Glycerol-based additives of poly(3-hydroxybutyrate) films
- Autores
- Quispe, Mayte Milenka; Lopez, Olivia Valeria; Boina, Dhahabia Abdallah; Stumbé, Jean François; Villar, Marcelo Armando
- Año de publicación
- 2021
- Idioma
- inglés
- Tipo de recurso
- artículo
- Estado
- versión publicada
- Descripción
- Glycerol (G), polyglycerols (PGs), glycerol triacetate (GTA), and glycerol tributyrate (GTB) were studied as additives of poly(3-hydroxybutyrate) (PHB). The effect of different concentrations (5–30%) of these compounds on microstructure and final properties of PHB films were evaluated. Microscopic studies revealed that samples with GTA and GTB presented uniform microstructure, meanwhile those containing G and PGs evidenced additives exudation. PHB exhibited a ring banded spherulitic structure and these additives, mainly G and PGs, induced modifications during polymer isothermal crystallization. All studied additives decreased PHB melting temperature, facilitating its thermal processability. GTA and GTB addition induced a reduction in PHB glass transition temperature, demonstrating their plasticizing effect. PHB films with GTA and GTB showed the best mechanical performance since they presented the highest deformation at break and the lowest maximum tensile strength, especially those with 30% GTB. Otherwise, G and PGs addition decreased films mechanical properties due to a prodegradative effect induced by them. GTB and PGs increased films water vapor permeability, meanwhile G and GTA decreased this barrier property.
Fil: Quispe, Mayte Milenka. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Bahía Blanca. Planta Piloto de Ingeniería Química. Universidad Nacional del Sur. Planta Piloto de Ingeniería Química; Argentina
Fil: Lopez, Olivia Valeria. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Bahía Blanca. Planta Piloto de Ingeniería Química. Universidad Nacional del Sur. Planta Piloto de Ingeniería Química; Argentina
Fil: Boina, Dhahabia Abdallah. Institut Jean-Baptiste Donnet. Equipe Chimie et Physico-Chimie des Polymères. Laboratoire de Photochimie et d’Ingénierie Macromoléculaires; Alemania
Fil: Stumbé, Jean François. Institut Jean-Baptiste Donnet. Equipe Chimie et Physico-Chimie des Polymères. Laboratoire de Photochimie et d’Ingénierie Macromoléculaires; Alemania
Fil: Villar, Marcelo Armando. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Bahía Blanca. Planta Piloto de Ingeniería Química. Universidad Nacional del Sur. Planta Piloto de Ingeniería Química; Argentina - Materia
-
FILMS
GLYCEROL-BASED ADDITIVES
POLY(3-HYDROXYBUTYRATE)
PROPERTIES - Nivel de accesibilidad
- acceso abierto
- Condiciones de uso
- https://creativecommons.org/licenses/by-nc-nd/2.5/ar/
- Repositorio
- Institución
- Consejo Nacional de Investigaciones Científicas y Técnicas
- OAI Identificador
- oai:ri.conicet.gov.ar:11336/136693
Ver los metadatos del registro completo
id |
CONICETDig_1d7792ab8e48228b3c589db4c40ba8d7 |
---|---|
oai_identifier_str |
oai:ri.conicet.gov.ar:11336/136693 |
network_acronym_str |
CONICETDig |
repository_id_str |
3498 |
network_name_str |
CONICET Digital (CONICET) |
spelling |
Glycerol-based additives of poly(3-hydroxybutyrate) filmsQuispe, Mayte MilenkaLopez, Olivia ValeriaBoina, Dhahabia AbdallahStumbé, Jean FrançoisVillar, Marcelo ArmandoFILMSGLYCEROL-BASED ADDITIVESPOLY(3-HYDROXYBUTYRATE)PROPERTIEShttps://purl.org/becyt/ford/2.5https://purl.org/becyt/ford/2Glycerol (G), polyglycerols (PGs), glycerol triacetate (GTA), and glycerol tributyrate (GTB) were studied as additives of poly(3-hydroxybutyrate) (PHB). The effect of different concentrations (5–30%) of these compounds on microstructure and final properties of PHB films were evaluated. Microscopic studies revealed that samples with GTA and GTB presented uniform microstructure, meanwhile those containing G and PGs evidenced additives exudation. PHB exhibited a ring banded spherulitic structure and these additives, mainly G and PGs, induced modifications during polymer isothermal crystallization. All studied additives decreased PHB melting temperature, facilitating its thermal processability. GTA and GTB addition induced a reduction in PHB glass transition temperature, demonstrating their plasticizing effect. PHB films with GTA and GTB showed the best mechanical performance since they presented the highest deformation at break and the lowest maximum tensile strength, especially those with 30% GTB. Otherwise, G and PGs addition decreased films mechanical properties due to a prodegradative effect induced by them. GTB and PGs increased films water vapor permeability, meanwhile G and GTA decreased this barrier property.Fil: Quispe, Mayte Milenka. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Bahía Blanca. Planta Piloto de Ingeniería Química. Universidad Nacional del Sur. Planta Piloto de Ingeniería Química; ArgentinaFil: Lopez, Olivia Valeria. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Bahía Blanca. Planta Piloto de Ingeniería Química. Universidad Nacional del Sur. Planta Piloto de Ingeniería Química; ArgentinaFil: Boina, Dhahabia Abdallah. Institut Jean-Baptiste Donnet. Equipe Chimie et Physico-Chimie des Polymères. Laboratoire de Photochimie et d’Ingénierie Macromoléculaires; AlemaniaFil: Stumbé, Jean François. Institut Jean-Baptiste Donnet. Equipe Chimie et Physico-Chimie des Polymères. Laboratoire de Photochimie et d’Ingénierie Macromoléculaires; AlemaniaFil: Villar, Marcelo Armando. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Bahía Blanca. Planta Piloto de Ingeniería Química. Universidad Nacional del Sur. Planta Piloto de Ingeniería Química; ArgentinaElsevier2021-01-01info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionhttp://purl.org/coar/resource_type/c_6501info:ar-repo/semantics/articuloapplication/pdfapplication/pdfapplication/pdfhttp://hdl.handle.net/11336/136693Quispe, Mayte Milenka; Lopez, Olivia Valeria; Boina, Dhahabia Abdallah; Stumbé, Jean François; Villar, Marcelo Armando; Glycerol-based additives of poly(3-hydroxybutyrate) films; Elsevier; Polymer Testing; 93; 3; 1-1-2021; 296-3040142-9418CONICET DigitalCONICETenginfo:eu-repo/semantics/altIdentifier/doi/10.1016/j.polymertesting.2020.107005info:eu-repo/semantics/altIdentifier/url/https://www.sciencedirect.com/science/article/pii/S0142941820322340info:eu-repo/semantics/openAccesshttps://creativecommons.org/licenses/by-nc-nd/2.5/ar/reponame:CONICET Digital (CONICET)instname:Consejo Nacional de Investigaciones Científicas y Técnicas2025-09-03T09:57:39Zoai:ri.conicet.gov.ar:11336/136693instacron:CONICETInstitucionalhttp://ri.conicet.gov.ar/Organismo científico-tecnológicoNo correspondehttp://ri.conicet.gov.ar/oai/requestdasensio@conicet.gov.ar; lcarlino@conicet.gov.arArgentinaNo correspondeNo correspondeNo correspondeopendoar:34982025-09-03 09:57:40.278CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicasfalse |
dc.title.none.fl_str_mv |
Glycerol-based additives of poly(3-hydroxybutyrate) films |
title |
Glycerol-based additives of poly(3-hydroxybutyrate) films |
spellingShingle |
Glycerol-based additives of poly(3-hydroxybutyrate) films Quispe, Mayte Milenka FILMS GLYCEROL-BASED ADDITIVES POLY(3-HYDROXYBUTYRATE) PROPERTIES |
title_short |
Glycerol-based additives of poly(3-hydroxybutyrate) films |
title_full |
Glycerol-based additives of poly(3-hydroxybutyrate) films |
title_fullStr |
Glycerol-based additives of poly(3-hydroxybutyrate) films |
title_full_unstemmed |
Glycerol-based additives of poly(3-hydroxybutyrate) films |
title_sort |
Glycerol-based additives of poly(3-hydroxybutyrate) films |
dc.creator.none.fl_str_mv |
Quispe, Mayte Milenka Lopez, Olivia Valeria Boina, Dhahabia Abdallah Stumbé, Jean François Villar, Marcelo Armando |
author |
Quispe, Mayte Milenka |
author_facet |
Quispe, Mayte Milenka Lopez, Olivia Valeria Boina, Dhahabia Abdallah Stumbé, Jean François Villar, Marcelo Armando |
author_role |
author |
author2 |
Lopez, Olivia Valeria Boina, Dhahabia Abdallah Stumbé, Jean François Villar, Marcelo Armando |
author2_role |
author author author author |
dc.subject.none.fl_str_mv |
FILMS GLYCEROL-BASED ADDITIVES POLY(3-HYDROXYBUTYRATE) PROPERTIES |
topic |
FILMS GLYCEROL-BASED ADDITIVES POLY(3-HYDROXYBUTYRATE) PROPERTIES |
purl_subject.fl_str_mv |
https://purl.org/becyt/ford/2.5 https://purl.org/becyt/ford/2 |
dc.description.none.fl_txt_mv |
Glycerol (G), polyglycerols (PGs), glycerol triacetate (GTA), and glycerol tributyrate (GTB) were studied as additives of poly(3-hydroxybutyrate) (PHB). The effect of different concentrations (5–30%) of these compounds on microstructure and final properties of PHB films were evaluated. Microscopic studies revealed that samples with GTA and GTB presented uniform microstructure, meanwhile those containing G and PGs evidenced additives exudation. PHB exhibited a ring banded spherulitic structure and these additives, mainly G and PGs, induced modifications during polymer isothermal crystallization. All studied additives decreased PHB melting temperature, facilitating its thermal processability. GTA and GTB addition induced a reduction in PHB glass transition temperature, demonstrating their plasticizing effect. PHB films with GTA and GTB showed the best mechanical performance since they presented the highest deformation at break and the lowest maximum tensile strength, especially those with 30% GTB. Otherwise, G and PGs addition decreased films mechanical properties due to a prodegradative effect induced by them. GTB and PGs increased films water vapor permeability, meanwhile G and GTA decreased this barrier property. Fil: Quispe, Mayte Milenka. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Bahía Blanca. Planta Piloto de Ingeniería Química. Universidad Nacional del Sur. Planta Piloto de Ingeniería Química; Argentina Fil: Lopez, Olivia Valeria. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Bahía Blanca. Planta Piloto de Ingeniería Química. Universidad Nacional del Sur. Planta Piloto de Ingeniería Química; Argentina Fil: Boina, Dhahabia Abdallah. Institut Jean-Baptiste Donnet. Equipe Chimie et Physico-Chimie des Polymères. Laboratoire de Photochimie et d’Ingénierie Macromoléculaires; Alemania Fil: Stumbé, Jean François. Institut Jean-Baptiste Donnet. Equipe Chimie et Physico-Chimie des Polymères. Laboratoire de Photochimie et d’Ingénierie Macromoléculaires; Alemania Fil: Villar, Marcelo Armando. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Bahía Blanca. Planta Piloto de Ingeniería Química. Universidad Nacional del Sur. Planta Piloto de Ingeniería Química; Argentina |
description |
Glycerol (G), polyglycerols (PGs), glycerol triacetate (GTA), and glycerol tributyrate (GTB) were studied as additives of poly(3-hydroxybutyrate) (PHB). The effect of different concentrations (5–30%) of these compounds on microstructure and final properties of PHB films were evaluated. Microscopic studies revealed that samples with GTA and GTB presented uniform microstructure, meanwhile those containing G and PGs evidenced additives exudation. PHB exhibited a ring banded spherulitic structure and these additives, mainly G and PGs, induced modifications during polymer isothermal crystallization. All studied additives decreased PHB melting temperature, facilitating its thermal processability. GTA and GTB addition induced a reduction in PHB glass transition temperature, demonstrating their plasticizing effect. PHB films with GTA and GTB showed the best mechanical performance since they presented the highest deformation at break and the lowest maximum tensile strength, especially those with 30% GTB. Otherwise, G and PGs addition decreased films mechanical properties due to a prodegradative effect induced by them. GTB and PGs increased films water vapor permeability, meanwhile G and GTA decreased this barrier property. |
publishDate |
2021 |
dc.date.none.fl_str_mv |
2021-01-01 |
dc.type.none.fl_str_mv |
info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion http://purl.org/coar/resource_type/c_6501 info:ar-repo/semantics/articulo |
format |
article |
status_str |
publishedVersion |
dc.identifier.none.fl_str_mv |
http://hdl.handle.net/11336/136693 Quispe, Mayte Milenka; Lopez, Olivia Valeria; Boina, Dhahabia Abdallah; Stumbé, Jean François; Villar, Marcelo Armando; Glycerol-based additives of poly(3-hydroxybutyrate) films; Elsevier; Polymer Testing; 93; 3; 1-1-2021; 296-304 0142-9418 CONICET Digital CONICET |
url |
http://hdl.handle.net/11336/136693 |
identifier_str_mv |
Quispe, Mayte Milenka; Lopez, Olivia Valeria; Boina, Dhahabia Abdallah; Stumbé, Jean François; Villar, Marcelo Armando; Glycerol-based additives of poly(3-hydroxybutyrate) films; Elsevier; Polymer Testing; 93; 3; 1-1-2021; 296-304 0142-9418 CONICET Digital CONICET |
dc.language.none.fl_str_mv |
eng |
language |
eng |
dc.relation.none.fl_str_mv |
info:eu-repo/semantics/altIdentifier/doi/10.1016/j.polymertesting.2020.107005 info:eu-repo/semantics/altIdentifier/url/https://www.sciencedirect.com/science/article/pii/S0142941820322340 |
dc.rights.none.fl_str_mv |
info:eu-repo/semantics/openAccess https://creativecommons.org/licenses/by-nc-nd/2.5/ar/ |
eu_rights_str_mv |
openAccess |
rights_invalid_str_mv |
https://creativecommons.org/licenses/by-nc-nd/2.5/ar/ |
dc.format.none.fl_str_mv |
application/pdf application/pdf application/pdf |
dc.publisher.none.fl_str_mv |
Elsevier |
publisher.none.fl_str_mv |
Elsevier |
dc.source.none.fl_str_mv |
reponame:CONICET Digital (CONICET) instname:Consejo Nacional de Investigaciones Científicas y Técnicas |
reponame_str |
CONICET Digital (CONICET) |
collection |
CONICET Digital (CONICET) |
instname_str |
Consejo Nacional de Investigaciones Científicas y Técnicas |
repository.name.fl_str_mv |
CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicas |
repository.mail.fl_str_mv |
dasensio@conicet.gov.ar; lcarlino@conicet.gov.ar |
_version_ |
1842269475836002304 |
score |
13.13397 |