A preliminary simulation for the development of an implantable pulsatile blood pump

Autores
Di Paolo, Jose; Insfrán, Jordán Francisco; Fries, Exequiel R.; Campana, Diego Martin; Berli, Marcelo Eduardo; Ubal, Sebastian
Año de publicación
2014
Idioma
inglés
Tipo de recurso
artículo
Estado
versión publicada
Descripción
A preliminary study of a new pulsatile pump, that will work to a frequency greater than 1 Hz, is presented. The fluid-structure interaction between a Newtonian blood flow and a piston drive that moves with periodic speed is simulated. The mechanism is of double effect and has four valves, two at the input flow and two at the output flow; the valves are simulated with specified velocity of closing and reopening. The simulation is made with a finite elements software named COMSOL Multiphysics 3.3 to resolve the flow in a preliminary planar configuration. The geometry is 2D to determine areas of high speeds and high shear stresses that can cause hemolysis and platelet aggregation. The opening and closing valves are modelled by solid structure interacting with flow, the rhythmic opening and closing are synchronized with the piston harmonic movement. The boundary conditions at the input and output areas are only normal traction with reference pressure. On the other hand, the fluid structure interactions are manifested due to the non-slip boundary conditions over the piston moving surfaces, moving valve contours and fix pump walls. The non-physiologic frequency pulsatile pump, from the viewpoint of fluid flow analysis, is predicted feasible and with characteristic of low hemolysis and low thrombogenesis, because the stress tension and resident time are smaller than the limit and the vortices are destroyed for the periodic flow.
Fil: Di Paolo, Jose. Universidad Nacional de Entre Ríos. Facultad de Ingeniería. Departamento de Física Química. Laboratorio de Biomecánica Computacional; Argentina
Fil: Insfrán, Jordán Francisco. Universidad Nacional de Entre Ríos. Facultad de Ingeniería. Departamento de Física Química. Laboratorio de Biomecánica Computacional; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina
Fil: Fries, Exequiel R.. Universidad Nacional de Entre Ríos. Facultad de Ingeniería. Departamento de Física Química. Laboratorio de Biomecánica Computacional; Argentina
Fil: Campana, Diego Martin. Universidad Nacional de Entre Ríos. Facultad de Ingeniería. Departamento de Física Química. Laboratorio de Biomecánica Computacional; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina
Fil: Berli, Marcelo Eduardo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Santa Fe. Instituto de Desarrollo Tecnológico para la Industria Química (i); Argentina. Universidad Nacional de Entre Ríos. Facultad de Ingeniería. Departamento de Física Química. Laboratorio de Biomecánica Computacional; Argentina
Fil: Ubal, Sebastian. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Santa Fe. Instituto de Desarrollo Tecnológico para la Industria Química (i); Argentina. Universidad Nacional de Entre Ríos. Facultad de Ingeniería. Departamento de Física Química. Laboratorio de Biomecánica Computacional; Argentina
Materia
Ventricular Assist Pump
Blood Flow
Fluid Structure Interaction
Finite Element Method
Cardiac Insufficiency
Nivel de accesibilidad
acceso abierto
Condiciones de uso
https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
Repositorio
CONICET Digital (CONICET)
Institución
Consejo Nacional de Investigaciones Científicas y Técnicas
OAI Identificador
oai:ri.conicet.gov.ar:11336/9190
Acceder
id CONICETDig_19824a092cb5ed0a58e6ab30c4b7aa18
oai_identifier_str oai:ri.conicet.gov.ar:11336/9190
network_acronym_str CONICETDig
repository_id_str 3498
network_name_str CONICET Digital (CONICET)
spelling A preliminary simulation for the development of an implantable pulsatile blood pumpDi Paolo, JoseInsfrán, Jordán FranciscoFries, Exequiel R.Campana, Diego MartinBerli, Marcelo EduardoUbal, SebastianVentricular Assist PumpBlood FlowFluid Structure InteractionFinite Element MethodCardiac Insufficiencyhttps://purl.org/becyt/ford/2.6https://purl.org/becyt/ford/2A preliminary study of a new pulsatile pump, that will work to a frequency greater than 1 Hz, is presented. The fluid-structure interaction between a Newtonian blood flow and a piston drive that moves with periodic speed is simulated. The mechanism is of double effect and has four valves, two at the input flow and two at the output flow; the valves are simulated with specified velocity of closing and reopening. The simulation is made with a finite elements software named COMSOL Multiphysics 3.3 to resolve the flow in a preliminary planar configuration. The geometry is 2D to determine areas of high speeds and high shear stresses that can cause hemolysis and platelet aggregation. The opening and closing valves are modelled by solid structure interacting with flow, the rhythmic opening and closing are synchronized with the piston harmonic movement. The boundary conditions at the input and output areas are only normal traction with reference pressure. On the other hand, the fluid structure interactions are manifested due to the non-slip boundary conditions over the piston moving surfaces, moving valve contours and fix pump walls. The non-physiologic frequency pulsatile pump, from the viewpoint of fluid flow analysis, is predicted feasible and with characteristic of low hemolysis and low thrombogenesis, because the stress tension and resident time are smaller than the limit and the vortices are destroyed for the periodic flow.Fil: Di Paolo, Jose. Universidad Nacional de Entre Ríos. Facultad de Ingeniería. Departamento de Física Química. Laboratorio de Biomecánica Computacional; ArgentinaFil: Insfrán, Jordán Francisco. Universidad Nacional de Entre Ríos. Facultad de Ingeniería. Departamento de Física Química. Laboratorio de Biomecánica Computacional; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Fries, Exequiel R.. Universidad Nacional de Entre Ríos. Facultad de Ingeniería. Departamento de Física Química. Laboratorio de Biomecánica Computacional; ArgentinaFil: Campana, Diego Martin. Universidad Nacional de Entre Ríos. Facultad de Ingeniería. Departamento de Física Química. Laboratorio de Biomecánica Computacional; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Berli, Marcelo Eduardo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Santa Fe. Instituto de Desarrollo Tecnológico para la Industria Química (i); Argentina. Universidad Nacional de Entre Ríos. Facultad de Ingeniería. Departamento de Física Química. Laboratorio de Biomecánica Computacional; ArgentinaFil: Ubal, Sebastian. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Santa Fe. Instituto de Desarrollo Tecnológico para la Industria Química (i); Argentina. Universidad Nacional de Entre Ríos. Facultad de Ingeniería. Departamento de Física Química. Laboratorio de Biomecánica Computacional; ArgentinaTechno-press2014-06info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionhttp://purl.org/coar/resource_type/c_6501info:ar-repo/semantics/articuloapplication/pdfapplication/pdfapplication/pdfhttp://hdl.handle.net/11336/9190Di Paolo, Jose; Insfrán, Jordán Francisco; Fries, Exequiel R.; Campana, Diego Martin; Berli, Marcelo Eduardo; et al.; A preliminary simulation for the development of an implantable pulsatile blood pump; Techno-press; Advances in Biomechanics and Applications; 1; 2; 6-2014; 127-1412287-2094enginfo:eu-repo/semantics/altIdentifier/url/http://technopress.kaist.ac.kr/?page=container&journal=aba&volume=1&num=2info:eu-repo/semantics/altIdentifier/doi/10.12989/aba.2014.1.2.127info:eu-repo/semantics/openAccesshttps://creativecommons.org/licenses/by-nc-sa/2.5/ar/reponame:CONICET Digital (CONICET)instname:Consejo Nacional de Investigaciones Científicas y Técnicas2025-09-10T13:10:34Zoai:ri.conicet.gov.ar:11336/9190instacron:CONICETInstitucionalhttp://ri.conicet.gov.ar/Organismo científico-tecnológicoNo correspondehttp://ri.conicet.gov.ar/oai/requestdasensio@conicet.gov.ar; lcarlino@conicet.gov.arArgentinaNo correspondeNo correspondeNo correspondeopendoar:34982025-09-10 13:10:35.024CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicasfalse
dc.title.none.fl_str_mv A preliminary simulation for the development of an implantable pulsatile blood pump
title A preliminary simulation for the development of an implantable pulsatile blood pump
spellingShingle A preliminary simulation for the development of an implantable pulsatile blood pump
Di Paolo, Jose
Ventricular Assist Pump
Blood Flow
Fluid Structure Interaction
Finite Element Method
Cardiac Insufficiency
title_short A preliminary simulation for the development of an implantable pulsatile blood pump
title_full A preliminary simulation for the development of an implantable pulsatile blood pump
title_fullStr A preliminary simulation for the development of an implantable pulsatile blood pump
title_full_unstemmed A preliminary simulation for the development of an implantable pulsatile blood pump
title_sort A preliminary simulation for the development of an implantable pulsatile blood pump
dc.creator.none.fl_str_mv Di Paolo, Jose
Insfrán, Jordán Francisco
Fries, Exequiel R.
Campana, Diego Martin
Berli, Marcelo Eduardo
Ubal, Sebastian
author Di Paolo, Jose
author_facet Di Paolo, Jose
Insfrán, Jordán Francisco
Fries, Exequiel R.
Campana, Diego Martin
Berli, Marcelo Eduardo
Ubal, Sebastian
author_role author
author2 Insfrán, Jordán Francisco
Fries, Exequiel R.
Campana, Diego Martin
Berli, Marcelo Eduardo
Ubal, Sebastian
author2_role author
author
author
author
author
dc.subject.none.fl_str_mv Ventricular Assist Pump
Blood Flow
Fluid Structure Interaction
Finite Element Method
Cardiac Insufficiency
topic Ventricular Assist Pump
Blood Flow
Fluid Structure Interaction
Finite Element Method
Cardiac Insufficiency
purl_subject.fl_str_mv https://purl.org/becyt/ford/2.6
https://purl.org/becyt/ford/2
dc.description.none.fl_txt_mv A preliminary study of a new pulsatile pump, that will work to a frequency greater than 1 Hz, is presented. The fluid-structure interaction between a Newtonian blood flow and a piston drive that moves with periodic speed is simulated. The mechanism is of double effect and has four valves, two at the input flow and two at the output flow; the valves are simulated with specified velocity of closing and reopening. The simulation is made with a finite elements software named COMSOL Multiphysics 3.3 to resolve the flow in a preliminary planar configuration. The geometry is 2D to determine areas of high speeds and high shear stresses that can cause hemolysis and platelet aggregation. The opening and closing valves are modelled by solid structure interacting with flow, the rhythmic opening and closing are synchronized with the piston harmonic movement. The boundary conditions at the input and output areas are only normal traction with reference pressure. On the other hand, the fluid structure interactions are manifested due to the non-slip boundary conditions over the piston moving surfaces, moving valve contours and fix pump walls. The non-physiologic frequency pulsatile pump, from the viewpoint of fluid flow analysis, is predicted feasible and with characteristic of low hemolysis and low thrombogenesis, because the stress tension and resident time are smaller than the limit and the vortices are destroyed for the periodic flow.
Fil: Di Paolo, Jose. Universidad Nacional de Entre Ríos. Facultad de Ingeniería. Departamento de Física Química. Laboratorio de Biomecánica Computacional; Argentina
Fil: Insfrán, Jordán Francisco. Universidad Nacional de Entre Ríos. Facultad de Ingeniería. Departamento de Física Química. Laboratorio de Biomecánica Computacional; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina
Fil: Fries, Exequiel R.. Universidad Nacional de Entre Ríos. Facultad de Ingeniería. Departamento de Física Química. Laboratorio de Biomecánica Computacional; Argentina
Fil: Campana, Diego Martin. Universidad Nacional de Entre Ríos. Facultad de Ingeniería. Departamento de Física Química. Laboratorio de Biomecánica Computacional; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina
Fil: Berli, Marcelo Eduardo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Santa Fe. Instituto de Desarrollo Tecnológico para la Industria Química (i); Argentina. Universidad Nacional de Entre Ríos. Facultad de Ingeniería. Departamento de Física Química. Laboratorio de Biomecánica Computacional; Argentina
Fil: Ubal, Sebastian. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Santa Fe. Instituto de Desarrollo Tecnológico para la Industria Química (i); Argentina. Universidad Nacional de Entre Ríos. Facultad de Ingeniería. Departamento de Física Química. Laboratorio de Biomecánica Computacional; Argentina
description A preliminary study of a new pulsatile pump, that will work to a frequency greater than 1 Hz, is presented. The fluid-structure interaction between a Newtonian blood flow and a piston drive that moves with periodic speed is simulated. The mechanism is of double effect and has four valves, two at the input flow and two at the output flow; the valves are simulated with specified velocity of closing and reopening. The simulation is made with a finite elements software named COMSOL Multiphysics 3.3 to resolve the flow in a preliminary planar configuration. The geometry is 2D to determine areas of high speeds and high shear stresses that can cause hemolysis and platelet aggregation. The opening and closing valves are modelled by solid structure interacting with flow, the rhythmic opening and closing are synchronized with the piston harmonic movement. The boundary conditions at the input and output areas are only normal traction with reference pressure. On the other hand, the fluid structure interactions are manifested due to the non-slip boundary conditions over the piston moving surfaces, moving valve contours and fix pump walls. The non-physiologic frequency pulsatile pump, from the viewpoint of fluid flow analysis, is predicted feasible and with characteristic of low hemolysis and low thrombogenesis, because the stress tension and resident time are smaller than the limit and the vortices are destroyed for the periodic flow.
publishDate 2014
dc.date.none.fl_str_mv 2014-06
dc.type.none.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
http://purl.org/coar/resource_type/c_6501
info:ar-repo/semantics/articulo
format article
status_str publishedVersion
dc.identifier.none.fl_str_mv http://hdl.handle.net/11336/9190
Di Paolo, Jose; Insfrán, Jordán Francisco; Fries, Exequiel R.; Campana, Diego Martin; Berli, Marcelo Eduardo; et al.; A preliminary simulation for the development of an implantable pulsatile blood pump; Techno-press; Advances in Biomechanics and Applications; 1; 2; 6-2014; 127-141
2287-2094
url http://hdl.handle.net/11336/9190
identifier_str_mv Di Paolo, Jose; Insfrán, Jordán Francisco; Fries, Exequiel R.; Campana, Diego Martin; Berli, Marcelo Eduardo; et al.; A preliminary simulation for the development of an implantable pulsatile blood pump; Techno-press; Advances in Biomechanics and Applications; 1; 2; 6-2014; 127-141
2287-2094
dc.language.none.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv info:eu-repo/semantics/altIdentifier/url/http://technopress.kaist.ac.kr/?page=container&journal=aba&volume=1&num=2
info:eu-repo/semantics/altIdentifier/doi/10.12989/aba.2014.1.2.127
dc.rights.none.fl_str_mv info:eu-repo/semantics/openAccess
https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
eu_rights_str_mv openAccess
rights_invalid_str_mv https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
dc.format.none.fl_str_mv application/pdf
application/pdf
application/pdf
dc.publisher.none.fl_str_mv Techno-press
publisher.none.fl_str_mv Techno-press
dc.source.none.fl_str_mv reponame:CONICET Digital (CONICET)
instname:Consejo Nacional de Investigaciones Científicas y Técnicas
reponame_str CONICET Digital (CONICET)
collection CONICET Digital (CONICET)
instname_str Consejo Nacional de Investigaciones Científicas y Técnicas
repository.name.fl_str_mv CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicas
repository.mail.fl_str_mv dasensio@conicet.gov.ar; lcarlino@conicet.gov.ar
_version_ 1842980533679685632
score 13.004268

Publicaciones similares