Erratum: An analysis of the influence of the accelerator/sulfur ratio in the cure reaction and the uniaxial stress-strain behavior of SBR

Autores
Marzocca, Angel José; Goyanes, Silvia Nair
Año de publicación
2004
Idioma
inglés
Tipo de recurso
artículo
Estado
versión publicada
Descripción
Vulcanized styrene butadiene rubber (SBR) with different cure systems was prepared and analyzed by using the model of rubber elasticity based on the tube concept, applied to the treatment of the stress-strain measurements. Samples with several ratio accelerators to sulfur, Λ, between 0.22 and 3.0 cured at 433 K were studied. The network chain density and the crosslink density of the samples were evaluated. By means of normalized rheometer curves, the kinetics of cure of these samples were evaluated by considering the model of isothermal curing proposed by Kamal and Sourour. In this frame, the parameters of the kinetics model were obtained. A correlation between the order of the kinetic equation, n, and the network chain density of the cure samples was established.
Fil: Marzocca, Angel José. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de Física de Buenos Aires. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Física de Buenos Aires; Argentina
Fil: Goyanes, Silvia Nair. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de Física de Buenos Aires. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Física de Buenos Aires; Argentina
Materia
Crosslink Density
Nivel de accesibilidad
acceso abierto
Condiciones de uso
https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
Repositorio
CONICET Digital (CONICET)
Institución
Consejo Nacional de Investigaciones Científicas y Técnicas
OAI Identificador
oai:ri.conicet.gov.ar:11336/74198
Acceder
id CONICETDig_9b955baf651483708512f0697054c642
oai_identifier_str oai:ri.conicet.gov.ar:11336/74198
network_acronym_str CONICETDig
repository_id_str 3498
network_name_str CONICET Digital (CONICET)
spelling Erratum: An analysis of the influence of the accelerator/sulfur ratio in the cure reaction and the uniaxial stress-strain behavior of SBRMarzocca, Angel JoséGoyanes, Silvia NairCrosslink DensityVulcanized styrene butadiene rubber (SBR) with different cure systems was prepared and analyzed by using the model of rubber elasticity based on the tube concept, applied to the treatment of the stress-strain measurements. Samples with several ratio accelerators to sulfur, Λ, between 0.22 and 3.0 cured at 433 K were studied. The network chain density and the crosslink density of the samples were evaluated. By means of normalized rheometer curves, the kinetics of cure of these samples were evaluated by considering the model of isothermal curing proposed by Kamal and Sourour. In this frame, the parameters of the kinetics model were obtained. A correlation between the order of the kinetic equation, n, and the network chain density of the cure samples was established.Fil: Marzocca, Angel José. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de Física de Buenos Aires. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Física de Buenos Aires; ArgentinaFil: Goyanes, Silvia Nair. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de Física de Buenos Aires. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Física de Buenos Aires; ArgentinaJohn Wiley & Sons Inc2004-12info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionhttp://purl.org/coar/resource_type/c_6501info:ar-repo/semantics/articuloapplication/pdfapplication/pdfapplication/pdfhttp://hdl.handle.net/11336/74198Marzocca, Angel José; Goyanes, Silvia Nair; Erratum: An analysis of the influence of the accelerator/sulfur ratio in the cure reaction and the uniaxial stress-strain behavior of SBR; John Wiley & Sons Inc; Journal of Applied Polymer Science; 91; 6; 12-2004; 4110-41110021-8995CONICET DigitalCONICETenginfo:eu-repo/semantics/altIdentifier/doi/10.1002/app.20147info:eu-repo/semantics/openAccesshttps://creativecommons.org/licenses/by-nc-sa/2.5/ar/reponame:CONICET Digital (CONICET)instname:Consejo Nacional de Investigaciones Científicas y Técnicas2025-10-22T11:05:45Zoai:ri.conicet.gov.ar:11336/74198instacron:CONICETInstitucionalhttp://ri.conicet.gov.ar/Organismo científico-tecnológicoNo correspondehttp://ri.conicet.gov.ar/oai/requestdasensio@conicet.gov.ar; lcarlino@conicet.gov.arArgentinaNo correspondeNo correspondeNo correspondeopendoar:34982025-10-22 11:05:46.19CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicasfalse
dc.title.none.fl_str_mv Erratum: An analysis of the influence of the accelerator/sulfur ratio in the cure reaction and the uniaxial stress-strain behavior of SBR
title Erratum: An analysis of the influence of the accelerator/sulfur ratio in the cure reaction and the uniaxial stress-strain behavior of SBR
spellingShingle Erratum: An analysis of the influence of the accelerator/sulfur ratio in the cure reaction and the uniaxial stress-strain behavior of SBR
Marzocca, Angel José
Crosslink Density
title_short Erratum: An analysis of the influence of the accelerator/sulfur ratio in the cure reaction and the uniaxial stress-strain behavior of SBR
title_full Erratum: An analysis of the influence of the accelerator/sulfur ratio in the cure reaction and the uniaxial stress-strain behavior of SBR
title_fullStr Erratum: An analysis of the influence of the accelerator/sulfur ratio in the cure reaction and the uniaxial stress-strain behavior of SBR
title_full_unstemmed Erratum: An analysis of the influence of the accelerator/sulfur ratio in the cure reaction and the uniaxial stress-strain behavior of SBR
title_sort Erratum: An analysis of the influence of the accelerator/sulfur ratio in the cure reaction and the uniaxial stress-strain behavior of SBR
dc.creator.none.fl_str_mv Marzocca, Angel José
Goyanes, Silvia Nair
author Marzocca, Angel José
author_facet Marzocca, Angel José
Goyanes, Silvia Nair
author_role author
author2 Goyanes, Silvia Nair
author2_role author
dc.subject.none.fl_str_mv Crosslink Density
topic Crosslink Density
dc.description.none.fl_txt_mv Vulcanized styrene butadiene rubber (SBR) with different cure systems was prepared and analyzed by using the model of rubber elasticity based on the tube concept, applied to the treatment of the stress-strain measurements. Samples with several ratio accelerators to sulfur, Λ, between 0.22 and 3.0 cured at 433 K were studied. The network chain density and the crosslink density of the samples were evaluated. By means of normalized rheometer curves, the kinetics of cure of these samples were evaluated by considering the model of isothermal curing proposed by Kamal and Sourour. In this frame, the parameters of the kinetics model were obtained. A correlation between the order of the kinetic equation, n, and the network chain density of the cure samples was established.
Fil: Marzocca, Angel José. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de Física de Buenos Aires. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Física de Buenos Aires; Argentina
Fil: Goyanes, Silvia Nair. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de Física de Buenos Aires. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Física de Buenos Aires; Argentina
description Vulcanized styrene butadiene rubber (SBR) with different cure systems was prepared and analyzed by using the model of rubber elasticity based on the tube concept, applied to the treatment of the stress-strain measurements. Samples with several ratio accelerators to sulfur, Λ, between 0.22 and 3.0 cured at 433 K were studied. The network chain density and the crosslink density of the samples were evaluated. By means of normalized rheometer curves, the kinetics of cure of these samples were evaluated by considering the model of isothermal curing proposed by Kamal and Sourour. In this frame, the parameters of the kinetics model were obtained. A correlation between the order of the kinetic equation, n, and the network chain density of the cure samples was established.
publishDate 2004
dc.date.none.fl_str_mv 2004-12
dc.type.none.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
http://purl.org/coar/resource_type/c_6501
info:ar-repo/semantics/articulo
format article
status_str publishedVersion
dc.identifier.none.fl_str_mv http://hdl.handle.net/11336/74198
Marzocca, Angel José; Goyanes, Silvia Nair; Erratum: An analysis of the influence of the accelerator/sulfur ratio in the cure reaction and the uniaxial stress-strain behavior of SBR; John Wiley & Sons Inc; Journal of Applied Polymer Science; 91; 6; 12-2004; 4110-4111
0021-8995
CONICET Digital
CONICET
url http://hdl.handle.net/11336/74198
identifier_str_mv Marzocca, Angel José; Goyanes, Silvia Nair; Erratum: An analysis of the influence of the accelerator/sulfur ratio in the cure reaction and the uniaxial stress-strain behavior of SBR; John Wiley & Sons Inc; Journal of Applied Polymer Science; 91; 6; 12-2004; 4110-4111
0021-8995
CONICET Digital
CONICET
dc.language.none.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv info:eu-repo/semantics/altIdentifier/doi/10.1002/app.20147
dc.rights.none.fl_str_mv info:eu-repo/semantics/openAccess
https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
eu_rights_str_mv openAccess
rights_invalid_str_mv https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
dc.format.none.fl_str_mv application/pdf
application/pdf
application/pdf
dc.publisher.none.fl_str_mv John Wiley & Sons Inc
publisher.none.fl_str_mv John Wiley & Sons Inc
dc.source.none.fl_str_mv reponame:CONICET Digital (CONICET)
instname:Consejo Nacional de Investigaciones Científicas y Técnicas
reponame_str CONICET Digital (CONICET)
collection CONICET Digital (CONICET)
instname_str Consejo Nacional de Investigaciones Científicas y Técnicas
repository.name.fl_str_mv CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicas
repository.mail.fl_str_mv dasensio@conicet.gov.ar; lcarlino@conicet.gov.ar
_version_ 1846781343249203200
score 12.982451

Publicaciones similares