Determination of characteristic strength and stiffness values in glued laminated beams of Argentinean Eucalyptus grandis according to European standards

Autores
Piter, Juan Carlos Jesús; Cotrina, A.D.; Sosa Zitto, Maria Alexandra; Stefani, Pablo Marcelo; Torrano, María Andrea
Año de publicación
2007
Idioma
inglés
Tipo de recurso
artículo
Estado
versión publicada
Descripción
The present paper reports the results of an investigation regarding the determination of characteristic strength and stiffness values in glued laminated beams of fast-growth Argentinean Eucalyptus grandis according to the criteria established in European standards. An empirical research project with 100 beams in structural sizes and 191 finger-jointed laminations was carried out. Test results allow to analyse the mechanical property values of this glued laminated timber in comparison with those adopted by the strength class system established in the European standard EN 1194 (1999), and they reveal a very high ratio of modulus of elasticity to density. Test results were also compared with values obtained by means of the equations provided by EN 1194 (1999). The effectiveness of the criteria established in this European standard for determining mechanical properties in beams of this deciduous species is analysed through the discussion of test results and those obtained from calculations based on lamination properties. © 2006 Springer-Verlag.
Fil: Piter, Juan Carlos Jesús. Universidad Tecnológica Nacional. Facultad Regional Concepción del Uruguay. Departamento de Ingeniería Civil; Argentina
Fil: Cotrina, A.D.. Universidad Tecnológica Nacional. Facultad Regional Concepción del Uruguay. Departamento de Ingeniería Civil; Argentina
Fil: Sosa Zitto, Maria Alexandra. Universidad Tecnológica Nacional. Facultad Regional Concepción del Uruguay. Departamento de Ingeniería Civil; Argentina
Fil: Stefani, Pablo Marcelo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; Argentina. Universidad Tecnológica Nacional. Facultad Regional Concepción del Uruguay. Departamento de Ingeniería Civil; Argentina
Fil: Torrano, María Andrea. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Universidad Tecnológica Nacional. Facultad Regional Concepción del Uruguay. Departamento de Ingeniería Civil; Argentina
Materia
Glued Laminated Beams
Eucalytptus Grandis
Strenght
Nivel de accesibilidad
acceso abierto
Condiciones de uso
https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
Repositorio
CONICET Digital (CONICET)
Institución
Consejo Nacional de Investigaciones Científicas y Técnicas
OAI Identificador
oai:ri.conicet.gov.ar:11336/72290
Acceder
id CONICETDig_e63c99f2ebc7c002314d620c30784853
oai_identifier_str oai:ri.conicet.gov.ar:11336/72290
network_acronym_str CONICETDig
repository_id_str 3498
network_name_str CONICET Digital (CONICET)
spelling Determination of characteristic strength and stiffness values in glued laminated beams of Argentinean Eucalyptus grandis according to European standardsPiter, Juan Carlos JesúsCotrina, A.D.Sosa Zitto, Maria AlexandraStefani, Pablo MarceloTorrano, María AndreaGlued Laminated BeamsEucalytptus GrandisStrenghtThe present paper reports the results of an investigation regarding the determination of characteristic strength and stiffness values in glued laminated beams of fast-growth Argentinean Eucalyptus grandis according to the criteria established in European standards. An empirical research project with 100 beams in structural sizes and 191 finger-jointed laminations was carried out. Test results allow to analyse the mechanical property values of this glued laminated timber in comparison with those adopted by the strength class system established in the European standard EN 1194 (1999), and they reveal a very high ratio of modulus of elasticity to density. Test results were also compared with values obtained by means of the equations provided by EN 1194 (1999). The effectiveness of the criteria established in this European standard for determining mechanical properties in beams of this deciduous species is analysed through the discussion of test results and those obtained from calculations based on lamination properties. © 2006 Springer-Verlag.Fil: Piter, Juan Carlos Jesús. Universidad Tecnológica Nacional. Facultad Regional Concepción del Uruguay. Departamento de Ingeniería Civil; ArgentinaFil: Cotrina, A.D.. Universidad Tecnológica Nacional. Facultad Regional Concepción del Uruguay. Departamento de Ingeniería Civil; ArgentinaFil: Sosa Zitto, Maria Alexandra. Universidad Tecnológica Nacional. Facultad Regional Concepción del Uruguay. Departamento de Ingeniería Civil; ArgentinaFil: Stefani, Pablo Marcelo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; Argentina. Universidad Tecnológica Nacional. Facultad Regional Concepción del Uruguay. Departamento de Ingeniería Civil; ArgentinaFil: Torrano, María Andrea. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Universidad Tecnológica Nacional. Facultad Regional Concepción del Uruguay. Departamento de Ingeniería Civil; ArgentinaSpringer2007-08info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionhttp://purl.org/coar/resource_type/c_6501info:ar-repo/semantics/articuloapplication/pdfapplication/pdfhttp://hdl.handle.net/11336/72290Piter, Juan Carlos Jesús; Cotrina, A.D.; Sosa Zitto, Maria Alexandra; Stefani, Pablo Marcelo; Torrano, María Andrea; Determination of characteristic strength and stiffness values in glued laminated beams of Argentinean Eucalyptus grandis according to European standards; Springer; European Journal Of Wood And Wood Products; 65; 4; 8-2007; 261-2660018-3768CONICET DigitalCONICETenginfo:eu-repo/semantics/altIdentifier/url/https://link.springer.com/article/10.1007/s00107-006-0161-5info:eu-repo/semantics/altIdentifier/doi/10.1007/s00107-006-0161-5info:eu-repo/semantics/openAccesshttps://creativecommons.org/licenses/by-nc-sa/2.5/ar/reponame:CONICET Digital (CONICET)instname:Consejo Nacional de Investigaciones Científicas y Técnicas2025-09-29T09:56:02Zoai:ri.conicet.gov.ar:11336/72290instacron:CONICETInstitucionalhttp://ri.conicet.gov.ar/Organismo científico-tecnológicoNo correspondehttp://ri.conicet.gov.ar/oai/requestdasensio@conicet.gov.ar; lcarlino@conicet.gov.arArgentinaNo correspondeNo correspondeNo correspondeopendoar:34982025-09-29 09:56:02.505CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicasfalse
dc.title.none.fl_str_mv Determination of characteristic strength and stiffness values in glued laminated beams of Argentinean Eucalyptus grandis according to European standards
title Determination of characteristic strength and stiffness values in glued laminated beams of Argentinean Eucalyptus grandis according to European standards
spellingShingle Determination of characteristic strength and stiffness values in glued laminated beams of Argentinean Eucalyptus grandis according to European standards
Piter, Juan Carlos Jesús
Glued Laminated Beams
Eucalytptus Grandis
Strenght
title_short Determination of characteristic strength and stiffness values in glued laminated beams of Argentinean Eucalyptus grandis according to European standards
title_full Determination of characteristic strength and stiffness values in glued laminated beams of Argentinean Eucalyptus grandis according to European standards
title_fullStr Determination of characteristic strength and stiffness values in glued laminated beams of Argentinean Eucalyptus grandis according to European standards
title_full_unstemmed Determination of characteristic strength and stiffness values in glued laminated beams of Argentinean Eucalyptus grandis according to European standards
title_sort Determination of characteristic strength and stiffness values in glued laminated beams of Argentinean Eucalyptus grandis according to European standards
dc.creator.none.fl_str_mv Piter, Juan Carlos Jesús
Cotrina, A.D.
Sosa Zitto, Maria Alexandra
Stefani, Pablo Marcelo
Torrano, María Andrea
author Piter, Juan Carlos Jesús
author_facet Piter, Juan Carlos Jesús
Cotrina, A.D.
Sosa Zitto, Maria Alexandra
Stefani, Pablo Marcelo
Torrano, María Andrea
author_role author
author2 Cotrina, A.D.
Sosa Zitto, Maria Alexandra
Stefani, Pablo Marcelo
Torrano, María Andrea
author2_role author
author
author
author
dc.subject.none.fl_str_mv Glued Laminated Beams
Eucalytptus Grandis
Strenght
topic Glued Laminated Beams
Eucalytptus Grandis
Strenght
dc.description.none.fl_txt_mv The present paper reports the results of an investigation regarding the determination of characteristic strength and stiffness values in glued laminated beams of fast-growth Argentinean Eucalyptus grandis according to the criteria established in European standards. An empirical research project with 100 beams in structural sizes and 191 finger-jointed laminations was carried out. Test results allow to analyse the mechanical property values of this glued laminated timber in comparison with those adopted by the strength class system established in the European standard EN 1194 (1999), and they reveal a very high ratio of modulus of elasticity to density. Test results were also compared with values obtained by means of the equations provided by EN 1194 (1999). The effectiveness of the criteria established in this European standard for determining mechanical properties in beams of this deciduous species is analysed through the discussion of test results and those obtained from calculations based on lamination properties. © 2006 Springer-Verlag.
Fil: Piter, Juan Carlos Jesús. Universidad Tecnológica Nacional. Facultad Regional Concepción del Uruguay. Departamento de Ingeniería Civil; Argentina
Fil: Cotrina, A.D.. Universidad Tecnológica Nacional. Facultad Regional Concepción del Uruguay. Departamento de Ingeniería Civil; Argentina
Fil: Sosa Zitto, Maria Alexandra. Universidad Tecnológica Nacional. Facultad Regional Concepción del Uruguay. Departamento de Ingeniería Civil; Argentina
Fil: Stefani, Pablo Marcelo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; Argentina. Universidad Tecnológica Nacional. Facultad Regional Concepción del Uruguay. Departamento de Ingeniería Civil; Argentina
Fil: Torrano, María Andrea. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Universidad Tecnológica Nacional. Facultad Regional Concepción del Uruguay. Departamento de Ingeniería Civil; Argentina
description The present paper reports the results of an investigation regarding the determination of characteristic strength and stiffness values in glued laminated beams of fast-growth Argentinean Eucalyptus grandis according to the criteria established in European standards. An empirical research project with 100 beams in structural sizes and 191 finger-jointed laminations was carried out. Test results allow to analyse the mechanical property values of this glued laminated timber in comparison with those adopted by the strength class system established in the European standard EN 1194 (1999), and they reveal a very high ratio of modulus of elasticity to density. Test results were also compared with values obtained by means of the equations provided by EN 1194 (1999). The effectiveness of the criteria established in this European standard for determining mechanical properties in beams of this deciduous species is analysed through the discussion of test results and those obtained from calculations based on lamination properties. © 2006 Springer-Verlag.
publishDate 2007
dc.date.none.fl_str_mv 2007-08
dc.type.none.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
http://purl.org/coar/resource_type/c_6501
info:ar-repo/semantics/articulo
format article
status_str publishedVersion
dc.identifier.none.fl_str_mv http://hdl.handle.net/11336/72290
Piter, Juan Carlos Jesús; Cotrina, A.D.; Sosa Zitto, Maria Alexandra; Stefani, Pablo Marcelo; Torrano, María Andrea; Determination of characteristic strength and stiffness values in glued laminated beams of Argentinean Eucalyptus grandis according to European standards; Springer; European Journal Of Wood And Wood Products; 65; 4; 8-2007; 261-266
0018-3768
CONICET Digital
CONICET
url http://hdl.handle.net/11336/72290
identifier_str_mv Piter, Juan Carlos Jesús; Cotrina, A.D.; Sosa Zitto, Maria Alexandra; Stefani, Pablo Marcelo; Torrano, María Andrea; Determination of characteristic strength and stiffness values in glued laminated beams of Argentinean Eucalyptus grandis according to European standards; Springer; European Journal Of Wood And Wood Products; 65; 4; 8-2007; 261-266
0018-3768
CONICET Digital
CONICET
dc.language.none.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv info:eu-repo/semantics/altIdentifier/url/https://link.springer.com/article/10.1007/s00107-006-0161-5
info:eu-repo/semantics/altIdentifier/doi/10.1007/s00107-006-0161-5
dc.rights.none.fl_str_mv info:eu-repo/semantics/openAccess
https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
eu_rights_str_mv openAccess
rights_invalid_str_mv https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
dc.format.none.fl_str_mv application/pdf
application/pdf
dc.publisher.none.fl_str_mv Springer
publisher.none.fl_str_mv Springer
dc.source.none.fl_str_mv reponame:CONICET Digital (CONICET)
instname:Consejo Nacional de Investigaciones Científicas y Técnicas
reponame_str CONICET Digital (CONICET)
collection CONICET Digital (CONICET)
instname_str Consejo Nacional de Investigaciones Científicas y Técnicas
repository.name.fl_str_mv CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicas
repository.mail.fl_str_mv dasensio@conicet.gov.ar; lcarlino@conicet.gov.ar
_version_ 1844613685671100416
score 13.070432

Publicaciones similares