Identification and location of faults in electric power distribution systems from measurements and data on Gis platforms
- Autores
- Di Mauro, Guillermo Fabián; Agüero, Carlos Hernan; Vignerte, Juan Manuel; Strack, Jorge Luis; Anaut, Daniel Orlando
- Año de publicación
- 2018
- Idioma
- inglés
- Tipo de recurso
- artículo
- Estado
- versión publicada
- Descripción
- This paper presents the development of a collaborative computer tool for the location of faults in electricity distribution systems oriented to overhead lines. The methodology implemented for the location of the fault is based on the analysis of the fault impedance from the voltage and current data measured in the header of the damaged distributor and in the evaluation of all its branches. The results provided by the tool are displayed on the layout of the network in the environment of a Geographic Information System (GIS). The calculation algorithms developed use the topological and constructive information of the network that is stored in standardized files according to the requirements of State Control Organisms (Argentina). The tool was tested by modeling a distributor belonging to an electric power cooperative in a simulation program of power systems. The results of the implemented method showed maximum errors of the order of 5% in the actual location distance of the fault. The presentation of the results in the graphic environment of the network offers the operators a quick interpretation of the possible location of the fault, which results in a reduction of the repair times.
Fil: Di Mauro, Guillermo Fabián. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Departamento de Ingeniería Eléctrica; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones Científicas y Tecnológicas en Electrónica. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones Científicas y Tecnológicas en Electrónica; Argentina
Fil: Agüero, Carlos Hernan. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Departamento de Ingeniería Eléctrica; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones Científicas y Tecnológicas en Electrónica. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones Científicas y Tecnológicas en Electrónica; Argentina
Fil: Vignerte, Juan Manuel. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Departamento de Ingeniería Eléctrica; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones Científicas y Tecnológicas en Electrónica. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones Científicas y Tecnológicas en Electrónica; Argentina
Fil: Strack, Jorge Luis. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Departamento de Ingeniería Eléctrica; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones Científicas y Tecnológicas en Electrónica. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones Científicas y Tecnológicas en Electrónica; Argentina
Fil: Anaut, Daniel Orlando. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Departamento de Ingeniería Eléctrica; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones Científicas y Tecnológicas en Electrónica. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones Científicas y Tecnológicas en Electrónica; Argentina - Materia
-
POWER DISTRIBUTION
POWER DISTRIBUTION FAULTS
FAULT LOCATION
POWER QUALITY
GEOGRAPHIC INFORMATION SYSTEM
FAULT IMPEDANCE - Nivel de accesibilidad
- acceso abierto
- Condiciones de uso
- https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
- Repositorio
- Institución
- Consejo Nacional de Investigaciones Científicas y Técnicas
- OAI Identificador
- oai:ri.conicet.gov.ar:11336/182966
Ver los metadatos del registro completo
id |
CONICETDig_8f58da0cab2074685a544c559e0d0648 |
---|---|
oai_identifier_str |
oai:ri.conicet.gov.ar:11336/182966 |
network_acronym_str |
CONICETDig |
repository_id_str |
3498 |
network_name_str |
CONICET Digital (CONICET) |
spelling |
Identification and location of faults in electric power distribution systems from measurements and data on Gis platformsDi Mauro, Guillermo FabiánAgüero, Carlos HernanVignerte, Juan ManuelStrack, Jorge LuisAnaut, Daniel OrlandoPOWER DISTRIBUTIONPOWER DISTRIBUTION FAULTSFAULT LOCATIONPOWER QUALITYGEOGRAPHIC INFORMATION SYSTEMFAULT IMPEDANCEhttps://purl.org/becyt/ford/2.2https://purl.org/becyt/ford/2This paper presents the development of a collaborative computer tool for the location of faults in electricity distribution systems oriented to overhead lines. The methodology implemented for the location of the fault is based on the analysis of the fault impedance from the voltage and current data measured in the header of the damaged distributor and in the evaluation of all its branches. The results provided by the tool are displayed on the layout of the network in the environment of a Geographic Information System (GIS). The calculation algorithms developed use the topological and constructive information of the network that is stored in standardized files according to the requirements of State Control Organisms (Argentina). The tool was tested by modeling a distributor belonging to an electric power cooperative in a simulation program of power systems. The results of the implemented method showed maximum errors of the order of 5% in the actual location distance of the fault. The presentation of the results in the graphic environment of the network offers the operators a quick interpretation of the possible location of the fault, which results in a reduction of the repair times.Fil: Di Mauro, Guillermo Fabián. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Departamento de Ingeniería Eléctrica; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones Científicas y Tecnológicas en Electrónica. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones Científicas y Tecnológicas en Electrónica; ArgentinaFil: Agüero, Carlos Hernan. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Departamento de Ingeniería Eléctrica; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones Científicas y Tecnológicas en Electrónica. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones Científicas y Tecnológicas en Electrónica; ArgentinaFil: Vignerte, Juan Manuel. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Departamento de Ingeniería Eléctrica; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones Científicas y Tecnológicas en Electrónica. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones Científicas y Tecnológicas en Electrónica; ArgentinaFil: Strack, Jorge Luis. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Departamento de Ingeniería Eléctrica; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones Científicas y Tecnológicas en Electrónica. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones Científicas y Tecnológicas en Electrónica; ArgentinaFil: Anaut, Daniel Orlando. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Departamento de Ingeniería Eléctrica; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones Científicas y Tecnológicas en Electrónica. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones Científicas y Tecnológicas en Electrónica; ArgentinaInternational Association of Engineering and Management Education2018-08info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionhttp://purl.org/coar/resource_type/c_6501info:ar-repo/semantics/articuloapplication/pdfapplication/pdfapplication/pdfapplication/pdfapplication/pdfhttp://hdl.handle.net/11336/182966Di Mauro, Guillermo Fabián; Agüero, Carlos Hernan; Vignerte, Juan Manuel; Strack, Jorge Luis; Anaut, Daniel Orlando; Identification and location of faults in electric power distribution systems from measurements and data on Gis platforms; International Association of Engineering and Management Education; International Journal of Electrical Engineering & Technology; 9; 4; 8-2018; 58-660976-65450976-6553CONICET DigitalCONICETenginfo:eu-repo/semantics/altIdentifier/url/https://sdbindex.com/Documents/index/00000003/00000-04187info:eu-repo/semantics/openAccesshttps://creativecommons.org/licenses/by-nc-sa/2.5/ar/reponame:CONICET Digital (CONICET)instname:Consejo Nacional de Investigaciones Científicas y Técnicas2025-09-03T09:59:57Zoai:ri.conicet.gov.ar:11336/182966instacron:CONICETInstitucionalhttp://ri.conicet.gov.ar/Organismo científico-tecnológicoNo correspondehttp://ri.conicet.gov.ar/oai/requestdasensio@conicet.gov.ar; lcarlino@conicet.gov.arArgentinaNo correspondeNo correspondeNo correspondeopendoar:34982025-09-03 09:59:57.593CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicasfalse |
dc.title.none.fl_str_mv |
Identification and location of faults in electric power distribution systems from measurements and data on Gis platforms |
title |
Identification and location of faults in electric power distribution systems from measurements and data on Gis platforms |
spellingShingle |
Identification and location of faults in electric power distribution systems from measurements and data on Gis platforms Di Mauro, Guillermo Fabián POWER DISTRIBUTION POWER DISTRIBUTION FAULTS FAULT LOCATION POWER QUALITY GEOGRAPHIC INFORMATION SYSTEM FAULT IMPEDANCE |
title_short |
Identification and location of faults in electric power distribution systems from measurements and data on Gis platforms |
title_full |
Identification and location of faults in electric power distribution systems from measurements and data on Gis platforms |
title_fullStr |
Identification and location of faults in electric power distribution systems from measurements and data on Gis platforms |
title_full_unstemmed |
Identification and location of faults in electric power distribution systems from measurements and data on Gis platforms |
title_sort |
Identification and location of faults in electric power distribution systems from measurements and data on Gis platforms |
dc.creator.none.fl_str_mv |
Di Mauro, Guillermo Fabián Agüero, Carlos Hernan Vignerte, Juan Manuel Strack, Jorge Luis Anaut, Daniel Orlando |
author |
Di Mauro, Guillermo Fabián |
author_facet |
Di Mauro, Guillermo Fabián Agüero, Carlos Hernan Vignerte, Juan Manuel Strack, Jorge Luis Anaut, Daniel Orlando |
author_role |
author |
author2 |
Agüero, Carlos Hernan Vignerte, Juan Manuel Strack, Jorge Luis Anaut, Daniel Orlando |
author2_role |
author author author author |
dc.subject.none.fl_str_mv |
POWER DISTRIBUTION POWER DISTRIBUTION FAULTS FAULT LOCATION POWER QUALITY GEOGRAPHIC INFORMATION SYSTEM FAULT IMPEDANCE |
topic |
POWER DISTRIBUTION POWER DISTRIBUTION FAULTS FAULT LOCATION POWER QUALITY GEOGRAPHIC INFORMATION SYSTEM FAULT IMPEDANCE |
purl_subject.fl_str_mv |
https://purl.org/becyt/ford/2.2 https://purl.org/becyt/ford/2 |
dc.description.none.fl_txt_mv |
This paper presents the development of a collaborative computer tool for the location of faults in electricity distribution systems oriented to overhead lines. The methodology implemented for the location of the fault is based on the analysis of the fault impedance from the voltage and current data measured in the header of the damaged distributor and in the evaluation of all its branches. The results provided by the tool are displayed on the layout of the network in the environment of a Geographic Information System (GIS). The calculation algorithms developed use the topological and constructive information of the network that is stored in standardized files according to the requirements of State Control Organisms (Argentina). The tool was tested by modeling a distributor belonging to an electric power cooperative in a simulation program of power systems. The results of the implemented method showed maximum errors of the order of 5% in the actual location distance of the fault. The presentation of the results in the graphic environment of the network offers the operators a quick interpretation of the possible location of the fault, which results in a reduction of the repair times. Fil: Di Mauro, Guillermo Fabián. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Departamento de Ingeniería Eléctrica; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones Científicas y Tecnológicas en Electrónica. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones Científicas y Tecnológicas en Electrónica; Argentina Fil: Agüero, Carlos Hernan. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Departamento de Ingeniería Eléctrica; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones Científicas y Tecnológicas en Electrónica. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones Científicas y Tecnológicas en Electrónica; Argentina Fil: Vignerte, Juan Manuel. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Departamento de Ingeniería Eléctrica; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones Científicas y Tecnológicas en Electrónica. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones Científicas y Tecnológicas en Electrónica; Argentina Fil: Strack, Jorge Luis. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Departamento de Ingeniería Eléctrica; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones Científicas y Tecnológicas en Electrónica. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones Científicas y Tecnológicas en Electrónica; Argentina Fil: Anaut, Daniel Orlando. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Departamento de Ingeniería Eléctrica; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones Científicas y Tecnológicas en Electrónica. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones Científicas y Tecnológicas en Electrónica; Argentina |
description |
This paper presents the development of a collaborative computer tool for the location of faults in electricity distribution systems oriented to overhead lines. The methodology implemented for the location of the fault is based on the analysis of the fault impedance from the voltage and current data measured in the header of the damaged distributor and in the evaluation of all its branches. The results provided by the tool are displayed on the layout of the network in the environment of a Geographic Information System (GIS). The calculation algorithms developed use the topological and constructive information of the network that is stored in standardized files according to the requirements of State Control Organisms (Argentina). The tool was tested by modeling a distributor belonging to an electric power cooperative in a simulation program of power systems. The results of the implemented method showed maximum errors of the order of 5% in the actual location distance of the fault. The presentation of the results in the graphic environment of the network offers the operators a quick interpretation of the possible location of the fault, which results in a reduction of the repair times. |
publishDate |
2018 |
dc.date.none.fl_str_mv |
2018-08 |
dc.type.none.fl_str_mv |
info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion http://purl.org/coar/resource_type/c_6501 info:ar-repo/semantics/articulo |
format |
article |
status_str |
publishedVersion |
dc.identifier.none.fl_str_mv |
http://hdl.handle.net/11336/182966 Di Mauro, Guillermo Fabián; Agüero, Carlos Hernan; Vignerte, Juan Manuel; Strack, Jorge Luis; Anaut, Daniel Orlando; Identification and location of faults in electric power distribution systems from measurements and data on Gis platforms; International Association of Engineering and Management Education; International Journal of Electrical Engineering & Technology; 9; 4; 8-2018; 58-66 0976-6545 0976-6553 CONICET Digital CONICET |
url |
http://hdl.handle.net/11336/182966 |
identifier_str_mv |
Di Mauro, Guillermo Fabián; Agüero, Carlos Hernan; Vignerte, Juan Manuel; Strack, Jorge Luis; Anaut, Daniel Orlando; Identification and location of faults in electric power distribution systems from measurements and data on Gis platforms; International Association of Engineering and Management Education; International Journal of Electrical Engineering & Technology; 9; 4; 8-2018; 58-66 0976-6545 0976-6553 CONICET Digital CONICET |
dc.language.none.fl_str_mv |
eng |
language |
eng |
dc.relation.none.fl_str_mv |
info:eu-repo/semantics/altIdentifier/url/https://sdbindex.com/Documents/index/00000003/00000-04187 |
dc.rights.none.fl_str_mv |
info:eu-repo/semantics/openAccess https://creativecommons.org/licenses/by-nc-sa/2.5/ar/ |
eu_rights_str_mv |
openAccess |
rights_invalid_str_mv |
https://creativecommons.org/licenses/by-nc-sa/2.5/ar/ |
dc.format.none.fl_str_mv |
application/pdf application/pdf application/pdf application/pdf application/pdf |
dc.publisher.none.fl_str_mv |
International Association of Engineering and Management Education |
publisher.none.fl_str_mv |
International Association of Engineering and Management Education |
dc.source.none.fl_str_mv |
reponame:CONICET Digital (CONICET) instname:Consejo Nacional de Investigaciones Científicas y Técnicas |
reponame_str |
CONICET Digital (CONICET) |
collection |
CONICET Digital (CONICET) |
instname_str |
Consejo Nacional de Investigaciones Científicas y Técnicas |
repository.name.fl_str_mv |
CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicas |
repository.mail.fl_str_mv |
dasensio@conicet.gov.ar; lcarlino@conicet.gov.ar |
_version_ |
1842269611145297920 |
score |
13.13397 |