Analysis of the cathode side of a PEMFC varying design parameters to optimize current distribution and power density
- Autores
- Falaguerra, Tomas; Muñoz, P.; Correa, G.
- Año de publicación
- 2021
- Idioma
- inglés
- Tipo de recurso
- artículo
- Estado
- versión publicada
- Descripción
- The amount and distribution over the active area of current density produced by the stack is a key aspect of a fuel cell performance. The performance of a proton exchange membrane fuel cell (PEMFC) is affected by many factors, including the operating conditions, flow field and manifold design, and membrane performance. In the present study, a 3D multiphysics model of a PEMFC half-cell focused in the cathode side is developed. Statistical analysis tools are proposed to quantitatively evaluate the current density distribution on the active area of the electrode in order to guarantee a proper distribution while maintaining power density. The analysis was done choosing four design parameters at three different levels on which a fractional factorial experimental design provided by the Taguchi method was applied. Finally the 0.65 V working potential, that guarantees a good power generation and its adequate density current distribution on the active area of the cell, is selected. The best conditions were obtained with geometries of parallel channels, maximum gas diffusion layer porosity, maximum inlet air velocity and minimum vapor fraction, this combination improves 2.31 times the power generated in the worst case analyzed.
Fil: Falaguerra, Tomas. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro de Investigaciones y Transferencia de Catamarca. Universidad Nacional de Catamarca. Centro de Investigaciones y Transferencia de Catamarca; Argentina
Fil: Muñoz, P.. Universidad Nacional de Catamarca; Argentina
Fil: Correa, G.. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro de Investigaciones y Transferencia de Catamarca. Universidad Nacional de Catamarca. Centro de Investigaciones y Transferencia de Catamarca; Argentina - Materia
-
CATHODE PEMFC MODEL
CURRENT DISTRIBUTION
OPTIMIZATION
STATISTICAL TOOLS
TAGUCHI - Nivel de accesibilidad
- acceso abierto
- Condiciones de uso
- https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
- Repositorio
- Institución
- Consejo Nacional de Investigaciones Científicas y Técnicas
- OAI Identificador
- oai:ri.conicet.gov.ar:11336/137488
Ver los metadatos del registro completo
id |
CONICETDig_1da228cd11e6d15679d5a1540b8cc546 |
---|---|
oai_identifier_str |
oai:ri.conicet.gov.ar:11336/137488 |
network_acronym_str |
CONICETDig |
repository_id_str |
3498 |
network_name_str |
CONICET Digital (CONICET) |
spelling |
Analysis of the cathode side of a PEMFC varying design parameters to optimize current distribution and power densityFalaguerra, TomasMuñoz, P.Correa, G.CATHODE PEMFC MODELCURRENT DISTRIBUTIONOPTIMIZATIONSTATISTICAL TOOLSTAGUCHIhttps://purl.org/becyt/ford/2.4https://purl.org/becyt/ford/2The amount and distribution over the active area of current density produced by the stack is a key aspect of a fuel cell performance. The performance of a proton exchange membrane fuel cell (PEMFC) is affected by many factors, including the operating conditions, flow field and manifold design, and membrane performance. In the present study, a 3D multiphysics model of a PEMFC half-cell focused in the cathode side is developed. Statistical analysis tools are proposed to quantitatively evaluate the current density distribution on the active area of the electrode in order to guarantee a proper distribution while maintaining power density. The analysis was done choosing four design parameters at three different levels on which a fractional factorial experimental design provided by the Taguchi method was applied. Finally the 0.65 V working potential, that guarantees a good power generation and its adequate density current distribution on the active area of the cell, is selected. The best conditions were obtained with geometries of parallel channels, maximum gas diffusion layer porosity, maximum inlet air velocity and minimum vapor fraction, this combination improves 2.31 times the power generated in the worst case analyzed.Fil: Falaguerra, Tomas. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro de Investigaciones y Transferencia de Catamarca. Universidad Nacional de Catamarca. Centro de Investigaciones y Transferencia de Catamarca; ArgentinaFil: Muñoz, P.. Universidad Nacional de Catamarca; ArgentinaFil: Correa, G.. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro de Investigaciones y Transferencia de Catamarca. Universidad Nacional de Catamarca. Centro de Investigaciones y Transferencia de Catamarca; ArgentinaElsevier Science SA2021-01info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionhttp://purl.org/coar/resource_type/c_6501info:ar-repo/semantics/articuloapplication/pdfapplication/pdfapplication/pdfhttp://hdl.handle.net/11336/137488Falaguerra, Tomas; Muñoz, P.; Correa, G.; Analysis of the cathode side of a PEMFC varying design parameters to optimize current distribution and power density; Elsevier Science SA; Journal of Electroanalytical Chemistry; 880; 114820; 1-2021; 1-321572-6657CONICET DigitalCONICETenginfo:eu-repo/semantics/altIdentifier/url/https://www.sciencedirect.com/science/article/abs/pii/S1572665720310493info:eu-repo/semantics/altIdentifier/doi/10.1016/j.jelechem.2020.114820info:eu-repo/semantics/openAccesshttps://creativecommons.org/licenses/by-nc-sa/2.5/ar/reponame:CONICET Digital (CONICET)instname:Consejo Nacional de Investigaciones Científicas y Técnicas2025-09-29T09:37:33Zoai:ri.conicet.gov.ar:11336/137488instacron:CONICETInstitucionalhttp://ri.conicet.gov.ar/Organismo científico-tecnológicoNo correspondehttp://ri.conicet.gov.ar/oai/requestdasensio@conicet.gov.ar; lcarlino@conicet.gov.arArgentinaNo correspondeNo correspondeNo correspondeopendoar:34982025-09-29 09:37:33.512CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicasfalse |
dc.title.none.fl_str_mv |
Analysis of the cathode side of a PEMFC varying design parameters to optimize current distribution and power density |
title |
Analysis of the cathode side of a PEMFC varying design parameters to optimize current distribution and power density |
spellingShingle |
Analysis of the cathode side of a PEMFC varying design parameters to optimize current distribution and power density Falaguerra, Tomas CATHODE PEMFC MODEL CURRENT DISTRIBUTION OPTIMIZATION STATISTICAL TOOLS TAGUCHI |
title_short |
Analysis of the cathode side of a PEMFC varying design parameters to optimize current distribution and power density |
title_full |
Analysis of the cathode side of a PEMFC varying design parameters to optimize current distribution and power density |
title_fullStr |
Analysis of the cathode side of a PEMFC varying design parameters to optimize current distribution and power density |
title_full_unstemmed |
Analysis of the cathode side of a PEMFC varying design parameters to optimize current distribution and power density |
title_sort |
Analysis of the cathode side of a PEMFC varying design parameters to optimize current distribution and power density |
dc.creator.none.fl_str_mv |
Falaguerra, Tomas Muñoz, P. Correa, G. |
author |
Falaguerra, Tomas |
author_facet |
Falaguerra, Tomas Muñoz, P. Correa, G. |
author_role |
author |
author2 |
Muñoz, P. Correa, G. |
author2_role |
author author |
dc.subject.none.fl_str_mv |
CATHODE PEMFC MODEL CURRENT DISTRIBUTION OPTIMIZATION STATISTICAL TOOLS TAGUCHI |
topic |
CATHODE PEMFC MODEL CURRENT DISTRIBUTION OPTIMIZATION STATISTICAL TOOLS TAGUCHI |
purl_subject.fl_str_mv |
https://purl.org/becyt/ford/2.4 https://purl.org/becyt/ford/2 |
dc.description.none.fl_txt_mv |
The amount and distribution over the active area of current density produced by the stack is a key aspect of a fuel cell performance. The performance of a proton exchange membrane fuel cell (PEMFC) is affected by many factors, including the operating conditions, flow field and manifold design, and membrane performance. In the present study, a 3D multiphysics model of a PEMFC half-cell focused in the cathode side is developed. Statistical analysis tools are proposed to quantitatively evaluate the current density distribution on the active area of the electrode in order to guarantee a proper distribution while maintaining power density. The analysis was done choosing four design parameters at three different levels on which a fractional factorial experimental design provided by the Taguchi method was applied. Finally the 0.65 V working potential, that guarantees a good power generation and its adequate density current distribution on the active area of the cell, is selected. The best conditions were obtained with geometries of parallel channels, maximum gas diffusion layer porosity, maximum inlet air velocity and minimum vapor fraction, this combination improves 2.31 times the power generated in the worst case analyzed. Fil: Falaguerra, Tomas. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro de Investigaciones y Transferencia de Catamarca. Universidad Nacional de Catamarca. Centro de Investigaciones y Transferencia de Catamarca; Argentina Fil: Muñoz, P.. Universidad Nacional de Catamarca; Argentina Fil: Correa, G.. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro de Investigaciones y Transferencia de Catamarca. Universidad Nacional de Catamarca. Centro de Investigaciones y Transferencia de Catamarca; Argentina |
description |
The amount and distribution over the active area of current density produced by the stack is a key aspect of a fuel cell performance. The performance of a proton exchange membrane fuel cell (PEMFC) is affected by many factors, including the operating conditions, flow field and manifold design, and membrane performance. In the present study, a 3D multiphysics model of a PEMFC half-cell focused in the cathode side is developed. Statistical analysis tools are proposed to quantitatively evaluate the current density distribution on the active area of the electrode in order to guarantee a proper distribution while maintaining power density. The analysis was done choosing four design parameters at three different levels on which a fractional factorial experimental design provided by the Taguchi method was applied. Finally the 0.65 V working potential, that guarantees a good power generation and its adequate density current distribution on the active area of the cell, is selected. The best conditions were obtained with geometries of parallel channels, maximum gas diffusion layer porosity, maximum inlet air velocity and minimum vapor fraction, this combination improves 2.31 times the power generated in the worst case analyzed. |
publishDate |
2021 |
dc.date.none.fl_str_mv |
2021-01 |
dc.type.none.fl_str_mv |
info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion http://purl.org/coar/resource_type/c_6501 info:ar-repo/semantics/articulo |
format |
article |
status_str |
publishedVersion |
dc.identifier.none.fl_str_mv |
http://hdl.handle.net/11336/137488 Falaguerra, Tomas; Muñoz, P.; Correa, G.; Analysis of the cathode side of a PEMFC varying design parameters to optimize current distribution and power density; Elsevier Science SA; Journal of Electroanalytical Chemistry; 880; 114820; 1-2021; 1-32 1572-6657 CONICET Digital CONICET |
url |
http://hdl.handle.net/11336/137488 |
identifier_str_mv |
Falaguerra, Tomas; Muñoz, P.; Correa, G.; Analysis of the cathode side of a PEMFC varying design parameters to optimize current distribution and power density; Elsevier Science SA; Journal of Electroanalytical Chemistry; 880; 114820; 1-2021; 1-32 1572-6657 CONICET Digital CONICET |
dc.language.none.fl_str_mv |
eng |
language |
eng |
dc.relation.none.fl_str_mv |
info:eu-repo/semantics/altIdentifier/url/https://www.sciencedirect.com/science/article/abs/pii/S1572665720310493 info:eu-repo/semantics/altIdentifier/doi/10.1016/j.jelechem.2020.114820 |
dc.rights.none.fl_str_mv |
info:eu-repo/semantics/openAccess https://creativecommons.org/licenses/by-nc-sa/2.5/ar/ |
eu_rights_str_mv |
openAccess |
rights_invalid_str_mv |
https://creativecommons.org/licenses/by-nc-sa/2.5/ar/ |
dc.format.none.fl_str_mv |
application/pdf application/pdf application/pdf |
dc.publisher.none.fl_str_mv |
Elsevier Science SA |
publisher.none.fl_str_mv |
Elsevier Science SA |
dc.source.none.fl_str_mv |
reponame:CONICET Digital (CONICET) instname:Consejo Nacional de Investigaciones Científicas y Técnicas |
reponame_str |
CONICET Digital (CONICET) |
collection |
CONICET Digital (CONICET) |
instname_str |
Consejo Nacional de Investigaciones Científicas y Técnicas |
repository.name.fl_str_mv |
CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicas |
repository.mail.fl_str_mv |
dasensio@conicet.gov.ar; lcarlino@conicet.gov.ar |
_version_ |
1844613183449333760 |
score |
13.070432 |