Experimental and numerical analysis on the formability of a heat treated AA1100 aluminum alloy sheet

Autores
Duran, Alicia I.; Signorelli, Javier Walter; Celentano, Diego J.; Cruchaga, Marcela; François, Manuel
Año de publicación
2015
Idioma
inglés
Tipo de recurso
artículo
Estado
versión publicada
Descripción
The objective of this work is to experimentally and numerically determine the influence of plastic anisotropy on the forming limit curve (FLC) for a heat-treated (300 C-1 h) AA1100 aluminum alloy sheet. The FLCs were obtained by the Nakajima test, where the anisotropy effect on the FLC was evaluated using hourglass-type samples taken at 0, 45, and 90 with respect to the sheet rolling direction. The effect of crystal orientations on the FLC is investigated using three micro-macro averaging schemes coupled to a Marciniak and Kuczynski (MK) analysis: the tangent viscoplastic self-consistent (VPSC), the tuned strength aVPSC, and the full-constraint Taylor model. The predicted limit strains in the left-hand side of the FLC agree well with experimental measurements along the three testing directions, while differences are found under biaxial stretching modes. Particularly, MK-VPSC predicts an unexpected limit strain profile in the right-hand side of the FLC for samples tested along the transverse direction. Only MK-aVPSC, with a tuning factor of 0.2, predicts satisfactorily the set of FLC measurements. Finally, the correlation of the predicted limit strains with the predicted yield surface by each model was also discussed.
Fil: Duran, Alicia I.. Pontificia Universidad Católica de Chile; Chile
Fil: Signorelli, Javier Walter. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Rosario. Instituto de Física de Rosario (i); Argentina
Fil: Celentano, Diego J.. Pontificia Universidad Católica de Chile; Chile
Fil: Cruchaga, Marcela. Universidad de Santiago de Chile; Chile
Fil: François, Manuel. Université de Technologie de Troyes; Francia
Materia
Marciniak And Kuczynski
Sheet Formability
Viscoplastic Polycrystalline Self-Consistent (Vpsc) Model
Nivel de accesibilidad
acceso abierto
Condiciones de uso
https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
Repositorio
CONICET Digital (CONICET)
Institución
Consejo Nacional de Investigaciones Científicas y Técnicas
OAI Identificador
oai:ri.conicet.gov.ar:11336/6157
Acceder
id CONICETDig_79339578af0f324e8391faac29512c93
oai_identifier_str oai:ri.conicet.gov.ar:11336/6157
network_acronym_str CONICETDig
repository_id_str 3498
network_name_str CONICET Digital (CONICET)
spelling Experimental and numerical analysis on the formability of a heat treated AA1100 aluminum alloy sheetDuran, Alicia I.Signorelli, Javier WalterCelentano, Diego J.Cruchaga, MarcelaFrançois, ManuelMarciniak And KuczynskiSheet FormabilityViscoplastic Polycrystalline Self-Consistent (Vpsc) Modelhttps://purl.org/becyt/ford/2.5https://purl.org/becyt/ford/2The objective of this work is to experimentally and numerically determine the influence of plastic anisotropy on the forming limit curve (FLC) for a heat-treated (300 C-1 h) AA1100 aluminum alloy sheet. The FLCs were obtained by the Nakajima test, where the anisotropy effect on the FLC was evaluated using hourglass-type samples taken at 0, 45, and 90 with respect to the sheet rolling direction. The effect of crystal orientations on the FLC is investigated using three micro-macro averaging schemes coupled to a Marciniak and Kuczynski (MK) analysis: the tangent viscoplastic self-consistent (VPSC), the tuned strength aVPSC, and the full-constraint Taylor model. The predicted limit strains in the left-hand side of the FLC agree well with experimental measurements along the three testing directions, while differences are found under biaxial stretching modes. Particularly, MK-VPSC predicts an unexpected limit strain profile in the right-hand side of the FLC for samples tested along the transverse direction. Only MK-aVPSC, with a tuning factor of 0.2, predicts satisfactorily the set of FLC measurements. Finally, the correlation of the predicted limit strains with the predicted yield surface by each model was also discussed.Fil: Duran, Alicia I.. Pontificia Universidad Católica de Chile; ChileFil: Signorelli, Javier Walter. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Rosario. Instituto de Física de Rosario (i); ArgentinaFil: Celentano, Diego J.. Pontificia Universidad Católica de Chile; ChileFil: Cruchaga, Marcela. Universidad de Santiago de Chile; ChileFil: François, Manuel. Université de Technologie de Troyes; FranciaSpringer2015-03info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionhttp://purl.org/coar/resource_type/c_6501info:ar-repo/semantics/articuloapplication/pdfapplication/pdfhttp://hdl.handle.net/11336/6157Duran, Alicia I.; Signorelli, Javier Walter; Celentano, Diego J.; Cruchaga, Marcela; François, Manuel; Experimental and numerical analysis on the formability of a heat treated AA1100 aluminum alloy sheet; Springer; Journal of Materials Engineering and Performance; 24; 10; 3-2015; 4156-41701059-9495enginfo:eu-repo/semantics/altIdentifier/url/http://link.springer.com/article/10.1007%2Fs11665-015-1684-xinfo:eu-repo/semantics/altIdentifier/url/10.1007/s11665-015-1684-xinfo:eu-repo/semantics/altIdentifier/doi/10.1007/s11665-015-1684-xinfo:eu-repo/semantics/openAccesshttps://creativecommons.org/licenses/by-nc-sa/2.5/ar/reponame:CONICET Digital (CONICET)instname:Consejo Nacional de Investigaciones Científicas y Técnicas2025-10-15T14:48:51Zoai:ri.conicet.gov.ar:11336/6157instacron:CONICETInstitucionalhttp://ri.conicet.gov.ar/Organismo científico-tecnológicoNo correspondehttp://ri.conicet.gov.ar/oai/requestdasensio@conicet.gov.ar; lcarlino@conicet.gov.arArgentinaNo correspondeNo correspondeNo correspondeopendoar:34982025-10-15 14:48:51.338CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicasfalse
dc.title.none.fl_str_mv Experimental and numerical analysis on the formability of a heat treated AA1100 aluminum alloy sheet
title Experimental and numerical analysis on the formability of a heat treated AA1100 aluminum alloy sheet
spellingShingle Experimental and numerical analysis on the formability of a heat treated AA1100 aluminum alloy sheet
Duran, Alicia I.
Marciniak And Kuczynski
Sheet Formability
Viscoplastic Polycrystalline Self-Consistent (Vpsc) Model
title_short Experimental and numerical analysis on the formability of a heat treated AA1100 aluminum alloy sheet
title_full Experimental and numerical analysis on the formability of a heat treated AA1100 aluminum alloy sheet
title_fullStr Experimental and numerical analysis on the formability of a heat treated AA1100 aluminum alloy sheet
title_full_unstemmed Experimental and numerical analysis on the formability of a heat treated AA1100 aluminum alloy sheet
title_sort Experimental and numerical analysis on the formability of a heat treated AA1100 aluminum alloy sheet
dc.creator.none.fl_str_mv Duran, Alicia I.
Signorelli, Javier Walter
Celentano, Diego J.
Cruchaga, Marcela
François, Manuel
author Duran, Alicia I.
author_facet Duran, Alicia I.
Signorelli, Javier Walter
Celentano, Diego J.
Cruchaga, Marcela
François, Manuel
author_role author
author2 Signorelli, Javier Walter
Celentano, Diego J.
Cruchaga, Marcela
François, Manuel
author2_role author
author
author
author
dc.subject.none.fl_str_mv Marciniak And Kuczynski
Sheet Formability
Viscoplastic Polycrystalline Self-Consistent (Vpsc) Model
topic Marciniak And Kuczynski
Sheet Formability
Viscoplastic Polycrystalline Self-Consistent (Vpsc) Model
purl_subject.fl_str_mv https://purl.org/becyt/ford/2.5
https://purl.org/becyt/ford/2
dc.description.none.fl_txt_mv The objective of this work is to experimentally and numerically determine the influence of plastic anisotropy on the forming limit curve (FLC) for a heat-treated (300 C-1 h) AA1100 aluminum alloy sheet. The FLCs were obtained by the Nakajima test, where the anisotropy effect on the FLC was evaluated using hourglass-type samples taken at 0, 45, and 90 with respect to the sheet rolling direction. The effect of crystal orientations on the FLC is investigated using three micro-macro averaging schemes coupled to a Marciniak and Kuczynski (MK) analysis: the tangent viscoplastic self-consistent (VPSC), the tuned strength aVPSC, and the full-constraint Taylor model. The predicted limit strains in the left-hand side of the FLC agree well with experimental measurements along the three testing directions, while differences are found under biaxial stretching modes. Particularly, MK-VPSC predicts an unexpected limit strain profile in the right-hand side of the FLC for samples tested along the transverse direction. Only MK-aVPSC, with a tuning factor of 0.2, predicts satisfactorily the set of FLC measurements. Finally, the correlation of the predicted limit strains with the predicted yield surface by each model was also discussed.
Fil: Duran, Alicia I.. Pontificia Universidad Católica de Chile; Chile
Fil: Signorelli, Javier Walter. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Rosario. Instituto de Física de Rosario (i); Argentina
Fil: Celentano, Diego J.. Pontificia Universidad Católica de Chile; Chile
Fil: Cruchaga, Marcela. Universidad de Santiago de Chile; Chile
Fil: François, Manuel. Université de Technologie de Troyes; Francia
description The objective of this work is to experimentally and numerically determine the influence of plastic anisotropy on the forming limit curve (FLC) for a heat-treated (300 C-1 h) AA1100 aluminum alloy sheet. The FLCs were obtained by the Nakajima test, where the anisotropy effect on the FLC was evaluated using hourglass-type samples taken at 0, 45, and 90 with respect to the sheet rolling direction. The effect of crystal orientations on the FLC is investigated using three micro-macro averaging schemes coupled to a Marciniak and Kuczynski (MK) analysis: the tangent viscoplastic self-consistent (VPSC), the tuned strength aVPSC, and the full-constraint Taylor model. The predicted limit strains in the left-hand side of the FLC agree well with experimental measurements along the three testing directions, while differences are found under biaxial stretching modes. Particularly, MK-VPSC predicts an unexpected limit strain profile in the right-hand side of the FLC for samples tested along the transverse direction. Only MK-aVPSC, with a tuning factor of 0.2, predicts satisfactorily the set of FLC measurements. Finally, the correlation of the predicted limit strains with the predicted yield surface by each model was also discussed.
publishDate 2015
dc.date.none.fl_str_mv 2015-03
dc.type.none.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
http://purl.org/coar/resource_type/c_6501
info:ar-repo/semantics/articulo
format article
status_str publishedVersion
dc.identifier.none.fl_str_mv http://hdl.handle.net/11336/6157
Duran, Alicia I.; Signorelli, Javier Walter; Celentano, Diego J.; Cruchaga, Marcela; François, Manuel; Experimental and numerical analysis on the formability of a heat treated AA1100 aluminum alloy sheet; Springer; Journal of Materials Engineering and Performance; 24; 10; 3-2015; 4156-4170
1059-9495
url http://hdl.handle.net/11336/6157
identifier_str_mv Duran, Alicia I.; Signorelli, Javier Walter; Celentano, Diego J.; Cruchaga, Marcela; François, Manuel; Experimental and numerical analysis on the formability of a heat treated AA1100 aluminum alloy sheet; Springer; Journal of Materials Engineering and Performance; 24; 10; 3-2015; 4156-4170
1059-9495
dc.language.none.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv info:eu-repo/semantics/altIdentifier/url/http://link.springer.com/article/10.1007%2Fs11665-015-1684-x
info:eu-repo/semantics/altIdentifier/url/10.1007/s11665-015-1684-x
info:eu-repo/semantics/altIdentifier/doi/10.1007/s11665-015-1684-x
dc.rights.none.fl_str_mv info:eu-repo/semantics/openAccess
https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
eu_rights_str_mv openAccess
rights_invalid_str_mv https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
dc.format.none.fl_str_mv application/pdf
application/pdf
dc.publisher.none.fl_str_mv Springer
publisher.none.fl_str_mv Springer
dc.source.none.fl_str_mv reponame:CONICET Digital (CONICET)
instname:Consejo Nacional de Investigaciones Científicas y Técnicas
reponame_str CONICET Digital (CONICET)
collection CONICET Digital (CONICET)
instname_str Consejo Nacional de Investigaciones Científicas y Técnicas
repository.name.fl_str_mv CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicas
repository.mail.fl_str_mv dasensio@conicet.gov.ar; lcarlino@conicet.gov.ar
_version_ 1846083009937145856
score 13.221938

Publicaciones similares