Measurement of friction phenomena on silo walls made of corrugated steel

Autores
Fuentes, Jose María; Pinilla, Adriano; Madrid, Marcos Andres; Wiącek, Joanna; Ayuga Téllez, Esperanza; Ayuga, Francisco; Gallego, Eutiquio
Año de publicación
2024
Idioma
inglés
Tipo de recurso
artículo
Estado
versión publicada
Descripción
This work investigates the friction generated by different materials (maize kernels, pinewood pellets and plastic pellets) on corrugated steel silo walls and examines the validity of the wall contact factor defined in Eurocode EN 1991–4 for estimating the frictional force on the vertical wall. A model silo was constructed with corrugated steel lateral walls, methacrylate front and back walls, and with a configurable base to set different discharge conditions. Normal and tangential forces atdifferent heights on the silo walls were recorded, along with the mass flow index, to determine whether the flow of the material during discharge was greater with decreasing material particle size. An increase in normal and tangential forces was recorded for all materials tested during discharge, especially in the upper part of the silo. Pinewood pellets showed a greater mobilisation of internal friction as compared to plastic pellets and maize kernels.
Fil: Fuentes, Jose María. Universidad Politécnica de Madrid. Escuela Técnica Superior de Ingenieros Agrónomos de Madrid; España
Fil: Pinilla, Adriano. Universidad Politécnica de Madrid. Escuela Técnica Superior de Ingenieros Agrónomos de Madrid; España
Fil: Madrid, Marcos Andres. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata. Instituto de Física de Líquidos y Sistemas Biológicos. Universidad Nacional de La Plata. Facultad de Ciencias Exactas. Instituto de Física de Líquidos y Sistemas Biológicos; Argentina. Universidad Tecnológica Nacional. Facultad Regional La Plata. Departamento de Ingeniería Mecánica; Argentina
Fil: Wiącek, Joanna. Institute Of Agrophysics; Polonia
Fil: Ayuga Téllez, Esperanza. Universidad Politécnica de Madrid. Escuela Técnica Superior de Ingenieros Agrónomos de Madrid; España
Fil: Ayuga, Francisco. Universidad Politécnica de Madrid. Escuela Técnica Superior de Ingenieros Agrónomos de Madrid; España
Fil: Gallego, Eutiquio. Universidad Politécnica de Madrid. Escuela Técnica Superior de Ingenieros Agrónomos de Madrid; España
Materia
SILOS
GRANULAR MATTER
CORRUGATED STEEL WALL
DEM
Nivel de accesibilidad
acceso abierto
Condiciones de uso
https://creativecommons.org/licenses/by-nc/2.5/ar/
Repositorio
CONICET Digital (CONICET)
Institución
Consejo Nacional de Investigaciones Científicas y Técnicas
OAI Identificador
oai:ri.conicet.gov.ar:11336/265741
Acceder
id CONICETDig_cd2e8ff4076dca789df5e9e0ba9a8477
oai_identifier_str oai:ri.conicet.gov.ar:11336/265741
network_acronym_str CONICETDig
repository_id_str 3498
network_name_str CONICET Digital (CONICET)
spelling Measurement of friction phenomena on silo walls made of corrugated steelFuentes, Jose MaríaPinilla, AdrianoMadrid, Marcos AndresWiącek, JoannaAyuga Téllez, EsperanzaAyuga, FranciscoGallego, EutiquioSILOSGRANULAR MATTERCORRUGATED STEEL WALLDEMhttps://purl.org/becyt/ford/1.3https://purl.org/becyt/ford/1This work investigates the friction generated by different materials (maize kernels, pinewood pellets and plastic pellets) on corrugated steel silo walls and examines the validity of the wall contact factor defined in Eurocode EN 1991–4 for estimating the frictional force on the vertical wall. A model silo was constructed with corrugated steel lateral walls, methacrylate front and back walls, and with a configurable base to set different discharge conditions. Normal and tangential forces atdifferent heights on the silo walls were recorded, along with the mass flow index, to determine whether the flow of the material during discharge was greater with decreasing material particle size. An increase in normal and tangential forces was recorded for all materials tested during discharge, especially in the upper part of the silo. Pinewood pellets showed a greater mobilisation of internal friction as compared to plastic pellets and maize kernels.Fil: Fuentes, Jose María. Universidad Politécnica de Madrid. Escuela Técnica Superior de Ingenieros Agrónomos de Madrid; EspañaFil: Pinilla, Adriano. Universidad Politécnica de Madrid. Escuela Técnica Superior de Ingenieros Agrónomos de Madrid; EspañaFil: Madrid, Marcos Andres. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata. Instituto de Física de Líquidos y Sistemas Biológicos. Universidad Nacional de La Plata. Facultad de Ciencias Exactas. Instituto de Física de Líquidos y Sistemas Biológicos; Argentina. Universidad Tecnológica Nacional. Facultad Regional La Plata. Departamento de Ingeniería Mecánica; ArgentinaFil: Wiącek, Joanna. Institute Of Agrophysics; PoloniaFil: Ayuga Téllez, Esperanza. Universidad Politécnica de Madrid. Escuela Técnica Superior de Ingenieros Agrónomos de Madrid; EspañaFil: Ayuga, Francisco. Universidad Politécnica de Madrid. Escuela Técnica Superior de Ingenieros Agrónomos de Madrid; EspañaFil: Gallego, Eutiquio. Universidad Politécnica de Madrid. Escuela Técnica Superior de Ingenieros Agrónomos de Madrid; EspañaElsevier2024-11info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionhttp://purl.org/coar/resource_type/c_6501info:ar-repo/semantics/articuloapplication/pdfapplication/pdfhttp://hdl.handle.net/11336/265741Fuentes, Jose María; Pinilla, Adriano; Madrid, Marcos Andres; Wiącek, Joanna; Ayuga Téllez, Esperanza; et al.; Measurement of friction phenomena on silo walls made of corrugated steel; Elsevier; Computers and Eletronics in Agriculture; 226; 11-2024; 1-180168-1699CONICET DigitalCONICETenginfo:eu-repo/semantics/altIdentifier/url/https://linkinghub.elsevier.com/retrieve/pii/S0168169924007658info:eu-repo/semantics/altIdentifier/doi/10.1016/j.compag.2024.109374info:eu-repo/semantics/openAccesshttps://creativecommons.org/licenses/by-nc/2.5/ar/reponame:CONICET Digital (CONICET)instname:Consejo Nacional de Investigaciones Científicas y Técnicas2025-09-29T09:55:30Zoai:ri.conicet.gov.ar:11336/265741instacron:CONICETInstitucionalhttp://ri.conicet.gov.ar/Organismo científico-tecnológicoNo correspondehttp://ri.conicet.gov.ar/oai/requestdasensio@conicet.gov.ar; lcarlino@conicet.gov.arArgentinaNo correspondeNo correspondeNo correspondeopendoar:34982025-09-29 09:55:30.324CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicasfalse
dc.title.none.fl_str_mv Measurement of friction phenomena on silo walls made of corrugated steel
title Measurement of friction phenomena on silo walls made of corrugated steel
spellingShingle Measurement of friction phenomena on silo walls made of corrugated steel
Fuentes, Jose María
SILOS
GRANULAR MATTER
CORRUGATED STEEL WALL
DEM
title_short Measurement of friction phenomena on silo walls made of corrugated steel
title_full Measurement of friction phenomena on silo walls made of corrugated steel
title_fullStr Measurement of friction phenomena on silo walls made of corrugated steel
title_full_unstemmed Measurement of friction phenomena on silo walls made of corrugated steel
title_sort Measurement of friction phenomena on silo walls made of corrugated steel
dc.creator.none.fl_str_mv Fuentes, Jose María
Pinilla, Adriano
Madrid, Marcos Andres
Wiącek, Joanna
Ayuga Téllez, Esperanza
Ayuga, Francisco
Gallego, Eutiquio
author Fuentes, Jose María
author_facet Fuentes, Jose María
Pinilla, Adriano
Madrid, Marcos Andres
Wiącek, Joanna
Ayuga Téllez, Esperanza
Ayuga, Francisco
Gallego, Eutiquio
author_role author
author2 Pinilla, Adriano
Madrid, Marcos Andres
Wiącek, Joanna
Ayuga Téllez, Esperanza
Ayuga, Francisco
Gallego, Eutiquio
author2_role author
author
author
author
author
author
dc.subject.none.fl_str_mv SILOS
GRANULAR MATTER
CORRUGATED STEEL WALL
DEM
topic SILOS
GRANULAR MATTER
CORRUGATED STEEL WALL
DEM
purl_subject.fl_str_mv https://purl.org/becyt/ford/1.3
https://purl.org/becyt/ford/1
dc.description.none.fl_txt_mv This work investigates the friction generated by different materials (maize kernels, pinewood pellets and plastic pellets) on corrugated steel silo walls and examines the validity of the wall contact factor defined in Eurocode EN 1991–4 for estimating the frictional force on the vertical wall. A model silo was constructed with corrugated steel lateral walls, methacrylate front and back walls, and with a configurable base to set different discharge conditions. Normal and tangential forces atdifferent heights on the silo walls were recorded, along with the mass flow index, to determine whether the flow of the material during discharge was greater with decreasing material particle size. An increase in normal and tangential forces was recorded for all materials tested during discharge, especially in the upper part of the silo. Pinewood pellets showed a greater mobilisation of internal friction as compared to plastic pellets and maize kernels.
Fil: Fuentes, Jose María. Universidad Politécnica de Madrid. Escuela Técnica Superior de Ingenieros Agrónomos de Madrid; España
Fil: Pinilla, Adriano. Universidad Politécnica de Madrid. Escuela Técnica Superior de Ingenieros Agrónomos de Madrid; España
Fil: Madrid, Marcos Andres. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata. Instituto de Física de Líquidos y Sistemas Biológicos. Universidad Nacional de La Plata. Facultad de Ciencias Exactas. Instituto de Física de Líquidos y Sistemas Biológicos; Argentina. Universidad Tecnológica Nacional. Facultad Regional La Plata. Departamento de Ingeniería Mecánica; Argentina
Fil: Wiącek, Joanna. Institute Of Agrophysics; Polonia
Fil: Ayuga Téllez, Esperanza. Universidad Politécnica de Madrid. Escuela Técnica Superior de Ingenieros Agrónomos de Madrid; España
Fil: Ayuga, Francisco. Universidad Politécnica de Madrid. Escuela Técnica Superior de Ingenieros Agrónomos de Madrid; España
Fil: Gallego, Eutiquio. Universidad Politécnica de Madrid. Escuela Técnica Superior de Ingenieros Agrónomos de Madrid; España
description This work investigates the friction generated by different materials (maize kernels, pinewood pellets and plastic pellets) on corrugated steel silo walls and examines the validity of the wall contact factor defined in Eurocode EN 1991–4 for estimating the frictional force on the vertical wall. A model silo was constructed with corrugated steel lateral walls, methacrylate front and back walls, and with a configurable base to set different discharge conditions. Normal and tangential forces atdifferent heights on the silo walls were recorded, along with the mass flow index, to determine whether the flow of the material during discharge was greater with decreasing material particle size. An increase in normal and tangential forces was recorded for all materials tested during discharge, especially in the upper part of the silo. Pinewood pellets showed a greater mobilisation of internal friction as compared to plastic pellets and maize kernels.
publishDate 2024
dc.date.none.fl_str_mv 2024-11
dc.type.none.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
http://purl.org/coar/resource_type/c_6501
info:ar-repo/semantics/articulo
format article
status_str publishedVersion
dc.identifier.none.fl_str_mv http://hdl.handle.net/11336/265741
Fuentes, Jose María; Pinilla, Adriano; Madrid, Marcos Andres; Wiącek, Joanna; Ayuga Téllez, Esperanza; et al.; Measurement of friction phenomena on silo walls made of corrugated steel; Elsevier; Computers and Eletronics in Agriculture; 226; 11-2024; 1-18
0168-1699
CONICET Digital
CONICET
url http://hdl.handle.net/11336/265741
identifier_str_mv Fuentes, Jose María; Pinilla, Adriano; Madrid, Marcos Andres; Wiącek, Joanna; Ayuga Téllez, Esperanza; et al.; Measurement of friction phenomena on silo walls made of corrugated steel; Elsevier; Computers and Eletronics in Agriculture; 226; 11-2024; 1-18
0168-1699
CONICET Digital
CONICET
dc.language.none.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv info:eu-repo/semantics/altIdentifier/url/https://linkinghub.elsevier.com/retrieve/pii/S0168169924007658
info:eu-repo/semantics/altIdentifier/doi/10.1016/j.compag.2024.109374
dc.rights.none.fl_str_mv info:eu-repo/semantics/openAccess
https://creativecommons.org/licenses/by-nc/2.5/ar/
eu_rights_str_mv openAccess
rights_invalid_str_mv https://creativecommons.org/licenses/by-nc/2.5/ar/
dc.format.none.fl_str_mv application/pdf
application/pdf
dc.publisher.none.fl_str_mv Elsevier
publisher.none.fl_str_mv Elsevier
dc.source.none.fl_str_mv reponame:CONICET Digital (CONICET)
instname:Consejo Nacional de Investigaciones Científicas y Técnicas
reponame_str CONICET Digital (CONICET)
collection CONICET Digital (CONICET)
instname_str Consejo Nacional de Investigaciones Científicas y Técnicas
repository.name.fl_str_mv CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicas
repository.mail.fl_str_mv dasensio@conicet.gov.ar; lcarlino@conicet.gov.ar
_version_ 1844613673204580352
score 13.069144

Publicaciones similares