituto de Investigación En Ciencia y Tecnología de Materiales (i); Argentina. Universidad Nacional de Mar del Plata. Facultad de Ingeniería; Argentina
Fil: Riccardi, Carmen Cristina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Mar del Plata. Instituto de Investigación En Ciencia y Tecnología de Materiales (i); Argentina. Universidad Nacional de Mar del Plata. Facultad de Ingeniería; Argentina
Fil: Ayude, María Alejandra. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Mar del Plata. Instituto de Investigación En Ciencia y Tecnología de Materiales (i); Argentina. Universidad Nacional de Mar del Plata. Facultad de Ingeniería; Argentina
description A dynamic one-dimensional model is developed to simulate the novel internal heating curing process in the manufacturing of glass reinforced epoxy pipes by filament winding. The model combines the energy balance with a mechanistic kinetic approach and it is experimentally validated using industrial plant data. The efficiency of a specific curing cycle at different operating conditions is analyzed. In particular, the influence of ambient temperature, initial mandrel temperature, glass fiber content, initiator concentration and pipe wall thickness on temperature, and degree of cure profiles within the pipe wall thickness is discussed. This study attempts to dispel current industrial myths and to propose practical strategies to improve the internal heating curing process.
publishDate 2015
dc.date.none.fl_str_mv 2015-11-07
dc.type.none.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
http://purl.org/coar/resource_type/c_6501
info:ar-repo/semantics/articulo
format article
status_str publishedVersion
dc.identifier.none.fl_str_mv http://hdl.handle.net/11336/10095
Flores, Hugo; Fasce, Laura Alejandra; Riccardi, Carmen Cristina; Ayude, María Alejandra; Numerical modeling of internal heating curing of glass reinforced epoxy pipes; John Wiley & Sons Inc; Polymer Engineering and Science; 55; 11; 7-11-2015; 2626-2635
0032-3888
url http://hdl.handle.net/11336/10095
identifier_str_mv Flores, Hugo; Fasce, Laura Alejandra; Riccardi, Carmen Cristina; Ayude, María Alejandra; Numerical modeling of internal heating curing of glass reinforced epoxy pipes; John Wiley & Sons Inc; Polymer Engineering and Science; 55; 11; 7-11-2015; 2626-2635
0032-3888
dc.language.none.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv info:eu-repo/semantics/altIdentifier/url/http://onlinelibrary.wiley.com/doi/10.1002/pen.24155/abstract
info:eu-repo/semantics/altIdentifier/doi/10.1002/pen.24155
dc.rights.none.fl_str_mv info:eu-repo/semantics/openAccess
https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
eu_rights_str_mv openAccess
rights_invalid_str_mv https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
dc.format.none.fl_str_mv application/pdf
application/pdf
dc.publisher.none.fl_str_mv John Wiley & Sons Inc
publisher.none.fl_str_mv John Wiley & Sons Inc
dc.source.none.fl_str_mv reponame:CONICET Digital (CONICET)
instname:Consejo Nacional de Investigaciones Científicas y Técnicas
reponame_str CONICET Digital (CONICET)
collection CONICET Digital (CONICET)
instname_str Consejo Nacional de Investigaciones Científicas y Técnicas
repository.name.fl_str_mv CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicas
repository.mail.fl_str_mv dasensio@conicet.gov.ar; lcarlino@conicet.gov.ar
_version_ 1842268933612109824
score 13.13397

Publicaciones similares