Influence of the silicon interlayer deposition process in the adhesion of the DLC coatings deposited on nitrided martesnitic stainless steel

Autores
Dalibón Bähler, Eugenia Laura; Brühl, Sonia Patricia; Trava-Airoldi, Vladimir Jesús; Ramírez Ramos, Marco Antonio; Lugo González, Dubrazkha Carolina
Año de publicación
2017
Idioma
inglés
Tipo de recurso
documento de conferencia
Estado
versión publicada
Descripción
The DLC coatings are characterized by good wear resistance, low friction coefficient and chemical inertness. However, they have adhesion problems when they are deposited on metallic substrates. For thisreason, a thin interlayer of different materials, such as silicon, is deposited previous to the coating in order to improve the adhesion. There are a few studies about the influence of the conditions of the silicon interlayer deposition on adhesion or properties of the coatings [2,3]. In this work, the adhesion of DLC coatings deposited on nitrided and non-nitrided martensitic stainless steel, modifying the silicon interlayer bias potential deposition, is studied.
Fil: Dalibón Bähler, Eugenia Laura. Universidad Tecnológica Nacional. Facultad Regional Concepción del Uruguay. Departamento Ingeniería Electromecánica. Grupo de Ingeniería de Superficies; Argentina.
Fil: Brühl, Sonia Patricia. Universidad Tecnológica Nacional. Facultad Regional Concepción del Uruguay. Departamento Ingeniería Electromecánica. Grupo de Ingeniería de Superficies; Argentina.
Fil: Trava-Airoldi, Vladimir Jesús. Ministério da Ciencia, Tecnologia e Innovacao. Instituto Nacional de Pesquisas Espaciais; Brasil.
Fil: Ramírez Ramos, Marco Antonio. Ministério da Ciencia, Tecnologia e Innovacao. Instituto Nacional de Pesquisas Espaciais; Brasil.
Fil: Lugo González, Dubrazkha Carolina. Ministério da Ciencia, Tecnologia e Innovacao. Instituto Nacional de Pesquisas Espaciais; Brasil.
Materia
Recubrimiento DLC
Acero inoxidable
Silicio
Nivel de accesibilidad
acceso abierto
Condiciones de uso
http://creativecommons.org/licenses/by-nc-nd/4.0/
Repositorio
Repositorio Institucional Abierto (UTN)
Institución
Universidad Tecnológica Nacional
OAI Identificador
oai:ria.utn.edu.ar:20.500.12272/4145
Acceder
id RIAUTN_e73e6a18e45d0d02f210b4d62a02cf5a
oai_identifier_str oai:ria.utn.edu.ar:20.500.12272/4145
network_acronym_str RIAUTN
repository_id_str a
network_name_str Repositorio Institucional Abierto (UTN)
spelling Influence of the silicon interlayer deposition process in the adhesion of the DLC coatings deposited on nitrided martesnitic stainless steelDalibón Bähler, Eugenia LauraBrühl, Sonia PatriciaTrava-Airoldi, Vladimir JesúsRamírez Ramos, Marco AntonioLugo González, Dubrazkha CarolinaRecubrimiento DLCAcero inoxidableSilicioThe DLC coatings are characterized by good wear resistance, low friction coefficient and chemical inertness. However, they have adhesion problems when they are deposited on metallic substrates. For thisreason, a thin interlayer of different materials, such as silicon, is deposited previous to the coating in order to improve the adhesion. There are a few studies about the influence of the conditions of the silicon interlayer deposition on adhesion or properties of the coatings [2,3]. In this work, the adhesion of DLC coatings deposited on nitrided and non-nitrided martensitic stainless steel, modifying the silicon interlayer bias potential deposition, is studied.Fil: Dalibón Bähler, Eugenia Laura. Universidad Tecnológica Nacional. Facultad Regional Concepción del Uruguay. Departamento Ingeniería Electromecánica. Grupo de Ingeniería de Superficies; Argentina.Fil: Brühl, Sonia Patricia. Universidad Tecnológica Nacional. Facultad Regional Concepción del Uruguay. Departamento Ingeniería Electromecánica. Grupo de Ingeniería de Superficies; Argentina.Fil: Trava-Airoldi, Vladimir Jesús. Ministério da Ciencia, Tecnologia e Innovacao. Instituto Nacional de Pesquisas Espaciais; Brasil.Fil: Ramírez Ramos, Marco Antonio. Ministério da Ciencia, Tecnologia e Innovacao. Instituto Nacional de Pesquisas Espaciais; Brasil.Fil: Lugo González, Dubrazkha Carolina. Ministério da Ciencia, Tecnologia e Innovacao. Instituto Nacional de Pesquisas Espaciais; Brasil.2019-11-11T14:58:12Z2019-11-11T14:58:12Z2017-08-25info:eu-repo/semantics/conferenceObjectinfo:eu-repo/semantics/publishedVersionhttp://purl.org/coar/resource_type/c_5794info:ar-repo/semantics/documentoDeConferenciaapplication/pdfapplication/pdfXXXVIII Congresso Brasileiro de Aplicações de Vácuo na Indústria e na Ciência (CBRAVIC)-III Workshop de Tratamento e Modificação de Superfícies (WTMS)(2017)http://mtc-m21b.sid.inpe.br/col/sid.inpe.br/mtc-m21b/2017/08.29.16.15/doc/submissao_101.pdfhttp://hdl.handle.net/20.500.12272/4145enginfo:eu-repo/semantics/openAccesshttp://creativecommons.org/licenses/by-nc-nd/4.0/Dalibón Bähler, Eugenia Laura ; Brühl, Sonia Patricia ; Lugo González, Dubrazkha Carlonina ; Trava-Airoldi, Vladimir Jesús ; Ramos Ramírez, Marco AntonioNo comercial con fines académicosAttribution-NonCommercial-NoDerivatives 4.0 Internacionalreponame:Repositorio Institucional Abierto (UTN)instname:Universidad Tecnológica Nacional2025-09-04T11:14:35Zoai:ria.utn.edu.ar:20.500.12272/4145instacron:UTNInstitucionalhttp://ria.utn.edu.ar/Universidad públicaNo correspondehttp://ria.utn.edu.ar/oaigestionria@rec.utn.edu.ar; fsuarez@rec.utn.edu.arArgentinaNo correspondeNo correspondeNo correspondeopendoar:a2025-09-04 11:14:35.878Repositorio Institucional Abierto (UTN) - Universidad Tecnológica Nacionalfalse
dc.title.none.fl_str_mv Influence of the silicon interlayer deposition process in the adhesion of the DLC coatings deposited on nitrided martesnitic stainless steel
title Influence of the silicon interlayer deposition process in the adhesion of the DLC coatings deposited on nitrided martesnitic stainless steel
spellingShingle Influence of the silicon interlayer deposition process in the adhesion of the DLC coatings deposited on nitrided martesnitic stainless steel
Dalibón Bähler, Eugenia Laura
Recubrimiento DLC
Acero inoxidable
Silicio
title_short Influence of the silicon interlayer deposition process in the adhesion of the DLC coatings deposited on nitrided martesnitic stainless steel
title_full Influence of the silicon interlayer deposition process in the adhesion of the DLC coatings deposited on nitrided martesnitic stainless steel
title_fullStr Influence of the silicon interlayer deposition process in the adhesion of the DLC coatings deposited on nitrided martesnitic stainless steel
title_full_unstemmed Influence of the silicon interlayer deposition process in the adhesion of the DLC coatings deposited on nitrided martesnitic stainless steel
title_sort Influence of the silicon interlayer deposition process in the adhesion of the DLC coatings deposited on nitrided martesnitic stainless steel
dc.creator.none.fl_str_mv Dalibón Bähler, Eugenia Laura
Brühl, Sonia Patricia
Trava-Airoldi, Vladimir Jesús
Ramírez Ramos, Marco Antonio
Lugo González, Dubrazkha Carolina
author Dalibón Bähler, Eugenia Laura
author_facet Dalibón Bähler, Eugenia Laura
Brühl, Sonia Patricia
Trava-Airoldi, Vladimir Jesús
Ramírez Ramos, Marco Antonio
Lugo González, Dubrazkha Carolina
author_role author
author2 Brühl, Sonia Patricia
Trava-Airoldi, Vladimir Jesús
Ramírez Ramos, Marco Antonio
Lugo González, Dubrazkha Carolina
author2_role author
author
author
author
dc.subject.none.fl_str_mv Recubrimiento DLC
Acero inoxidable
Silicio
topic Recubrimiento DLC
Acero inoxidable
Silicio
dc.description.none.fl_txt_mv The DLC coatings are characterized by good wear resistance, low friction coefficient and chemical inertness. However, they have adhesion problems when they are deposited on metallic substrates. For thisreason, a thin interlayer of different materials, such as silicon, is deposited previous to the coating in order to improve the adhesion. There are a few studies about the influence of the conditions of the silicon interlayer deposition on adhesion or properties of the coatings [2,3]. In this work, the adhesion of DLC coatings deposited on nitrided and non-nitrided martensitic stainless steel, modifying the silicon interlayer bias potential deposition, is studied.
Fil: Dalibón Bähler, Eugenia Laura. Universidad Tecnológica Nacional. Facultad Regional Concepción del Uruguay. Departamento Ingeniería Electromecánica. Grupo de Ingeniería de Superficies; Argentina.
Fil: Brühl, Sonia Patricia. Universidad Tecnológica Nacional. Facultad Regional Concepción del Uruguay. Departamento Ingeniería Electromecánica. Grupo de Ingeniería de Superficies; Argentina.
Fil: Trava-Airoldi, Vladimir Jesús. Ministério da Ciencia, Tecnologia e Innovacao. Instituto Nacional de Pesquisas Espaciais; Brasil.
Fil: Ramírez Ramos, Marco Antonio. Ministério da Ciencia, Tecnologia e Innovacao. Instituto Nacional de Pesquisas Espaciais; Brasil.
Fil: Lugo González, Dubrazkha Carolina. Ministério da Ciencia, Tecnologia e Innovacao. Instituto Nacional de Pesquisas Espaciais; Brasil.
description The DLC coatings are characterized by good wear resistance, low friction coefficient and chemical inertness. However, they have adhesion problems when they are deposited on metallic substrates. For thisreason, a thin interlayer of different materials, such as silicon, is deposited previous to the coating in order to improve the adhesion. There are a few studies about the influence of the conditions of the silicon interlayer deposition on adhesion or properties of the coatings [2,3]. In this work, the adhesion of DLC coatings deposited on nitrided and non-nitrided martensitic stainless steel, modifying the silicon interlayer bias potential deposition, is studied.
publishDate 2017
dc.date.none.fl_str_mv 2017-08-25
2019-11-11T14:58:12Z
2019-11-11T14:58:12Z
dc.type.none.fl_str_mv info:eu-repo/semantics/conferenceObject
info:eu-repo/semantics/publishedVersion
http://purl.org/coar/resource_type/c_5794
info:ar-repo/semantics/documentoDeConferencia
format conferenceObject
status_str publishedVersion
dc.identifier.none.fl_str_mv XXXVIII Congresso Brasileiro de Aplicações de Vácuo na Indústria e na Ciência (CBRAVIC)-III Workshop de Tratamento e Modificação de Superfícies (WTMS)(2017)
http://mtc-m21b.sid.inpe.br/col/sid.inpe.br/mtc-m21b/2017/08.29.16.15/doc/submissao_101.pdf
http://hdl.handle.net/20.500.12272/4145
identifier_str_mv XXXVIII Congresso Brasileiro de Aplicações de Vácuo na Indústria e na Ciência (CBRAVIC)-III Workshop de Tratamento e Modificação de Superfícies (WTMS)(2017)
url http://mtc-m21b.sid.inpe.br/col/sid.inpe.br/mtc-m21b/2017/08.29.16.15/doc/submissao_101.pdf
http://hdl.handle.net/20.500.12272/4145
dc.language.none.fl_str_mv eng
language eng
dc.rights.none.fl_str_mv info:eu-repo/semantics/openAccess
http://creativecommons.org/licenses/by-nc-nd/4.0/
Dalibón Bähler, Eugenia Laura ; Brühl, Sonia Patricia ; Lugo González, Dubrazkha Carlonina ; Trava-Airoldi, Vladimir Jesús ; Ramos Ramírez, Marco Antonio
No comercial con fines académicos
Attribution-NonCommercial-NoDerivatives 4.0 Internacional
eu_rights_str_mv openAccess
rights_invalid_str_mv http://creativecommons.org/licenses/by-nc-nd/4.0/
Dalibón Bähler, Eugenia Laura ; Brühl, Sonia Patricia ; Lugo González, Dubrazkha Carlonina ; Trava-Airoldi, Vladimir Jesús ; Ramos Ramírez, Marco Antonio
No comercial con fines académicos
Attribution-NonCommercial-NoDerivatives 4.0 Internacional
dc.format.none.fl_str_mv application/pdf
application/pdf
dc.source.none.fl_str_mv reponame:Repositorio Institucional Abierto (UTN)
instname:Universidad Tecnológica Nacional
reponame_str Repositorio Institucional Abierto (UTN)
collection Repositorio Institucional Abierto (UTN)
instname_str Universidad Tecnológica Nacional
repository.name.fl_str_mv Repositorio Institucional Abierto (UTN) - Universidad Tecnológica Nacional
repository.mail.fl_str_mv gestionria@rec.utn.edu.ar; fsuarez@rec.utn.edu.ar
_version_ 1842344355429351424
score 12.623145

Publicaciones similares