Phase transformations induced by implantation of ¹²C⁻ ions into α-Fe and AISI 304 and 316 stainless steels studied by CEMS and SEM

Autores
Cabanillas, Edgardo Domingo; Filevich, A.; Mercader, Roberto Carlos
Año de publicación
1994
Idioma
inglés
Tipo de recurso
artículo
Estado
versión publicada
Descripción
Samples of AISI 304 and 316 stainless steels, initially in austenitic (first set) and martensitic states (second set) and α-Fe (third set), were implanted with 180 keV¹²C⁻ to a dose of 10¹⁷ atoms/cm² at room temperature. Surfaces were examined by SEM (scanning electron microscopy) and the crystalline-phase fractions were estimated through CEMS (conversion electron Mossbauer spectroscopy). Different grades of etching were produced by sputtering during the implantations on the stainless steel samples depending on the previous crystallographic states. CEMS data reveal the γ → α′ transformation in the initially martensitic samples and no noticeable modifications as a result of the implantation on α-Fe and austenitic samples.
Facultad de Ciencias Exactas
Materia
Física
Spectroscopy
Microscopy
Electron Microscopy
Scanning Electron Microscopy
Thin Film
Nivel de accesibilidad
acceso abierto
Condiciones de uso
http://creativecommons.org/licenses/by-nc-sa/4.0/
Repositorio
SEDICI (UNLP)
Institución
Universidad Nacional de La Plata
OAI Identificador
oai:sedici.unlp.edu.ar:10915/146267
Acceder
id SEDICI_1bf5b1c4757edac4c5bbcde9c8239aa7
oai_identifier_str oai:sedici.unlp.edu.ar:10915/146267
network_acronym_str SEDICI
repository_id_str 1329
network_name_str SEDICI (UNLP)
spelling Phase transformations induced by implantation of ¹²C⁻ ions into α-Fe and AISI 304 and 316 stainless steels studied by CEMS and SEMCabanillas, Edgardo DomingoFilevich, A.Mercader, Roberto CarlosFísicaSpectroscopyMicroscopyElectron MicroscopyScanning Electron MicroscopyThin FilmSamples of AISI 304 and 316 stainless steels, initially in austenitic (first set) and martensitic states (second set) and α-Fe (third set), were implanted with 180 keV¹²C⁻ to a dose of 10¹⁷ atoms/cm² at room temperature. Surfaces were examined by SEM (scanning electron microscopy) and the crystalline-phase fractions were estimated through CEMS (conversion electron Mossbauer spectroscopy). Different grades of etching were produced by sputtering during the implantations on the stainless steel samples depending on the previous crystallographic states. CEMS data reveal the γ → α′ transformation in the initially martensitic samples and no noticeable modifications as a result of the implantation on α-Fe and austenitic samples.Facultad de Ciencias Exactas1994info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionArticulohttp://purl.org/coar/resource_type/c_6501info:ar-repo/semantics/articuloapplication/pdf223-230http://sedici.unlp.edu.ar/handle/10915/146267enginfo:eu-repo/semantics/altIdentifier/issn/0304-3843info:eu-repo/semantics/altIdentifier/issn/1572-9540info:eu-repo/semantics/altIdentifier/doi/10.1007/bf02074276info:eu-repo/semantics/openAccesshttp://creativecommons.org/licenses/by-nc-sa/4.0/Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0)reponame:SEDICI (UNLP)instname:Universidad Nacional de La Platainstacron:UNLP2025-10-15T11:24:25Zoai:sedici.unlp.edu.ar:10915/146267Institucionalhttp://sedici.unlp.edu.ar/Universidad públicaNo correspondehttp://sedici.unlp.edu.ar/oai/snrdalira@sedici.unlp.edu.arArgentinaNo correspondeNo correspondeNo correspondeopendoar:13292025-10-15 11:24:26.002SEDICI (UNLP) - Universidad Nacional de La Platafalse
dc.title.none.fl_str_mv Phase transformations induced by implantation of ¹²C⁻ ions into α-Fe and AISI 304 and 316 stainless steels studied by CEMS and SEM
title Phase transformations induced by implantation of ¹²C⁻ ions into α-Fe and AISI 304 and 316 stainless steels studied by CEMS and SEM
spellingShingle Phase transformations induced by implantation of ¹²C⁻ ions into α-Fe and AISI 304 and 316 stainless steels studied by CEMS and SEM
Cabanillas, Edgardo Domingo
Física
Spectroscopy
Microscopy
Electron Microscopy
Scanning Electron Microscopy
Thin Film
title_short Phase transformations induced by implantation of ¹²C⁻ ions into α-Fe and AISI 304 and 316 stainless steels studied by CEMS and SEM
title_full Phase transformations induced by implantation of ¹²C⁻ ions into α-Fe and AISI 304 and 316 stainless steels studied by CEMS and SEM
title_fullStr Phase transformations induced by implantation of ¹²C⁻ ions into α-Fe and AISI 304 and 316 stainless steels studied by CEMS and SEM
title_full_unstemmed Phase transformations induced by implantation of ¹²C⁻ ions into α-Fe and AISI 304 and 316 stainless steels studied by CEMS and SEM
title_sort Phase transformations induced by implantation of ¹²C⁻ ions into α-Fe and AISI 304 and 316 stainless steels studied by CEMS and SEM
dc.creator.none.fl_str_mv Cabanillas, Edgardo Domingo
Filevich, A.
Mercader, Roberto Carlos
author Cabanillas, Edgardo Domingo
author_facet Cabanillas, Edgardo Domingo
Filevich, A.
Mercader, Roberto Carlos
author_role author
author2 Filevich, A.
Mercader, Roberto Carlos
author2_role author
author
dc.subject.none.fl_str_mv Física
Spectroscopy
Microscopy
Electron Microscopy
Scanning Electron Microscopy
Thin Film
topic Física
Spectroscopy
Microscopy
Electron Microscopy
Scanning Electron Microscopy
Thin Film
dc.description.none.fl_txt_mv Samples of AISI 304 and 316 stainless steels, initially in austenitic (first set) and martensitic states (second set) and α-Fe (third set), were implanted with 180 keV¹²C⁻ to a dose of 10¹⁷ atoms/cm² at room temperature. Surfaces were examined by SEM (scanning electron microscopy) and the crystalline-phase fractions were estimated through CEMS (conversion electron Mossbauer spectroscopy). Different grades of etching were produced by sputtering during the implantations on the stainless steel samples depending on the previous crystallographic states. CEMS data reveal the γ → α′ transformation in the initially martensitic samples and no noticeable modifications as a result of the implantation on α-Fe and austenitic samples.
Facultad de Ciencias Exactas
description Samples of AISI 304 and 316 stainless steels, initially in austenitic (first set) and martensitic states (second set) and α-Fe (third set), were implanted with 180 keV¹²C⁻ to a dose of 10¹⁷ atoms/cm² at room temperature. Surfaces were examined by SEM (scanning electron microscopy) and the crystalline-phase fractions were estimated through CEMS (conversion electron Mossbauer spectroscopy). Different grades of etching were produced by sputtering during the implantations on the stainless steel samples depending on the previous crystallographic states. CEMS data reveal the γ → α′ transformation in the initially martensitic samples and no noticeable modifications as a result of the implantation on α-Fe and austenitic samples.
publishDate 1994
dc.date.none.fl_str_mv 1994
dc.type.none.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
Articulo
http://purl.org/coar/resource_type/c_6501
info:ar-repo/semantics/articulo
format article
status_str publishedVersion
dc.identifier.none.fl_str_mv http://sedici.unlp.edu.ar/handle/10915/146267
url http://sedici.unlp.edu.ar/handle/10915/146267
dc.language.none.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv info:eu-repo/semantics/altIdentifier/issn/0304-3843
info:eu-repo/semantics/altIdentifier/issn/1572-9540
info:eu-repo/semantics/altIdentifier/doi/10.1007/bf02074276
dc.rights.none.fl_str_mv info:eu-repo/semantics/openAccess
http://creativecommons.org/licenses/by-nc-sa/4.0/
Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0)
eu_rights_str_mv openAccess
rights_invalid_str_mv http://creativecommons.org/licenses/by-nc-sa/4.0/
Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0)
dc.format.none.fl_str_mv application/pdf
223-230
dc.source.none.fl_str_mv reponame:SEDICI (UNLP)
instname:Universidad Nacional de La Plata
instacron:UNLP
reponame_str SEDICI (UNLP)
collection SEDICI (UNLP)
instname_str Universidad Nacional de La Plata
instacron_str UNLP
institution UNLP
repository.name.fl_str_mv SEDICI (UNLP) - Universidad Nacional de La Plata
repository.mail.fl_str_mv alira@sedici.unlp.edu.ar
_version_ 1846064298043899904
score 13.22299

Publicaciones similares