Entrance effect on the interfacial heat transfer and the thermal dispersion in laminar flows through porous media

Autores
Teruel, Federico Eduardo
Año de publicación
2016
Idioma
inglés
Tipo de recurso
artículo
Estado
versión publicada
Descripción
Macroscopic coefficients that are needed to complete porous media models, such as the thermal dispersion and the interfacial heat transfer, are in general calculated under thermally and hydrodynamically fully developed conditions. In this study, a laminar flow that thermally develops in a porous structure is simulated to analyze an aspect that has not been addressed in the literature, the entrance effect on the calculation of macroscopic coefficients. Specifically, the simulation of a microscopic steady laminar flow in a porous medium formed by staggered square cylinders with ReD = 1, 10 and 75, Péclet numbers in the 10-104 range, and porosities between 55 and 95% is presented. The domain simulated has been chosen large enough to allow the flow to thermally develop for large Péclet numbers. First, numerical solutions are space averaged to show that the application of the cellular average is preferred over the generally used volume average. Employing the cellular average, the interfacial heat transfer and the streamwise thermal dispersion are computed in the entire computational domain, from the inlet, where the flow is thermally developing, to the outlet, where fully developed conditions are achieved. Numerical computations for the interfacial heat transfer show a peak at the entrance that gradually decreases to a fully developed value. The value of the peak and the length of the developing region increases with the porosity and Péclet number. Therefore, it is concluded that for laminar flows and large Péclet numbers (>500), the assumption that the interfacial heat transfer is a constant defined by its fully developed value implies large errors in the calculation of the energy transferred between phases of the porous medium. The computation of the streamwise thermal dispersion shows the same developing region than that calculated for the interfacial heat transfer. In this region, this coefficient rises monotonically from zero to a fully developed value. Results show that the macroscopic modeling of laminar flows in ordered media cannot neglect the entrance effect for high porosities and large Péclet numbers.
Fil: Teruel, Federico Eduardo. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Comisión Nacional de Energía Atómica. Centro Atómico Bariloche; Argentina. Universidad Nacional de Cuyo; Argentina
Materia
Cellular Average
Macroscopic Energy Equation
Porous Media
Volume Average
Nivel de accesibilidad
acceso abierto
Condiciones de uso
https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
Repositorio
CONICET Digital (CONICET)
Institución
Consejo Nacional de Investigaciones Científicas y Técnicas
OAI Identificador
oai:ri.conicet.gov.ar:11336/59835

id CONICETDig_fc457a10044c7b24e8c14af9ff8f4ec3
oai_identifier_str oai:ri.conicet.gov.ar:11336/59835
network_acronym_str CONICETDig
repository_id_str 3498
network_name_str CONICET Digital (CONICET)
spelling Entrance effect on the interfacial heat transfer and the thermal dispersion in laminar flows through porous mediaTeruel, Federico EduardoCellular AverageMacroscopic Energy EquationPorous MediaVolume Averagehttps://purl.org/becyt/ford/1.3https://purl.org/becyt/ford/1Macroscopic coefficients that are needed to complete porous media models, such as the thermal dispersion and the interfacial heat transfer, are in general calculated under thermally and hydrodynamically fully developed conditions. In this study, a laminar flow that thermally develops in a porous structure is simulated to analyze an aspect that has not been addressed in the literature, the entrance effect on the calculation of macroscopic coefficients. Specifically, the simulation of a microscopic steady laminar flow in a porous medium formed by staggered square cylinders with ReD = 1, 10 and 75, Péclet numbers in the 10-104 range, and porosities between 55 and 95% is presented. The domain simulated has been chosen large enough to allow the flow to thermally develop for large Péclet numbers. First, numerical solutions are space averaged to show that the application of the cellular average is preferred over the generally used volume average. Employing the cellular average, the interfacial heat transfer and the streamwise thermal dispersion are computed in the entire computational domain, from the inlet, where the flow is thermally developing, to the outlet, where fully developed conditions are achieved. Numerical computations for the interfacial heat transfer show a peak at the entrance that gradually decreases to a fully developed value. The value of the peak and the length of the developing region increases with the porosity and Péclet number. Therefore, it is concluded that for laminar flows and large Péclet numbers (>500), the assumption that the interfacial heat transfer is a constant defined by its fully developed value implies large errors in the calculation of the energy transferred between phases of the porous medium. The computation of the streamwise thermal dispersion shows the same developing region than that calculated for the interfacial heat transfer. In this region, this coefficient rises monotonically from zero to a fully developed value. Results show that the macroscopic modeling of laminar flows in ordered media cannot neglect the entrance effect for high porosities and large Péclet numbers.Fil: Teruel, Federico Eduardo. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Comisión Nacional de Energía Atómica. Centro Atómico Bariloche; Argentina. Universidad Nacional de Cuyo; ArgentinaElsevier France-editions Scientifiques Medicales Elsevier2016-06info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionhttp://purl.org/coar/resource_type/c_6501info:ar-repo/semantics/articuloapplication/pdfapplication/pdfhttp://hdl.handle.net/11336/59835Teruel, Federico Eduardo; Entrance effect on the interfacial heat transfer and the thermal dispersion in laminar flows through porous media; Elsevier France-editions Scientifiques Medicales Elsevier; International Journal Of Thermal Sciences; 104; 6-2016; 172-1851290-0729CONICET DigitalCONICETenginfo:eu-repo/semantics/altIdentifier/doi/10.1016/j.ijthermalsci.2016.01.005info:eu-repo/semantics/altIdentifier/url/https://www.sciencedirect.com/science/article/pii/S129007291530048Xinfo:eu-repo/semantics/openAccesshttps://creativecommons.org/licenses/by-nc-sa/2.5/ar/reponame:CONICET Digital (CONICET)instname:Consejo Nacional de Investigaciones Científicas y Técnicas2025-10-22T11:02:14Zoai:ri.conicet.gov.ar:11336/59835instacron:CONICETInstitucionalhttp://ri.conicet.gov.ar/Organismo científico-tecnológicoNo correspondehttp://ri.conicet.gov.ar/oai/requestdasensio@conicet.gov.ar; lcarlino@conicet.gov.arArgentinaNo correspondeNo correspondeNo correspondeopendoar:34982025-10-22 11:02:15.173CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicasfalse
dc.title.none.fl_str_mv Entrance effect on the interfacial heat transfer and the thermal dispersion in laminar flows through porous media
title Entrance effect on the interfacial heat transfer and the thermal dispersion in laminar flows through porous media
spellingShingle Entrance effect on the interfacial heat transfer and the thermal dispersion in laminar flows through porous media
Teruel, Federico Eduardo
Cellular Average
Macroscopic Energy Equation
Porous Media
Volume Average
title_short Entrance effect on the interfacial heat transfer and the thermal dispersion in laminar flows through porous media
title_full Entrance effect on the interfacial heat transfer and the thermal dispersion in laminar flows through porous media
title_fullStr Entrance effect on the interfacial heat transfer and the thermal dispersion in laminar flows through porous media
title_full_unstemmed Entrance effect on the interfacial heat transfer and the thermal dispersion in laminar flows through porous media
title_sort Entrance effect on the interfacial heat transfer and the thermal dispersion in laminar flows through porous media
dc.creator.none.fl_str_mv Teruel, Federico Eduardo
author Teruel, Federico Eduardo
author_facet Teruel, Federico Eduardo
author_role author
dc.subject.none.fl_str_mv Cellular Average
Macroscopic Energy Equation
Porous Media
Volume Average
topic Cellular Average
Macroscopic Energy Equation
Porous Media
Volume Average
purl_subject.fl_str_mv https://purl.org/becyt/ford/1.3
https://purl.org/becyt/ford/1
dc.description.none.fl_txt_mv Macroscopic coefficients that are needed to complete porous media models, such as the thermal dispersion and the interfacial heat transfer, are in general calculated under thermally and hydrodynamically fully developed conditions. In this study, a laminar flow that thermally develops in a porous structure is simulated to analyze an aspect that has not been addressed in the literature, the entrance effect on the calculation of macroscopic coefficients. Specifically, the simulation of a microscopic steady laminar flow in a porous medium formed by staggered square cylinders with ReD = 1, 10 and 75, Péclet numbers in the 10-104 range, and porosities between 55 and 95% is presented. The domain simulated has been chosen large enough to allow the flow to thermally develop for large Péclet numbers. First, numerical solutions are space averaged to show that the application of the cellular average is preferred over the generally used volume average. Employing the cellular average, the interfacial heat transfer and the streamwise thermal dispersion are computed in the entire computational domain, from the inlet, where the flow is thermally developing, to the outlet, where fully developed conditions are achieved. Numerical computations for the interfacial heat transfer show a peak at the entrance that gradually decreases to a fully developed value. The value of the peak and the length of the developing region increases with the porosity and Péclet number. Therefore, it is concluded that for laminar flows and large Péclet numbers (>500), the assumption that the interfacial heat transfer is a constant defined by its fully developed value implies large errors in the calculation of the energy transferred between phases of the porous medium. The computation of the streamwise thermal dispersion shows the same developing region than that calculated for the interfacial heat transfer. In this region, this coefficient rises monotonically from zero to a fully developed value. Results show that the macroscopic modeling of laminar flows in ordered media cannot neglect the entrance effect for high porosities and large Péclet numbers.
Fil: Teruel, Federico Eduardo. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Comisión Nacional de Energía Atómica. Centro Atómico Bariloche; Argentina. Universidad Nacional de Cuyo; Argentina
description Macroscopic coefficients that are needed to complete porous media models, such as the thermal dispersion and the interfacial heat transfer, are in general calculated under thermally and hydrodynamically fully developed conditions. In this study, a laminar flow that thermally develops in a porous structure is simulated to analyze an aspect that has not been addressed in the literature, the entrance effect on the calculation of macroscopic coefficients. Specifically, the simulation of a microscopic steady laminar flow in a porous medium formed by staggered square cylinders with ReD = 1, 10 and 75, Péclet numbers in the 10-104 range, and porosities between 55 and 95% is presented. The domain simulated has been chosen large enough to allow the flow to thermally develop for large Péclet numbers. First, numerical solutions are space averaged to show that the application of the cellular average is preferred over the generally used volume average. Employing the cellular average, the interfacial heat transfer and the streamwise thermal dispersion are computed in the entire computational domain, from the inlet, where the flow is thermally developing, to the outlet, where fully developed conditions are achieved. Numerical computations for the interfacial heat transfer show a peak at the entrance that gradually decreases to a fully developed value. The value of the peak and the length of the developing region increases with the porosity and Péclet number. Therefore, it is concluded that for laminar flows and large Péclet numbers (>500), the assumption that the interfacial heat transfer is a constant defined by its fully developed value implies large errors in the calculation of the energy transferred between phases of the porous medium. The computation of the streamwise thermal dispersion shows the same developing region than that calculated for the interfacial heat transfer. In this region, this coefficient rises monotonically from zero to a fully developed value. Results show that the macroscopic modeling of laminar flows in ordered media cannot neglect the entrance effect for high porosities and large Péclet numbers.
publishDate 2016
dc.date.none.fl_str_mv 2016-06
dc.type.none.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
http://purl.org/coar/resource_type/c_6501
info:ar-repo/semantics/articulo
format article
status_str publishedVersion
dc.identifier.none.fl_str_mv http://hdl.handle.net/11336/59835
Teruel, Federico Eduardo; Entrance effect on the interfacial heat transfer and the thermal dispersion in laminar flows through porous media; Elsevier France-editions Scientifiques Medicales Elsevier; International Journal Of Thermal Sciences; 104; 6-2016; 172-185
1290-0729
CONICET Digital
CONICET
url http://hdl.handle.net/11336/59835
identifier_str_mv Teruel, Federico Eduardo; Entrance effect on the interfacial heat transfer and the thermal dispersion in laminar flows through porous media; Elsevier France-editions Scientifiques Medicales Elsevier; International Journal Of Thermal Sciences; 104; 6-2016; 172-185
1290-0729
CONICET Digital
CONICET
dc.language.none.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv info:eu-repo/semantics/altIdentifier/doi/10.1016/j.ijthermalsci.2016.01.005
info:eu-repo/semantics/altIdentifier/url/https://www.sciencedirect.com/science/article/pii/S129007291530048X
dc.rights.none.fl_str_mv info:eu-repo/semantics/openAccess
https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
eu_rights_str_mv openAccess
rights_invalid_str_mv https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
dc.format.none.fl_str_mv application/pdf
application/pdf
dc.publisher.none.fl_str_mv Elsevier France-editions Scientifiques Medicales Elsevier
publisher.none.fl_str_mv Elsevier France-editions Scientifiques Medicales Elsevier
dc.source.none.fl_str_mv reponame:CONICET Digital (CONICET)
instname:Consejo Nacional de Investigaciones Científicas y Técnicas
reponame_str CONICET Digital (CONICET)
collection CONICET Digital (CONICET)
instname_str Consejo Nacional de Investigaciones Científicas y Técnicas
repository.name.fl_str_mv CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicas
repository.mail.fl_str_mv dasensio@conicet.gov.ar; lcarlino@conicet.gov.ar
_version_ 1846781225319006208
score 12.982451