Composites made from lignocellulosics and thermoset polymers

Autores
Aranguren, Mirta Ines; Marcovich, Norma Esther; Reboredo, Maria Marta
Año de publicación
2006
Idioma
inglés
Tipo de recurso
artículo
Estado
versión publicada
Descripción
Composites made from a stryrene/unsaturated polyester thermoset matrix and woodflours from different wood species have been prepared and tested. Pine (Pino Eliottis), eucaliptus (Eucaliptus Saligna) and marmelero (Ruprechia Laxiflora), a softwood and two semihard woods respectively, were selected for this study because of the availability and local abundance. The particles were used untreated and chemically modified with maleic anhydride (MAN). Thermogravimetric analysis and analytical techniques were used in the characterization of untreated and treated flours. Dispersion of the fibrous particles, as well as maximum filler concentration (accompanied by complete wetting of the wood fibers) was dependent on the treatment and on the wood species utilized. Bending and compression tests indicated some improvement in the performance of the composites, if the woodflour was previously esterified. Scanning electron microscopy (SEM) allowed to observe changes in the fracture surfaces due to MAN treatment of the fibers. Keywords: lignocellulosics; thermosets; woodflours; chemical modifications; composites; mechanical properties.
Fil: Aranguren, Mirta Ines. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; Argentina
Fil: Marcovich, Norma Esther. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; Argentina
Fil: Reboredo, Maria Marta. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; Argentina
Materia
Lignocellulosics
Thermosets
Woodflours
Chemical modifications
Composites
Mechanical properties
Nivel de accesibilidad
acceso abierto
Condiciones de uso
https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
Repositorio
CONICET Digital (CONICET)
Institución
Consejo Nacional de Investigaciones Científicas y Técnicas
OAI Identificador
oai:ri.conicet.gov.ar:11336/36295
Acceder
id CONICETDig_f7d094c53649b733b1b72ae7c8080fee
oai_identifier_str oai:ri.conicet.gov.ar:11336/36295
network_acronym_str CONICETDig
repository_id_str 3498
network_name_str CONICET Digital (CONICET)
spelling Composites made from lignocellulosics and thermoset polymersAranguren, Mirta InesMarcovich, Norma EstherReboredo, Maria MartaLignocellulosicsThermosetsWoodfloursChemical modificationsCompositesMechanical propertieshttps://purl.org/becyt/ford/2.4https://purl.org/becyt/ford/2Composites made from a stryrene/unsaturated polyester thermoset matrix and woodflours from different wood species have been prepared and tested. Pine (Pino Eliottis), eucaliptus (Eucaliptus Saligna) and marmelero (Ruprechia Laxiflora), a softwood and two semihard woods respectively, were selected for this study because of the availability and local abundance. The particles were used untreated and chemically modified with maleic anhydride (MAN). Thermogravimetric analysis and analytical techniques were used in the characterization of untreated and treated flours. Dispersion of the fibrous particles, as well as maximum filler concentration (accompanied by complete wetting of the wood fibers) was dependent on the treatment and on the wood species utilized. Bending and compression tests indicated some improvement in the performance of the composites, if the woodflour was previously esterified. Scanning electron microscopy (SEM) allowed to observe changes in the fracture surfaces due to MAN treatment of the fibers. Keywords: lignocellulosics; thermosets; woodflours; chemical modifications; composites; mechanical properties.Fil: Aranguren, Mirta Ines. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaFil: Marcovich, Norma Esther. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaFil: Reboredo, Maria Marta. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaGordon Breach Publishing2006-09-24info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionhttp://purl.org/coar/resource_type/c_6501info:ar-repo/semantics/articuloapplication/pdfapplication/pdfhttp://hdl.handle.net/11336/36295Aranguren, Mirta Ines; Marcovich, Norma Esther; Reboredo, Maria Marta; Composites made from lignocellulosics and thermoset polymers; Gordon Breach Publishing; Molecular Crystals And Liquid Crystals Science And Technology, Section A; 353; 1; 24-9-2006; 95-1081542-14061563-5287CONICET DigitalCONICETenginfo:eu-repo/semantics/altIdentifier/doi/10.1080/10587250008025651info:eu-repo/semantics/altIdentifier/url/http://www.tandfonline.com/doi/abs/10.1080/10587250008025651?journalCode=gmcl19info:eu-repo/semantics/openAccesshttps://creativecommons.org/licenses/by-nc-sa/2.5/ar/reponame:CONICET Digital (CONICET)instname:Consejo Nacional de Investigaciones Científicas y Técnicas2025-09-29T09:57:20Zoai:ri.conicet.gov.ar:11336/36295instacron:CONICETInstitucionalhttp://ri.conicet.gov.ar/Organismo científico-tecnológicoNo correspondehttp://ri.conicet.gov.ar/oai/requestdasensio@conicet.gov.ar; lcarlino@conicet.gov.arArgentinaNo correspondeNo correspondeNo correspondeopendoar:34982025-09-29 09:57:21.075CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicasfalse
dc.title.none.fl_str_mv Composites made from lignocellulosics and thermoset polymers
title Composites made from lignocellulosics and thermoset polymers
spellingShingle Composites made from lignocellulosics and thermoset polymers
Aranguren, Mirta Ines
Lignocellulosics
Thermosets
Woodflours
Chemical modifications
Composites
Mechanical properties
title_short Composites made from lignocellulosics and thermoset polymers
title_full Composites made from lignocellulosics and thermoset polymers
title_fullStr Composites made from lignocellulosics and thermoset polymers
title_full_unstemmed Composites made from lignocellulosics and thermoset polymers
title_sort Composites made from lignocellulosics and thermoset polymers
dc.creator.none.fl_str_mv Aranguren, Mirta Ines
Marcovich, Norma Esther
Reboredo, Maria Marta
author Aranguren, Mirta Ines
author_facet Aranguren, Mirta Ines
Marcovich, Norma Esther
Reboredo, Maria Marta
author_role author
author2 Marcovich, Norma Esther
Reboredo, Maria Marta
author2_role author
author
dc.subject.none.fl_str_mv Lignocellulosics
Thermosets
Woodflours
Chemical modifications
Composites
Mechanical properties
topic Lignocellulosics
Thermosets
Woodflours
Chemical modifications
Composites
Mechanical properties
purl_subject.fl_str_mv https://purl.org/becyt/ford/2.4
https://purl.org/becyt/ford/2
dc.description.none.fl_txt_mv Composites made from a stryrene/unsaturated polyester thermoset matrix and woodflours from different wood species have been prepared and tested. Pine (Pino Eliottis), eucaliptus (Eucaliptus Saligna) and marmelero (Ruprechia Laxiflora), a softwood and two semihard woods respectively, were selected for this study because of the availability and local abundance. The particles were used untreated and chemically modified with maleic anhydride (MAN). Thermogravimetric analysis and analytical techniques were used in the characterization of untreated and treated flours. Dispersion of the fibrous particles, as well as maximum filler concentration (accompanied by complete wetting of the wood fibers) was dependent on the treatment and on the wood species utilized. Bending and compression tests indicated some improvement in the performance of the composites, if the woodflour was previously esterified. Scanning electron microscopy (SEM) allowed to observe changes in the fracture surfaces due to MAN treatment of the fibers. Keywords: lignocellulosics; thermosets; woodflours; chemical modifications; composites; mechanical properties.
Fil: Aranguren, Mirta Ines. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; Argentina
Fil: Marcovich, Norma Esther. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; Argentina
Fil: Reboredo, Maria Marta. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; Argentina
description Composites made from a stryrene/unsaturated polyester thermoset matrix and woodflours from different wood species have been prepared and tested. Pine (Pino Eliottis), eucaliptus (Eucaliptus Saligna) and marmelero (Ruprechia Laxiflora), a softwood and two semihard woods respectively, were selected for this study because of the availability and local abundance. The particles were used untreated and chemically modified with maleic anhydride (MAN). Thermogravimetric analysis and analytical techniques were used in the characterization of untreated and treated flours. Dispersion of the fibrous particles, as well as maximum filler concentration (accompanied by complete wetting of the wood fibers) was dependent on the treatment and on the wood species utilized. Bending and compression tests indicated some improvement in the performance of the composites, if the woodflour was previously esterified. Scanning electron microscopy (SEM) allowed to observe changes in the fracture surfaces due to MAN treatment of the fibers. Keywords: lignocellulosics; thermosets; woodflours; chemical modifications; composites; mechanical properties.
publishDate 2006
dc.date.none.fl_str_mv 2006-09-24
dc.type.none.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
http://purl.org/coar/resource_type/c_6501
info:ar-repo/semantics/articulo
format article
status_str publishedVersion
dc.identifier.none.fl_str_mv http://hdl.handle.net/11336/36295
Aranguren, Mirta Ines; Marcovich, Norma Esther; Reboredo, Maria Marta; Composites made from lignocellulosics and thermoset polymers; Gordon Breach Publishing; Molecular Crystals And Liquid Crystals Science And Technology, Section A; 353; 1; 24-9-2006; 95-108
1542-1406
1563-5287
CONICET Digital
CONICET
url http://hdl.handle.net/11336/36295
identifier_str_mv Aranguren, Mirta Ines; Marcovich, Norma Esther; Reboredo, Maria Marta; Composites made from lignocellulosics and thermoset polymers; Gordon Breach Publishing; Molecular Crystals And Liquid Crystals Science And Technology, Section A; 353; 1; 24-9-2006; 95-108
1542-1406
1563-5287
CONICET Digital
CONICET
dc.language.none.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv info:eu-repo/semantics/altIdentifier/doi/10.1080/10587250008025651
info:eu-repo/semantics/altIdentifier/url/http://www.tandfonline.com/doi/abs/10.1080/10587250008025651?journalCode=gmcl19
dc.rights.none.fl_str_mv info:eu-repo/semantics/openAccess
https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
eu_rights_str_mv openAccess
rights_invalid_str_mv https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
dc.format.none.fl_str_mv application/pdf
application/pdf
dc.publisher.none.fl_str_mv Gordon Breach Publishing
publisher.none.fl_str_mv Gordon Breach Publishing
dc.source.none.fl_str_mv reponame:CONICET Digital (CONICET)
instname:Consejo Nacional de Investigaciones Científicas y Técnicas
reponame_str CONICET Digital (CONICET)
collection CONICET Digital (CONICET)
instname_str Consejo Nacional de Investigaciones Científicas y Técnicas
repository.name.fl_str_mv CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicas
repository.mail.fl_str_mv dasensio@conicet.gov.ar; lcarlino@conicet.gov.ar
_version_ 1844613716041007104
score 13.070432

Publicaciones similares