Detection and isolation of faults on the rotor side converter of doubly fed induction generators

Autores
González, Guillermo Noel; de Angelo, Cristian Hernan; Forchetti, Daniel Gustavo; Aligia, Diego Andrés
Año de publicación
2018
Idioma
español castellano
Tipo de recurso
artículo
Estado
versión publicada
Descripción
This article presents a fault diagnosis strategy for open switch faults in the rotor side converter of doubly fed induction generators. The proposed strategy uses state observers based on dynamic models obtained from an approach based on differential geometry. These observers allow the generation of residue signals that are sensitive to each fault and insensitive to disturbances. From these signals a residual vector is constructed with information that can be used for the detection and isolation of the fault. The detection strategy consists of evaluating the envelope of the module of the residual vector. Isolation requires evaluating the region of the plane described by the residual vector and comparing that region with the one associated with each fault scenario. Finally, results are presented where it is demonstrated that the proposal allows to detect, isolate and identify open switch faults, both single and multiple, even against parametric errors and other disturbances.
Fil: González, Guillermo Noel. Universidad Nacional de Río Cuarto. Facultad de Ingeniería. Grupo de Electrónica Aplicada; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba; Argentina
Fil: de Angelo, Cristian Hernan. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba; Argentina. Universidad Nacional de Río Cuarto. Facultad de Ingeniería. Grupo de Electrónica Aplicada; Argentina
Fil: Forchetti, Daniel Gustavo. Universidad Nacional de Río Cuarto. Facultad de Ingeniería. Grupo de Electrónica Aplicada; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba; Argentina
Fil: Aligia, Diego Andrés. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba; Argentina. Universidad Nacional de Río Cuarto. Facultad de Ingeniería. Grupo de Electrónica Aplicada; Argentina
Materia
DOUBLY FED INDUCTION GENERATOR
FAULT DIAGNOSIS
FAULT SCENARIO
OBSERVERS
OPEN SWITCH FAULT
ROTOR SIDE CONVERTER
Nivel de accesibilidad
acceso abierto
Condiciones de uso
https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
Repositorio
CONICET Digital (CONICET)
Institución
Consejo Nacional de Investigaciones Científicas y Técnicas
OAI Identificador
oai:ri.conicet.gov.ar:11336/92241
Acceder
id CONICETDig_d1b26de1ca4a779284da29aad50528cd
oai_identifier_str oai:ri.conicet.gov.ar:11336/92241
network_acronym_str CONICETDig
repository_id_str 3498
network_name_str CONICET Digital (CONICET)
spelling Detection and isolation of faults on the rotor side converter of doubly fed induction generatorsDiagnóstico de fallas en el convertidor del rotor en generadores de inducción con rotor bobinadoGonzález, Guillermo Noelde Angelo, Cristian HernanForchetti, Daniel GustavoAligia, Diego AndrésDOUBLY FED INDUCTION GENERATORFAULT DIAGNOSISFAULT SCENARIOOBSERVERSOPEN SWITCH FAULTROTOR SIDE CONVERTERhttps://purl.org/becyt/ford/2.2https://purl.org/becyt/ford/2This article presents a fault diagnosis strategy for open switch faults in the rotor side converter of doubly fed induction generators. The proposed strategy uses state observers based on dynamic models obtained from an approach based on differential geometry. These observers allow the generation of residue signals that are sensitive to each fault and insensitive to disturbances. From these signals a residual vector is constructed with information that can be used for the detection and isolation of the fault. The detection strategy consists of evaluating the envelope of the module of the residual vector. Isolation requires evaluating the region of the plane described by the residual vector and comparing that region with the one associated with each fault scenario. Finally, results are presented where it is demonstrated that the proposal allows to detect, isolate and identify open switch faults, both single and multiple, even against parametric errors and other disturbances.Fil: González, Guillermo Noel. Universidad Nacional de Río Cuarto. Facultad de Ingeniería. Grupo de Electrónica Aplicada; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba; ArgentinaFil: de Angelo, Cristian Hernan. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba; Argentina. Universidad Nacional de Río Cuarto. Facultad de Ingeniería. Grupo de Electrónica Aplicada; ArgentinaFil: Forchetti, Daniel Gustavo. Universidad Nacional de Río Cuarto. Facultad de Ingeniería. Grupo de Electrónica Aplicada; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba; ArgentinaFil: Aligia, Diego Andrés. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba; Argentina. Universidad Nacional de Río Cuarto. Facultad de Ingeniería. Grupo de Electrónica Aplicada; ArgentinaComite Espanol Automatica Cea2018-01info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionhttp://purl.org/coar/resource_type/c_6501info:ar-repo/semantics/articuloapplication/pdfapplication/pdfhttp://hdl.handle.net/11336/92241González, Guillermo Noel; de Angelo, Cristian Hernan; Forchetti, Daniel Gustavo; Aligia, Diego Andrés; Detection and isolation of faults on the rotor side converter of doubly fed induction generators; Comite Espanol Automatica Cea; Revista Iberoamericana de Automática e Informática Industrial; 15; 3; 1-2018; 297-3081697-79121697-7920CONICET DigitalCONICETspainfo:eu-repo/semantics/altIdentifier/doi/10.4995/riai.2017.9042info:eu-repo/semantics/openAccesshttps://creativecommons.org/licenses/by-nc-sa/2.5/ar/reponame:CONICET Digital (CONICET)instname:Consejo Nacional de Investigaciones Científicas y Técnicas2025-09-03T10:03:08Zoai:ri.conicet.gov.ar:11336/92241instacron:CONICETInstitucionalhttp://ri.conicet.gov.ar/Organismo científico-tecnológicoNo correspondehttp://ri.conicet.gov.ar/oai/requestdasensio@conicet.gov.ar; lcarlino@conicet.gov.arArgentinaNo correspondeNo correspondeNo correspondeopendoar:34982025-09-03 10:03:08.731CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicasfalse
dc.title.none.fl_str_mv Detection and isolation of faults on the rotor side converter of doubly fed induction generators
Diagnóstico de fallas en el convertidor del rotor en generadores de inducción con rotor bobinado
title Detection and isolation of faults on the rotor side converter of doubly fed induction generators
spellingShingle Detection and isolation of faults on the rotor side converter of doubly fed induction generators
González, Guillermo Noel
DOUBLY FED INDUCTION GENERATOR
FAULT DIAGNOSIS
FAULT SCENARIO
OBSERVERS
OPEN SWITCH FAULT
ROTOR SIDE CONVERTER
title_short Detection and isolation of faults on the rotor side converter of doubly fed induction generators
title_full Detection and isolation of faults on the rotor side converter of doubly fed induction generators
title_fullStr Detection and isolation of faults on the rotor side converter of doubly fed induction generators
title_full_unstemmed Detection and isolation of faults on the rotor side converter of doubly fed induction generators
title_sort Detection and isolation of faults on the rotor side converter of doubly fed induction generators
dc.creator.none.fl_str_mv González, Guillermo Noel
de Angelo, Cristian Hernan
Forchetti, Daniel Gustavo
Aligia, Diego Andrés
author González, Guillermo Noel
author_facet González, Guillermo Noel
de Angelo, Cristian Hernan
Forchetti, Daniel Gustavo
Aligia, Diego Andrés
author_role author
author2 de Angelo, Cristian Hernan
Forchetti, Daniel Gustavo
Aligia, Diego Andrés
author2_role author
author
author
dc.subject.none.fl_str_mv DOUBLY FED INDUCTION GENERATOR
FAULT DIAGNOSIS
FAULT SCENARIO
OBSERVERS
OPEN SWITCH FAULT
ROTOR SIDE CONVERTER
topic DOUBLY FED INDUCTION GENERATOR
FAULT DIAGNOSIS
FAULT SCENARIO
OBSERVERS
OPEN SWITCH FAULT
ROTOR SIDE CONVERTER
purl_subject.fl_str_mv https://purl.org/becyt/ford/2.2
https://purl.org/becyt/ford/2
dc.description.none.fl_txt_mv This article presents a fault diagnosis strategy for open switch faults in the rotor side converter of doubly fed induction generators. The proposed strategy uses state observers based on dynamic models obtained from an approach based on differential geometry. These observers allow the generation of residue signals that are sensitive to each fault and insensitive to disturbances. From these signals a residual vector is constructed with information that can be used for the detection and isolation of the fault. The detection strategy consists of evaluating the envelope of the module of the residual vector. Isolation requires evaluating the region of the plane described by the residual vector and comparing that region with the one associated with each fault scenario. Finally, results are presented where it is demonstrated that the proposal allows to detect, isolate and identify open switch faults, both single and multiple, even against parametric errors and other disturbances.
Fil: González, Guillermo Noel. Universidad Nacional de Río Cuarto. Facultad de Ingeniería. Grupo de Electrónica Aplicada; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba; Argentina
Fil: de Angelo, Cristian Hernan. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba; Argentina. Universidad Nacional de Río Cuarto. Facultad de Ingeniería. Grupo de Electrónica Aplicada; Argentina
Fil: Forchetti, Daniel Gustavo. Universidad Nacional de Río Cuarto. Facultad de Ingeniería. Grupo de Electrónica Aplicada; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba; Argentina
Fil: Aligia, Diego Andrés. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba; Argentina. Universidad Nacional de Río Cuarto. Facultad de Ingeniería. Grupo de Electrónica Aplicada; Argentina
description This article presents a fault diagnosis strategy for open switch faults in the rotor side converter of doubly fed induction generators. The proposed strategy uses state observers based on dynamic models obtained from an approach based on differential geometry. These observers allow the generation of residue signals that are sensitive to each fault and insensitive to disturbances. From these signals a residual vector is constructed with information that can be used for the detection and isolation of the fault. The detection strategy consists of evaluating the envelope of the module of the residual vector. Isolation requires evaluating the region of the plane described by the residual vector and comparing that region with the one associated with each fault scenario. Finally, results are presented where it is demonstrated that the proposal allows to detect, isolate and identify open switch faults, both single and multiple, even against parametric errors and other disturbances.
publishDate 2018
dc.date.none.fl_str_mv 2018-01
dc.type.none.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
http://purl.org/coar/resource_type/c_6501
info:ar-repo/semantics/articulo
format article
status_str publishedVersion
dc.identifier.none.fl_str_mv http://hdl.handle.net/11336/92241
González, Guillermo Noel; de Angelo, Cristian Hernan; Forchetti, Daniel Gustavo; Aligia, Diego Andrés; Detection and isolation of faults on the rotor side converter of doubly fed induction generators; Comite Espanol Automatica Cea; Revista Iberoamericana de Automática e Informática Industrial; 15; 3; 1-2018; 297-308
1697-7912
1697-7920
CONICET Digital
CONICET
url http://hdl.handle.net/11336/92241
identifier_str_mv González, Guillermo Noel; de Angelo, Cristian Hernan; Forchetti, Daniel Gustavo; Aligia, Diego Andrés; Detection and isolation of faults on the rotor side converter of doubly fed induction generators; Comite Espanol Automatica Cea; Revista Iberoamericana de Automática e Informática Industrial; 15; 3; 1-2018; 297-308
1697-7912
1697-7920
CONICET Digital
CONICET
dc.language.none.fl_str_mv spa
language spa
dc.relation.none.fl_str_mv info:eu-repo/semantics/altIdentifier/doi/10.4995/riai.2017.9042
dc.rights.none.fl_str_mv info:eu-repo/semantics/openAccess
https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
eu_rights_str_mv openAccess
rights_invalid_str_mv https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
dc.format.none.fl_str_mv application/pdf
application/pdf
dc.publisher.none.fl_str_mv Comite Espanol Automatica Cea
publisher.none.fl_str_mv Comite Espanol Automatica Cea
dc.source.none.fl_str_mv reponame:CONICET Digital (CONICET)
instname:Consejo Nacional de Investigaciones Científicas y Técnicas
reponame_str CONICET Digital (CONICET)
collection CONICET Digital (CONICET)
instname_str Consejo Nacional de Investigaciones Científicas y Técnicas
repository.name.fl_str_mv CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicas
repository.mail.fl_str_mv dasensio@conicet.gov.ar; lcarlino@conicet.gov.ar
_version_ 1842269783934894080
score 13.13397

Publicaciones similares