Fracture toughness analysis of a ductile steel by means of 3D surface displacements

Autores
Paolinelli, Luciano Daniel; Carr, Gustavo Eduardo; Gubeljak, N.; Predan, J.; Chapetti, Mirco Daniel
Año de publicación
2013
Idioma
inglés
Tipo de recurso
artículo
Estado
versión publicada
Descripción
The standards for characterization of fracture toughness of metals are focused on the calculation of fracture parameters based only on in-plane displacements of the specimen tested. Although fracture is a three-dimensional problem, out-of-plane displacements of the specimen tested are not mentioned in those documents. Since three-dimensional displacement measurement is available, it is worth investigating its potential uses in fracture tests. In this work, the fracture toughness of a structural steel was assessed through standard tests, measuring three-dimensional surface displacements. An alternative Crack Tip Opening Displacement calculation was introduced. The fracture initiation was inferred from the out-of-plane displacements, finding good agreement with results from R-curves.
Fil: Paolinelli, Luciano Daniel. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; Argentina
Fil: Carr, Gustavo Eduardo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; Argentina
Fil: Gubeljak, N.. University of Maribor; Eslovenia
Fil: Predan, J.. University of Maribor; Eslovenia
Fil: Chapetti, Mirco Daniel. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; Argentina
Materia
Fracture Initiation
Out-Of-Plane Displacements
Standard Fracture Toughness Tests
Steel
Nivel de accesibilidad
acceso abierto
Condiciones de uso
https://creativecommons.org/licenses/by-nc-nd/2.5/ar/
Repositorio
CONICET Digital (CONICET)
Institución
Consejo Nacional de Investigaciones Científicas y Técnicas
OAI Identificador
oai:ri.conicet.gov.ar:11336/77807
Acceder
id CONICETDig_9ed83b8c380b0293a0bee8cb423d07c0
oai_identifier_str oai:ri.conicet.gov.ar:11336/77807
network_acronym_str CONICETDig
repository_id_str 3498
network_name_str CONICET Digital (CONICET)
spelling Fracture toughness analysis of a ductile steel by means of 3D surface displacementsPaolinelli, Luciano DanielCarr, Gustavo EduardoGubeljak, N.Predan, J.Chapetti, Mirco DanielFracture InitiationOut-Of-Plane DisplacementsStandard Fracture Toughness TestsSteelThe standards for characterization of fracture toughness of metals are focused on the calculation of fracture parameters based only on in-plane displacements of the specimen tested. Although fracture is a three-dimensional problem, out-of-plane displacements of the specimen tested are not mentioned in those documents. Since three-dimensional displacement measurement is available, it is worth investigating its potential uses in fracture tests. In this work, the fracture toughness of a structural steel was assessed through standard tests, measuring three-dimensional surface displacements. An alternative Crack Tip Opening Displacement calculation was introduced. The fracture initiation was inferred from the out-of-plane displacements, finding good agreement with results from R-curves.Fil: Paolinelli, Luciano Daniel. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaFil: Carr, Gustavo Eduardo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaFil: Gubeljak, N.. University of Maribor; EsloveniaFil: Predan, J.. University of Maribor; EsloveniaFil: Chapetti, Mirco Daniel. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaPergamon-Elsevier Science Ltd2013-01info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionhttp://purl.org/coar/resource_type/c_6501info:ar-repo/semantics/articuloapplication/pdfapplication/pdfapplication/pdfhttp://hdl.handle.net/11336/77807Paolinelli, Luciano Daniel; Carr, Gustavo Eduardo; Gubeljak, N.; Predan, J.; Chapetti, Mirco Daniel; Fracture toughness analysis of a ductile steel by means of 3D surface displacements; Pergamon-Elsevier Science Ltd; Engineering Fracture Mechanics; 98; 1; 1-2013; 109-1210013-7944CONICET DigitalCONICETenginfo:eu-repo/semantics/altIdentifier/url/http://www.sciencedirect.com/science/article/pii/S0013794412004675info:eu-repo/semantics/altIdentifier/doi/10.1016/j.engfracmech.2012.12.006info:eu-repo/semantics/openAccesshttps://creativecommons.org/licenses/by-nc-nd/2.5/ar/reponame:CONICET Digital (CONICET)instname:Consejo Nacional de Investigaciones Científicas y Técnicas2025-09-29T10:36:41Zoai:ri.conicet.gov.ar:11336/77807instacron:CONICETInstitucionalhttp://ri.conicet.gov.ar/Organismo científico-tecnológicoNo correspondehttp://ri.conicet.gov.ar/oai/requestdasensio@conicet.gov.ar; lcarlino@conicet.gov.arArgentinaNo correspondeNo correspondeNo correspondeopendoar:34982025-09-29 10:36:41.58CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicasfalse
dc.title.none.fl_str_mv Fracture toughness analysis of a ductile steel by means of 3D surface displacements
title Fracture toughness analysis of a ductile steel by means of 3D surface displacements
spellingShingle Fracture toughness analysis of a ductile steel by means of 3D surface displacements
Paolinelli, Luciano Daniel
Fracture Initiation
Out-Of-Plane Displacements
Standard Fracture Toughness Tests
Steel
title_short Fracture toughness analysis of a ductile steel by means of 3D surface displacements
title_full Fracture toughness analysis of a ductile steel by means of 3D surface displacements
title_fullStr Fracture toughness analysis of a ductile steel by means of 3D surface displacements
title_full_unstemmed Fracture toughness analysis of a ductile steel by means of 3D surface displacements
title_sort Fracture toughness analysis of a ductile steel by means of 3D surface displacements
dc.creator.none.fl_str_mv Paolinelli, Luciano Daniel
Carr, Gustavo Eduardo
Gubeljak, N.
Predan, J.
Chapetti, Mirco Daniel
author Paolinelli, Luciano Daniel
author_facet Paolinelli, Luciano Daniel
Carr, Gustavo Eduardo
Gubeljak, N.
Predan, J.
Chapetti, Mirco Daniel
author_role author
author2 Carr, Gustavo Eduardo
Gubeljak, N.
Predan, J.
Chapetti, Mirco Daniel
author2_role author
author
author
author
dc.subject.none.fl_str_mv Fracture Initiation
Out-Of-Plane Displacements
Standard Fracture Toughness Tests
Steel
topic Fracture Initiation
Out-Of-Plane Displacements
Standard Fracture Toughness Tests
Steel
dc.description.none.fl_txt_mv The standards for characterization of fracture toughness of metals are focused on the calculation of fracture parameters based only on in-plane displacements of the specimen tested. Although fracture is a three-dimensional problem, out-of-plane displacements of the specimen tested are not mentioned in those documents. Since three-dimensional displacement measurement is available, it is worth investigating its potential uses in fracture tests. In this work, the fracture toughness of a structural steel was assessed through standard tests, measuring three-dimensional surface displacements. An alternative Crack Tip Opening Displacement calculation was introduced. The fracture initiation was inferred from the out-of-plane displacements, finding good agreement with results from R-curves.
Fil: Paolinelli, Luciano Daniel. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; Argentina
Fil: Carr, Gustavo Eduardo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; Argentina
Fil: Gubeljak, N.. University of Maribor; Eslovenia
Fil: Predan, J.. University of Maribor; Eslovenia
Fil: Chapetti, Mirco Daniel. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; Argentina
description The standards for characterization of fracture toughness of metals are focused on the calculation of fracture parameters based only on in-plane displacements of the specimen tested. Although fracture is a three-dimensional problem, out-of-plane displacements of the specimen tested are not mentioned in those documents. Since three-dimensional displacement measurement is available, it is worth investigating its potential uses in fracture tests. In this work, the fracture toughness of a structural steel was assessed through standard tests, measuring three-dimensional surface displacements. An alternative Crack Tip Opening Displacement calculation was introduced. The fracture initiation was inferred from the out-of-plane displacements, finding good agreement with results from R-curves.
publishDate 2013
dc.date.none.fl_str_mv 2013-01
dc.type.none.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
http://purl.org/coar/resource_type/c_6501
info:ar-repo/semantics/articulo
format article
status_str publishedVersion
dc.identifier.none.fl_str_mv http://hdl.handle.net/11336/77807
Paolinelli, Luciano Daniel; Carr, Gustavo Eduardo; Gubeljak, N.; Predan, J.; Chapetti, Mirco Daniel; Fracture toughness analysis of a ductile steel by means of 3D surface displacements; Pergamon-Elsevier Science Ltd; Engineering Fracture Mechanics; 98; 1; 1-2013; 109-121
0013-7944
CONICET Digital
CONICET
url http://hdl.handle.net/11336/77807
identifier_str_mv Paolinelli, Luciano Daniel; Carr, Gustavo Eduardo; Gubeljak, N.; Predan, J.; Chapetti, Mirco Daniel; Fracture toughness analysis of a ductile steel by means of 3D surface displacements; Pergamon-Elsevier Science Ltd; Engineering Fracture Mechanics; 98; 1; 1-2013; 109-121
0013-7944
CONICET Digital
CONICET
dc.language.none.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv info:eu-repo/semantics/altIdentifier/url/http://www.sciencedirect.com/science/article/pii/S0013794412004675
info:eu-repo/semantics/altIdentifier/doi/10.1016/j.engfracmech.2012.12.006
dc.rights.none.fl_str_mv info:eu-repo/semantics/openAccess
https://creativecommons.org/licenses/by-nc-nd/2.5/ar/
eu_rights_str_mv openAccess
rights_invalid_str_mv https://creativecommons.org/licenses/by-nc-nd/2.5/ar/
dc.format.none.fl_str_mv application/pdf
application/pdf
application/pdf
dc.publisher.none.fl_str_mv Pergamon-Elsevier Science Ltd
publisher.none.fl_str_mv Pergamon-Elsevier Science Ltd
dc.source.none.fl_str_mv reponame:CONICET Digital (CONICET)
instname:Consejo Nacional de Investigaciones Científicas y Técnicas
reponame_str CONICET Digital (CONICET)
collection CONICET Digital (CONICET)
instname_str Consejo Nacional de Investigaciones Científicas y Técnicas
repository.name.fl_str_mv CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicas
repository.mail.fl_str_mv dasensio@conicet.gov.ar; lcarlino@conicet.gov.ar
_version_ 1844614387550126080
score 13.070432

Publicaciones similares