Densification of Al powder and Al–Cu matrix composite (reinforced with 15% Saffil short fibres) during axial cold compaction
- Autores
- Moreno Gomez, Mario Fredy; Gonzalez Oliver, Carlos Julian R.
- Año de publicación
- 2011
- Idioma
- inglés
- Tipo de recurso
- artículo
- Estado
- versión publicada
- Descripción
- Pure Al, Alumix 13 (Al–4.5 wt.% Cu 0.5 Mg 0.2 Si) powders and Alumix13 reinforced with 15 wt.% Saffil short fibers were compacted up to 250–386 MPa in an axial die to study their compacting behavior. The final relative densities D were higher than 0.95 for all unreinforced powders and 0.86 for the composite. Different micromechanical and phenomenological models were used to fit density–pressure relations. Arzt model describes the powder compaction with good agreement up to D ~ 0.85. Kawakita equation results as a best linear fit for all tests, but its compressibility parameter b is not in agreement with the hardening behavior of the composite. Panelli and Ambrosio equation could describe the data fairly well qualitatively for all compactions tests, however, over a limited pressure range. Finally, Konopicky relationship turned out to be very useful and fitted the densification data of all three materials quite well. Its slope from linear P vs. ln (1/(1−D)) plots, is related to the yield stress and characterizes thework hardening developed during plastic deformation while the density was increased. Microhardness values increase with the compacting pressure and such tendency agrees with the rising values of yield stresses, obtained by Konopicky.
Fil: Moreno Gomez, Mario Fredy. Comisión Nacional de Energía Atómica. Gerencia de Área de Aplicaciones de la Tecnología Nuclear. Gerencia de Investigación Aplicada; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Patagonia Norte; Argentina
Fil: Gonzalez Oliver, Carlos Julian R.. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Patagonia Norte; Argentina. Comisión Nacional de Energía Atómica. Gerencia de Área de Aplicaciones de la Tecnología Nuclear. Gerencia de Investigación Aplicada; Argentina - Materia
-
ALUMINUM POWDER
METAL MATRIX COMPOSITES
CERAMIC SHORT FIBERS
PLASTIC COLD COMPACTION
DENSIFICATION BEHAVIOR - Nivel de accesibilidad
- acceso abierto
- Condiciones de uso
- https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
- Repositorio
.jpg)
- Institución
- Consejo Nacional de Investigaciones Científicas y Técnicas
- OAI Identificador
- oai:ri.conicet.gov.ar:11336/275497
Ver los metadatos del registro completo
| id |
CONICETDig_7d58a57184146df6e1033755a39e393e |
|---|---|
| oai_identifier_str |
oai:ri.conicet.gov.ar:11336/275497 |
| network_acronym_str |
CONICETDig |
| repository_id_str |
3498 |
| network_name_str |
CONICET Digital (CONICET) |
| spelling |
Densification of Al powder and Al–Cu matrix composite (reinforced with 15% Saffil short fibres) during axial cold compactionMoreno Gomez, Mario FredyGonzalez Oliver, Carlos Julian R.ALUMINUM POWDERMETAL MATRIX COMPOSITESCERAMIC SHORT FIBERSPLASTIC COLD COMPACTIONDENSIFICATION BEHAVIORhttps://purl.org/becyt/ford/2.5https://purl.org/becyt/ford/2https://purl.org/becyt/ford/1.3https://purl.org/becyt/ford/1Pure Al, Alumix 13 (Al–4.5 wt.% Cu 0.5 Mg 0.2 Si) powders and Alumix13 reinforced with 15 wt.% Saffil short fibers were compacted up to 250–386 MPa in an axial die to study their compacting behavior. The final relative densities D were higher than 0.95 for all unreinforced powders and 0.86 for the composite. Different micromechanical and phenomenological models were used to fit density–pressure relations. Arzt model describes the powder compaction with good agreement up to D ~ 0.85. Kawakita equation results as a best linear fit for all tests, but its compressibility parameter b is not in agreement with the hardening behavior of the composite. Panelli and Ambrosio equation could describe the data fairly well qualitatively for all compactions tests, however, over a limited pressure range. Finally, Konopicky relationship turned out to be very useful and fitted the densification data of all three materials quite well. Its slope from linear P vs. ln (1/(1−D)) plots, is related to the yield stress and characterizes thework hardening developed during plastic deformation while the density was increased. Microhardness values increase with the compacting pressure and such tendency agrees with the rising values of yield stresses, obtained by Konopicky.Fil: Moreno Gomez, Mario Fredy. Comisión Nacional de Energía Atómica. Gerencia de Área de Aplicaciones de la Tecnología Nuclear. Gerencia de Investigación Aplicada; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Patagonia Norte; ArgentinaFil: Gonzalez Oliver, Carlos Julian R.. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Patagonia Norte; Argentina. Comisión Nacional de Energía Atómica. Gerencia de Área de Aplicaciones de la Tecnología Nuclear. Gerencia de Investigación Aplicada; ArgentinaElsevier Science SA2011-03info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionhttp://purl.org/coar/resource_type/c_6501info:ar-repo/semantics/articuloapplication/pdfapplication/pdfapplication/pdfhttp://hdl.handle.net/11336/275497Moreno Gomez, Mario Fredy; Gonzalez Oliver, Carlos Julian R.; Densification of Al powder and Al–Cu matrix composite (reinforced with 15% Saffil short fibres) during axial cold compaction; Elsevier Science SA; Powder Technology; 206; 3; 3-2011; 297-3050032-5910CONICET DigitalCONICETenginfo:eu-repo/semantics/altIdentifier/url/https://www.sciencedirect.com/science/article/abs/pii/S0032591010005206info:eu-repo/semantics/altIdentifier/doi/10.1016/j.powtec.2010.09.034info:eu-repo/semantics/openAccesshttps://creativecommons.org/licenses/by-nc-sa/2.5/ar/reponame:CONICET Digital (CONICET)instname:Consejo Nacional de Investigaciones Científicas y Técnicas2025-12-23T14:46:11Zoai:ri.conicet.gov.ar:11336/275497instacron:CONICETInstitucionalhttp://ri.conicet.gov.ar/Organismo científico-tecnológicoNo correspondehttp://ri.conicet.gov.ar/oai/requestdasensio@conicet.gov.ar; lcarlino@conicet.gov.arArgentinaNo correspondeNo correspondeNo correspondeopendoar:34982025-12-23 14:46:12.002CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicasfalse |
| dc.title.none.fl_str_mv |
Densification of Al powder and Al–Cu matrix composite (reinforced with 15% Saffil short fibres) during axial cold compaction |
| title |
Densification of Al powder and Al–Cu matrix composite (reinforced with 15% Saffil short fibres) during axial cold compaction |
| spellingShingle |
Densification of Al powder and Al–Cu matrix composite (reinforced with 15% Saffil short fibres) during axial cold compaction Moreno Gomez, Mario Fredy ALUMINUM POWDER METAL MATRIX COMPOSITES CERAMIC SHORT FIBERS PLASTIC COLD COMPACTION DENSIFICATION BEHAVIOR |
| title_short |
Densification of Al powder and Al–Cu matrix composite (reinforced with 15% Saffil short fibres) during axial cold compaction |
| title_full |
Densification of Al powder and Al–Cu matrix composite (reinforced with 15% Saffil short fibres) during axial cold compaction |
| title_fullStr |
Densification of Al powder and Al–Cu matrix composite (reinforced with 15% Saffil short fibres) during axial cold compaction |
| title_full_unstemmed |
Densification of Al powder and Al–Cu matrix composite (reinforced with 15% Saffil short fibres) during axial cold compaction |
| title_sort |
Densification of Al powder and Al–Cu matrix composite (reinforced with 15% Saffil short fibres) during axial cold compaction |
| dc.creator.none.fl_str_mv |
Moreno Gomez, Mario Fredy Gonzalez Oliver, Carlos Julian R. |
| author |
Moreno Gomez, Mario Fredy |
| author_facet |
Moreno Gomez, Mario Fredy Gonzalez Oliver, Carlos Julian R. |
| author_role |
author |
| author2 |
Gonzalez Oliver, Carlos Julian R. |
| author2_role |
author |
| dc.subject.none.fl_str_mv |
ALUMINUM POWDER METAL MATRIX COMPOSITES CERAMIC SHORT FIBERS PLASTIC COLD COMPACTION DENSIFICATION BEHAVIOR |
| topic |
ALUMINUM POWDER METAL MATRIX COMPOSITES CERAMIC SHORT FIBERS PLASTIC COLD COMPACTION DENSIFICATION BEHAVIOR |
| purl_subject.fl_str_mv |
https://purl.org/becyt/ford/2.5 https://purl.org/becyt/ford/2 https://purl.org/becyt/ford/1.3 https://purl.org/becyt/ford/1 |
| dc.description.none.fl_txt_mv |
Pure Al, Alumix 13 (Al–4.5 wt.% Cu 0.5 Mg 0.2 Si) powders and Alumix13 reinforced with 15 wt.% Saffil short fibers were compacted up to 250–386 MPa in an axial die to study their compacting behavior. The final relative densities D were higher than 0.95 for all unreinforced powders and 0.86 for the composite. Different micromechanical and phenomenological models were used to fit density–pressure relations. Arzt model describes the powder compaction with good agreement up to D ~ 0.85. Kawakita equation results as a best linear fit for all tests, but its compressibility parameter b is not in agreement with the hardening behavior of the composite. Panelli and Ambrosio equation could describe the data fairly well qualitatively for all compactions tests, however, over a limited pressure range. Finally, Konopicky relationship turned out to be very useful and fitted the densification data of all three materials quite well. Its slope from linear P vs. ln (1/(1−D)) plots, is related to the yield stress and characterizes thework hardening developed during plastic deformation while the density was increased. Microhardness values increase with the compacting pressure and such tendency agrees with the rising values of yield stresses, obtained by Konopicky. Fil: Moreno Gomez, Mario Fredy. Comisión Nacional de Energía Atómica. Gerencia de Área de Aplicaciones de la Tecnología Nuclear. Gerencia de Investigación Aplicada; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Patagonia Norte; Argentina Fil: Gonzalez Oliver, Carlos Julian R.. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Patagonia Norte; Argentina. Comisión Nacional de Energía Atómica. Gerencia de Área de Aplicaciones de la Tecnología Nuclear. Gerencia de Investigación Aplicada; Argentina |
| description |
Pure Al, Alumix 13 (Al–4.5 wt.% Cu 0.5 Mg 0.2 Si) powders and Alumix13 reinforced with 15 wt.% Saffil short fibers were compacted up to 250–386 MPa in an axial die to study their compacting behavior. The final relative densities D were higher than 0.95 for all unreinforced powders and 0.86 for the composite. Different micromechanical and phenomenological models were used to fit density–pressure relations. Arzt model describes the powder compaction with good agreement up to D ~ 0.85. Kawakita equation results as a best linear fit for all tests, but its compressibility parameter b is not in agreement with the hardening behavior of the composite. Panelli and Ambrosio equation could describe the data fairly well qualitatively for all compactions tests, however, over a limited pressure range. Finally, Konopicky relationship turned out to be very useful and fitted the densification data of all three materials quite well. Its slope from linear P vs. ln (1/(1−D)) plots, is related to the yield stress and characterizes thework hardening developed during plastic deformation while the density was increased. Microhardness values increase with the compacting pressure and such tendency agrees with the rising values of yield stresses, obtained by Konopicky. |
| publishDate |
2011 |
| dc.date.none.fl_str_mv |
2011-03 |
| dc.type.none.fl_str_mv |
info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion http://purl.org/coar/resource_type/c_6501 info:ar-repo/semantics/articulo |
| format |
article |
| status_str |
publishedVersion |
| dc.identifier.none.fl_str_mv |
http://hdl.handle.net/11336/275497 Moreno Gomez, Mario Fredy; Gonzalez Oliver, Carlos Julian R.; Densification of Al powder and Al–Cu matrix composite (reinforced with 15% Saffil short fibres) during axial cold compaction; Elsevier Science SA; Powder Technology; 206; 3; 3-2011; 297-305 0032-5910 CONICET Digital CONICET |
| url |
http://hdl.handle.net/11336/275497 |
| identifier_str_mv |
Moreno Gomez, Mario Fredy; Gonzalez Oliver, Carlos Julian R.; Densification of Al powder and Al–Cu matrix composite (reinforced with 15% Saffil short fibres) during axial cold compaction; Elsevier Science SA; Powder Technology; 206; 3; 3-2011; 297-305 0032-5910 CONICET Digital CONICET |
| dc.language.none.fl_str_mv |
eng |
| language |
eng |
| dc.relation.none.fl_str_mv |
info:eu-repo/semantics/altIdentifier/url/https://www.sciencedirect.com/science/article/abs/pii/S0032591010005206 info:eu-repo/semantics/altIdentifier/doi/10.1016/j.powtec.2010.09.034 |
| dc.rights.none.fl_str_mv |
info:eu-repo/semantics/openAccess https://creativecommons.org/licenses/by-nc-sa/2.5/ar/ |
| eu_rights_str_mv |
openAccess |
| rights_invalid_str_mv |
https://creativecommons.org/licenses/by-nc-sa/2.5/ar/ |
| dc.format.none.fl_str_mv |
application/pdf application/pdf application/pdf |
| dc.publisher.none.fl_str_mv |
Elsevier Science SA |
| publisher.none.fl_str_mv |
Elsevier Science SA |
| dc.source.none.fl_str_mv |
reponame:CONICET Digital (CONICET) instname:Consejo Nacional de Investigaciones Científicas y Técnicas |
| reponame_str |
CONICET Digital (CONICET) |
| collection |
CONICET Digital (CONICET) |
| instname_str |
Consejo Nacional de Investigaciones Científicas y Técnicas |
| repository.name.fl_str_mv |
CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicas |
| repository.mail.fl_str_mv |
dasensio@conicet.gov.ar; lcarlino@conicet.gov.ar |
| _version_ |
1852335813353799680 |
| score |
12.952241 |