Evaluation and modelling of integral capacitors produced by interdigitated comb electrodes

Autores
Ramajo, Leandro Alfredo; Ramajo, Damian Enrique; Reboredo, Maria Marta; Santiago, Diego Hernan; Castro, Miriam Susana
Año de publicación
2008
Idioma
inglés
Tipo de recurso
artículo
Estado
versión publicada
Descripción
Integral capacitors (IC) of one or two-layer printed wiring board (PWB) circuits were produced using comb electrodes fixtures and dielectric composites as the inter-electrode material. ICs were fabricated at laboratory scale, using copper comb electrodes and BaTiO3-epoxy composite materials deposited on a glass-Epoxy FR4 board. They were experimentally tested in order to obtain their electrical response. Furthermore, ICs behaviour was modelled through 2-dimensional models applying finite element method (FEM). Results showed that by this laboratory technique it was possible to obtained integral capacitors with low dielectric losses. Moreover, acceptable agreement was found between numerical and experimental capacitance results for all the different analysed ICs. In conclusion, 2D FEM models are a suitable tool to predict electric response of IC devices.
Fil: Ramajo, Leandro Alfredo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; Argentina
Fil: Ramajo, Damian Enrique. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Centro de Investigaciones en Métodos Computacionales. Universidad Nacional del Litoral. Centro de Investigaciones en Métodos Computacionales; Argentina
Fil: Reboredo, Maria Marta. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; Argentina
Fil: Santiago, Diego Hernan. Universidad Nacional de Mar del Plata. Facultad de Ingeniería; Argentina
Fil: Castro, Miriam Susana. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; Argentina
Materia
Integral capacitors
Dielectric composites
FEM
Nivel de accesibilidad
acceso abierto
Condiciones de uso
https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
Repositorio
CONICET Digital (CONICET)
Institución
Consejo Nacional de Investigaciones Científicas y Técnicas
OAI Identificador
oai:ri.conicet.gov.ar:11336/68046
Acceder
id CONICETDig_6806949bd2f193830ec5401018608699
oai_identifier_str oai:ri.conicet.gov.ar:11336/68046
network_acronym_str CONICETDig
repository_id_str 3498
network_name_str CONICET Digital (CONICET)
spelling Evaluation and modelling of integral capacitors produced by interdigitated comb electrodesRamajo, Leandro AlfredoRamajo, Damian EnriqueReboredo, Maria MartaSantiago, Diego HernanCastro, Miriam SusanaIntegral capacitorsDielectric compositesFEMhttps://purl.org/becyt/ford/2.5https://purl.org/becyt/ford/2Integral capacitors (IC) of one or two-layer printed wiring board (PWB) circuits were produced using comb electrodes fixtures and dielectric composites as the inter-electrode material. ICs were fabricated at laboratory scale, using copper comb electrodes and BaTiO3-epoxy composite materials deposited on a glass-Epoxy FR4 board. They were experimentally tested in order to obtain their electrical response. Furthermore, ICs behaviour was modelled through 2-dimensional models applying finite element method (FEM). Results showed that by this laboratory technique it was possible to obtained integral capacitors with low dielectric losses. Moreover, acceptable agreement was found between numerical and experimental capacitance results for all the different analysed ICs. In conclusion, 2D FEM models are a suitable tool to predict electric response of IC devices.Fil: Ramajo, Leandro Alfredo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaFil: Ramajo, Damian Enrique. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Centro de Investigaciones en Métodos Computacionales. Universidad Nacional del Litoral. Centro de Investigaciones en Métodos Computacionales; ArgentinaFil: Reboredo, Maria Marta. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaFil: Santiago, Diego Hernan. Universidad Nacional de Mar del Plata. Facultad de Ingeniería; ArgentinaFil: Castro, Miriam Susana. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaUniversidade Federal de São Carlos2008-12-10info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionhttp://purl.org/coar/resource_type/c_6501info:ar-repo/semantics/articuloapplication/pdfapplication/pdfapplication/pdfapplication/pdfhttp://hdl.handle.net/11336/68046Ramajo, Leandro Alfredo; Ramajo, Damian Enrique; Reboredo, Maria Marta; Santiago, Diego Hernan; Castro, Miriam Susana; Evaluation and modelling of integral capacitors produced by interdigitated comb electrodes; Universidade Federal de São Carlos; Materials Research; 11; 4; 10-12-2008; 471-4761516-14391980-5373CONICET DigitalCONICETenginfo:eu-repo/semantics/altIdentifier/url/http://ref.scielo.org/b9bh3vinfo:eu-repo/semantics/altIdentifier/doi/10.1590/S1516-14392008000400016info:eu-repo/semantics/openAccesshttps://creativecommons.org/licenses/by-nc-sa/2.5/ar/reponame:CONICET Digital (CONICET)instname:Consejo Nacional de Investigaciones Científicas y Técnicas2025-10-22T11:04:36Zoai:ri.conicet.gov.ar:11336/68046instacron:CONICETInstitucionalhttp://ri.conicet.gov.ar/Organismo científico-tecnológicoNo correspondehttp://ri.conicet.gov.ar/oai/requestdasensio@conicet.gov.ar; lcarlino@conicet.gov.arArgentinaNo correspondeNo correspondeNo correspondeopendoar:34982025-10-22 11:04:36.471CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicasfalse
dc.title.none.fl_str_mv Evaluation and modelling of integral capacitors produced by interdigitated comb electrodes
title Evaluation and modelling of integral capacitors produced by interdigitated comb electrodes
spellingShingle Evaluation and modelling of integral capacitors produced by interdigitated comb electrodes
Ramajo, Leandro Alfredo
Integral capacitors
Dielectric composites
FEM
title_short Evaluation and modelling of integral capacitors produced by interdigitated comb electrodes
title_full Evaluation and modelling of integral capacitors produced by interdigitated comb electrodes
title_fullStr Evaluation and modelling of integral capacitors produced by interdigitated comb electrodes
title_full_unstemmed Evaluation and modelling of integral capacitors produced by interdigitated comb electrodes
title_sort Evaluation and modelling of integral capacitors produced by interdigitated comb electrodes
dc.creator.none.fl_str_mv Ramajo, Leandro Alfredo
Ramajo, Damian Enrique
Reboredo, Maria Marta
Santiago, Diego Hernan
Castro, Miriam Susana
author Ramajo, Leandro Alfredo
author_facet Ramajo, Leandro Alfredo
Ramajo, Damian Enrique
Reboredo, Maria Marta
Santiago, Diego Hernan
Castro, Miriam Susana
author_role author
author2 Ramajo, Damian Enrique
Reboredo, Maria Marta
Santiago, Diego Hernan
Castro, Miriam Susana
author2_role author
author
author
author
dc.subject.none.fl_str_mv Integral capacitors
Dielectric composites
FEM
topic Integral capacitors
Dielectric composites
FEM
purl_subject.fl_str_mv https://purl.org/becyt/ford/2.5
https://purl.org/becyt/ford/2
dc.description.none.fl_txt_mv Integral capacitors (IC) of one or two-layer printed wiring board (PWB) circuits were produced using comb electrodes fixtures and dielectric composites as the inter-electrode material. ICs were fabricated at laboratory scale, using copper comb electrodes and BaTiO3-epoxy composite materials deposited on a glass-Epoxy FR4 board. They were experimentally tested in order to obtain their electrical response. Furthermore, ICs behaviour was modelled through 2-dimensional models applying finite element method (FEM). Results showed that by this laboratory technique it was possible to obtained integral capacitors with low dielectric losses. Moreover, acceptable agreement was found between numerical and experimental capacitance results for all the different analysed ICs. In conclusion, 2D FEM models are a suitable tool to predict electric response of IC devices.
Fil: Ramajo, Leandro Alfredo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; Argentina
Fil: Ramajo, Damian Enrique. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Centro de Investigaciones en Métodos Computacionales. Universidad Nacional del Litoral. Centro de Investigaciones en Métodos Computacionales; Argentina
Fil: Reboredo, Maria Marta. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; Argentina
Fil: Santiago, Diego Hernan. Universidad Nacional de Mar del Plata. Facultad de Ingeniería; Argentina
Fil: Castro, Miriam Susana. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; Argentina
description Integral capacitors (IC) of one or two-layer printed wiring board (PWB) circuits were produced using comb electrodes fixtures and dielectric composites as the inter-electrode material. ICs were fabricated at laboratory scale, using copper comb electrodes and BaTiO3-epoxy composite materials deposited on a glass-Epoxy FR4 board. They were experimentally tested in order to obtain their electrical response. Furthermore, ICs behaviour was modelled through 2-dimensional models applying finite element method (FEM). Results showed that by this laboratory technique it was possible to obtained integral capacitors with low dielectric losses. Moreover, acceptable agreement was found between numerical and experimental capacitance results for all the different analysed ICs. In conclusion, 2D FEM models are a suitable tool to predict electric response of IC devices.
publishDate 2008
dc.date.none.fl_str_mv 2008-12-10
dc.type.none.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
http://purl.org/coar/resource_type/c_6501
info:ar-repo/semantics/articulo
format article
status_str publishedVersion
dc.identifier.none.fl_str_mv http://hdl.handle.net/11336/68046
Ramajo, Leandro Alfredo; Ramajo, Damian Enrique; Reboredo, Maria Marta; Santiago, Diego Hernan; Castro, Miriam Susana; Evaluation and modelling of integral capacitors produced by interdigitated comb electrodes; Universidade Federal de São Carlos; Materials Research; 11; 4; 10-12-2008; 471-476
1516-1439
1980-5373
CONICET Digital
CONICET
url http://hdl.handle.net/11336/68046
identifier_str_mv Ramajo, Leandro Alfredo; Ramajo, Damian Enrique; Reboredo, Maria Marta; Santiago, Diego Hernan; Castro, Miriam Susana; Evaluation and modelling of integral capacitors produced by interdigitated comb electrodes; Universidade Federal de São Carlos; Materials Research; 11; 4; 10-12-2008; 471-476
1516-1439
1980-5373
CONICET Digital
CONICET
dc.language.none.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv info:eu-repo/semantics/altIdentifier/url/http://ref.scielo.org/b9bh3v
info:eu-repo/semantics/altIdentifier/doi/10.1590/S1516-14392008000400016
dc.rights.none.fl_str_mv info:eu-repo/semantics/openAccess
https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
eu_rights_str_mv openAccess
rights_invalid_str_mv https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
dc.format.none.fl_str_mv application/pdf
application/pdf
application/pdf
application/pdf
dc.publisher.none.fl_str_mv Universidade Federal de São Carlos
publisher.none.fl_str_mv Universidade Federal de São Carlos
dc.source.none.fl_str_mv reponame:CONICET Digital (CONICET)
instname:Consejo Nacional de Investigaciones Científicas y Técnicas
reponame_str CONICET Digital (CONICET)
collection CONICET Digital (CONICET)
instname_str Consejo Nacional de Investigaciones Científicas y Técnicas
repository.name.fl_str_mv CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicas
repository.mail.fl_str_mv dasensio@conicet.gov.ar; lcarlino@conicet.gov.ar
_version_ 1846781306894024704
score 12.982451

Publicaciones similares