Hydrolysis of chrome shavings; application of collagen hydrolysate and “acrylic-protein” in post tanning operations

Autores
Cantera, Carlos; De Giusti, Marisa Raquel; Sofía, Alberto
Año de publicación
1997
Idioma
inglés
Tipo de recurso
artículo
Estado
versión publicada
Descripción
The tanning industry is a generator of liquid wastes as well as tanned and non-tanned solid wastes plus those derived from the waste water treatment plant. This situation requires the introduction of “cleaner leather technologies” and of treatment systems for both effluents and solid wastes, so that pollutant discharge standards can be reached. Particularly, solid wastes from chrome tanned leather require special attention because of their volume and of the requirements by authorities for their direct disposal in landfill sites. A technological alternative for upgrading these wastes is the detanning of chrome shavings (and wet-blue trimmings) through alkaline hydrolysis assisted oy the action of proteolytic enzymes at a moderate temperature (55°C), so as to obtain a collagen hydrolysate and a “chrome cake”, both with potential applications in the tanning industry. This paper describes experiment performed in the application of collagen hydrolysates and of “acrylicprotein” polymers (acrylic acid / hydrolysed collagen polymers) in post-tanning processes for the manufacture of bovine leather for “softy” uppers. The retanning capacity of. synthesized polymers and the positive effects attained from hydrolysates in the fatliquoring process (“nutrient and cosmetic effects”) were assessed by means of a subjective evaluation and through a statistical analysis of the physico-mechanical strengths of the leathers. Results are also shown from a laboratory test with chrome tanned hide powder aimed at assessing the “retanning degree” of these products. The test was developed to allow the comparison of die reiamiing agents under analysis and to complement the retanning test.
Facultad de Ingeniería
Comisión de Investigaciones Científicas de la provincia de Buenos Aires
Materia
Química
Hydrolysis
Chrome
Leather
Nivel de accesibilidad
acceso abierto
Condiciones de uso
http://creativecommons.org/licenses/by-nc-sa/4.0/
Repositorio
SEDICI (UNLP)
Institución
Universidad Nacional de La Plata
OAI Identificador
oai:sedici.unlp.edu.ar:10915/134390

id SEDICI_625b09bd0d7536d529119e6b01715882
oai_identifier_str oai:sedici.unlp.edu.ar:10915/134390
network_acronym_str SEDICI
repository_id_str 1329
network_name_str SEDICI (UNLP)
spelling Hydrolysis of chrome shavings; application of collagen hydrolysate and “acrylic-protein” in post tanning operationsCantera, CarlosDe Giusti, Marisa RaquelSofía, AlbertoQuímicaHydrolysisChromeLeatherThe tanning industry is a generator of liquid wastes as well as tanned and non-tanned solid wastes plus those derived from the waste water treatment plant. This situation requires the introduction of “cleaner leather technologies” and of treatment systems for both effluents and solid wastes, so that pollutant discharge standards can be reached. Particularly, solid wastes from chrome tanned leather require special attention because of their volume and of the requirements by authorities for their direct disposal in landfill sites. A technological alternative for upgrading these wastes is the detanning of chrome shavings (and wet-blue trimmings) through alkaline hydrolysis assisted oy the action of proteolytic enzymes at a moderate temperature (55°C), so as to obtain a collagen hydrolysate and a “chrome cake”, both with potential applications in the tanning industry. This paper describes experiment performed in the application of collagen hydrolysates and of “acrylicprotein” polymers (acrylic acid / hydrolysed collagen polymers) in post-tanning processes for the manufacture of bovine leather for “softy” uppers. The retanning capacity of. synthesized polymers and the positive effects attained from hydrolysates in the fatliquoring process (“nutrient and cosmetic effects”) were assessed by means of a subjective evaluation and through a statistical analysis of the physico-mechanical strengths of the leathers. Results are also shown from a laboratory test with chrome tanned hide powder aimed at assessing the “retanning degree” of these products. The test was developed to allow the comparison of die reiamiing agents under analysis and to complement the retanning test.Facultad de IngenieríaComisión de Investigaciones Científicas de la provincia de Buenos Aires1997info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionArticulohttp://purl.org/coar/resource_type/c_6501info:ar-repo/semantics/articuloapplication/pdf183-191http://sedici.unlp.edu.ar/handle/10915/134390enginfo:eu-repo/semantics/openAccesshttp://creativecommons.org/licenses/by-nc-sa/4.0/Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0)reponame:SEDICI (UNLP)instname:Universidad Nacional de La Platainstacron:UNLP2025-10-22T17:14:47Zoai:sedici.unlp.edu.ar:10915/134390Institucionalhttp://sedici.unlp.edu.ar/Universidad públicaNo correspondehttp://sedici.unlp.edu.ar/oai/snrdalira@sedici.unlp.edu.arArgentinaNo correspondeNo correspondeNo correspondeopendoar:13292025-10-22 17:14:48.181SEDICI (UNLP) - Universidad Nacional de La Platafalse
dc.title.none.fl_str_mv Hydrolysis of chrome shavings; application of collagen hydrolysate and “acrylic-protein” in post tanning operations
title Hydrolysis of chrome shavings; application of collagen hydrolysate and “acrylic-protein” in post tanning operations
spellingShingle Hydrolysis of chrome shavings; application of collagen hydrolysate and “acrylic-protein” in post tanning operations
Cantera, Carlos
Química
Hydrolysis
Chrome
Leather
title_short Hydrolysis of chrome shavings; application of collagen hydrolysate and “acrylic-protein” in post tanning operations
title_full Hydrolysis of chrome shavings; application of collagen hydrolysate and “acrylic-protein” in post tanning operations
title_fullStr Hydrolysis of chrome shavings; application of collagen hydrolysate and “acrylic-protein” in post tanning operations
title_full_unstemmed Hydrolysis of chrome shavings; application of collagen hydrolysate and “acrylic-protein” in post tanning operations
title_sort Hydrolysis of chrome shavings; application of collagen hydrolysate and “acrylic-protein” in post tanning operations
dc.creator.none.fl_str_mv Cantera, Carlos
De Giusti, Marisa Raquel
Sofía, Alberto
author Cantera, Carlos
author_facet Cantera, Carlos
De Giusti, Marisa Raquel
Sofía, Alberto
author_role author
author2 De Giusti, Marisa Raquel
Sofía, Alberto
author2_role author
author
dc.subject.none.fl_str_mv Química
Hydrolysis
Chrome
Leather
topic Química
Hydrolysis
Chrome
Leather
dc.description.none.fl_txt_mv The tanning industry is a generator of liquid wastes as well as tanned and non-tanned solid wastes plus those derived from the waste water treatment plant. This situation requires the introduction of “cleaner leather technologies” and of treatment systems for both effluents and solid wastes, so that pollutant discharge standards can be reached. Particularly, solid wastes from chrome tanned leather require special attention because of their volume and of the requirements by authorities for their direct disposal in landfill sites. A technological alternative for upgrading these wastes is the detanning of chrome shavings (and wet-blue trimmings) through alkaline hydrolysis assisted oy the action of proteolytic enzymes at a moderate temperature (55°C), so as to obtain a collagen hydrolysate and a “chrome cake”, both with potential applications in the tanning industry. This paper describes experiment performed in the application of collagen hydrolysates and of “acrylicprotein” polymers (acrylic acid / hydrolysed collagen polymers) in post-tanning processes for the manufacture of bovine leather for “softy” uppers. The retanning capacity of. synthesized polymers and the positive effects attained from hydrolysates in the fatliquoring process (“nutrient and cosmetic effects”) were assessed by means of a subjective evaluation and through a statistical analysis of the physico-mechanical strengths of the leathers. Results are also shown from a laboratory test with chrome tanned hide powder aimed at assessing the “retanning degree” of these products. The test was developed to allow the comparison of die reiamiing agents under analysis and to complement the retanning test.
Facultad de Ingeniería
Comisión de Investigaciones Científicas de la provincia de Buenos Aires
description The tanning industry is a generator of liquid wastes as well as tanned and non-tanned solid wastes plus those derived from the waste water treatment plant. This situation requires the introduction of “cleaner leather technologies” and of treatment systems for both effluents and solid wastes, so that pollutant discharge standards can be reached. Particularly, solid wastes from chrome tanned leather require special attention because of their volume and of the requirements by authorities for their direct disposal in landfill sites. A technological alternative for upgrading these wastes is the detanning of chrome shavings (and wet-blue trimmings) through alkaline hydrolysis assisted oy the action of proteolytic enzymes at a moderate temperature (55°C), so as to obtain a collagen hydrolysate and a “chrome cake”, both with potential applications in the tanning industry. This paper describes experiment performed in the application of collagen hydrolysates and of “acrylicprotein” polymers (acrylic acid / hydrolysed collagen polymers) in post-tanning processes for the manufacture of bovine leather for “softy” uppers. The retanning capacity of. synthesized polymers and the positive effects attained from hydrolysates in the fatliquoring process (“nutrient and cosmetic effects”) were assessed by means of a subjective evaluation and through a statistical analysis of the physico-mechanical strengths of the leathers. Results are also shown from a laboratory test with chrome tanned hide powder aimed at assessing the “retanning degree” of these products. The test was developed to allow the comparison of die reiamiing agents under analysis and to complement the retanning test.
publishDate 1997
dc.date.none.fl_str_mv 1997
dc.type.none.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
Articulo
http://purl.org/coar/resource_type/c_6501
info:ar-repo/semantics/articulo
format article
status_str publishedVersion
dc.identifier.none.fl_str_mv http://sedici.unlp.edu.ar/handle/10915/134390
url http://sedici.unlp.edu.ar/handle/10915/134390
dc.language.none.fl_str_mv eng
language eng
dc.rights.none.fl_str_mv info:eu-repo/semantics/openAccess
http://creativecommons.org/licenses/by-nc-sa/4.0/
Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0)
eu_rights_str_mv openAccess
rights_invalid_str_mv http://creativecommons.org/licenses/by-nc-sa/4.0/
Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0)
dc.format.none.fl_str_mv application/pdf
183-191
dc.source.none.fl_str_mv reponame:SEDICI (UNLP)
instname:Universidad Nacional de La Plata
instacron:UNLP
reponame_str SEDICI (UNLP)
collection SEDICI (UNLP)
instname_str Universidad Nacional de La Plata
instacron_str UNLP
institution UNLP
repository.name.fl_str_mv SEDICI (UNLP) - Universidad Nacional de La Plata
repository.mail.fl_str_mv alira@sedici.unlp.edu.ar
_version_ 1846783533100564480
score 12.982451