External Weather Data Assimilation to Simulate Wind and Temperature Fields in the Region of Gualeguaychú, Argentina
- Autores
- Aguirre, Cesar Augusto; Berri, Guillermo Jorge; Brizuela, Armando Benito; Orcellet, Emiliana Elisabet
- Año de publicación
- 2014
- Idioma
- inglés
- Tipo de recurso
- artículo
- Estado
- versión publicada
- Descripción
- This work shows the comparison between the results of wind and temperature simulation and data weather measurements in low layers near Gualeguaychú City, Argentine, for 12 h in January 1, 2011. The model ARPS (advanced regional prediction system) with two options in the boundary conditions is used. In such conditions, wave-radiating open (radiative) with relaxation to the initial state were used while otherwise used absorbing boundary conditions data forced from MBLM (meso-scale boundary layer model) operational forecasters used by the National Weather Office. The results of both simulations are compared with data measured by three weather stations located around of the Uruguay River. As both simulations are initialized using the same data, there is a better agreement between the values obtained by forcing the boundary conditions for which are using “radiative” boundary conditions after 2 h physical time from the start of the simulation.
Fil: Aguirre, Cesar Augusto. Provincia de Entre Ríos. Centro de Investigaciones Científicas y Transferencia de Tecnología a la Producción. Universidad Autónoma de Entre Ríos. Centro de Investigaciones Científicas y Transferencia de Tecnología a la Producción. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Centro de Investigaciones Científicas y Transferencia de Tecnología a la Producción; Argentina
Fil: Berri, Guillermo Jorge. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Ministerio de Defensa. Secretaria de Planeamiento. Servicio Meteorológico Nacional; Argentina
Fil: Brizuela, Armando Benito. Provincia de Entre Ríos. Centro de Investigaciones Científicas y Transferencia de Tecnología a la Producción. Universidad Autónoma de Entre Ríos. Centro de Investigaciones Científicas y Transferencia de Tecnología a la Producción. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Centro de Investigaciones Científicas y Transferencia de Tecnología a la Producción; Argentina
Fil: Orcellet, Emiliana Elisabet. Ministerio de Defensa. Secretaria de Planeamiento. Servicio Meteorológico Nacional; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina - Materia
-
External boundary conditions assimilation
atmospheric boundary layer
large eddy simulation - Nivel de accesibilidad
- acceso abierto
- Condiciones de uso
- https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
- Repositorio
- Institución
- Consejo Nacional de Investigaciones Científicas y Técnicas
- OAI Identificador
- oai:ri.conicet.gov.ar:11336/103352
Ver los metadatos del registro completo
id |
CONICETDig_63488b55e7630d634fdeca2ab24e187e |
---|---|
oai_identifier_str |
oai:ri.conicet.gov.ar:11336/103352 |
network_acronym_str |
CONICETDig |
repository_id_str |
3498 |
network_name_str |
CONICET Digital (CONICET) |
spelling |
External Weather Data Assimilation to Simulate Wind and Temperature Fields in the Region of Gualeguaychú, ArgentinaAguirre, Cesar AugustoBerri, Guillermo JorgeBrizuela, Armando BenitoOrcellet, Emiliana ElisabetExternal boundary conditions assimilationatmospheric boundary layerlarge eddy simulationhttps://purl.org/becyt/ford/1.5https://purl.org/becyt/ford/1This work shows the comparison between the results of wind and temperature simulation and data weather measurements in low layers near Gualeguaychú City, Argentine, for 12 h in January 1, 2011. The model ARPS (advanced regional prediction system) with two options in the boundary conditions is used. In such conditions, wave-radiating open (radiative) with relaxation to the initial state were used while otherwise used absorbing boundary conditions data forced from MBLM (meso-scale boundary layer model) operational forecasters used by the National Weather Office. The results of both simulations are compared with data measured by three weather stations located around of the Uruguay River. As both simulations are initialized using the same data, there is a better agreement between the values obtained by forcing the boundary conditions for which are using “radiative” boundary conditions after 2 h physical time from the start of the simulation.Fil: Aguirre, Cesar Augusto. Provincia de Entre Ríos. Centro de Investigaciones Científicas y Transferencia de Tecnología a la Producción. Universidad Autónoma de Entre Ríos. Centro de Investigaciones Científicas y Transferencia de Tecnología a la Producción. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Centro de Investigaciones Científicas y Transferencia de Tecnología a la Producción; ArgentinaFil: Berri, Guillermo Jorge. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Ministerio de Defensa. Secretaria de Planeamiento. Servicio Meteorológico Nacional; ArgentinaFil: Brizuela, Armando Benito. Provincia de Entre Ríos. Centro de Investigaciones Científicas y Transferencia de Tecnología a la Producción. Universidad Autónoma de Entre Ríos. Centro de Investigaciones Científicas y Transferencia de Tecnología a la Producción. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Centro de Investigaciones Científicas y Transferencia de Tecnología a la Producción; ArgentinaFil: Orcellet, Emiliana Elisabet. Ministerio de Defensa. Secretaria de Planeamiento. Servicio Meteorológico Nacional; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaScientific & Academic Publishing Co2014-11info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionhttp://purl.org/coar/resource_type/c_6501info:ar-repo/semantics/articuloapplication/pdfapplication/pdfapplication/pdfapplication/pdfapplication/pdfhttp://hdl.handle.net/11336/103352Aguirre, Cesar Augusto; Berri, Guillermo Jorge; Brizuela, Armando Benito; Orcellet, Emiliana Elisabet; External Weather Data Assimilation to Simulate Wind and Temperature Fields in the Region of Gualeguaychú, Argentina; Scientific & Academic Publishing Co; Journal of Mechanical Engineering and Automation; 4; 11; 11-2014; 887-8992163-2413CONICET DigitalCONICETenginfo:eu-repo/semantics/altIdentifier/url/http://www.davidpublisher.org/Public/uploads/Contribute/5509138ac37fd.pdfinfo:eu-repo/semantics/openAccesshttps://creativecommons.org/licenses/by-nc-sa/2.5/ar/reponame:CONICET Digital (CONICET)instname:Consejo Nacional de Investigaciones Científicas y Técnicas2025-09-29T09:41:48Zoai:ri.conicet.gov.ar:11336/103352instacron:CONICETInstitucionalhttp://ri.conicet.gov.ar/Organismo científico-tecnológicoNo correspondehttp://ri.conicet.gov.ar/oai/requestdasensio@conicet.gov.ar; lcarlino@conicet.gov.arArgentinaNo correspondeNo correspondeNo correspondeopendoar:34982025-09-29 09:41:49.082CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicasfalse |
dc.title.none.fl_str_mv |
External Weather Data Assimilation to Simulate Wind and Temperature Fields in the Region of Gualeguaychú, Argentina |
title |
External Weather Data Assimilation to Simulate Wind and Temperature Fields in the Region of Gualeguaychú, Argentina |
spellingShingle |
External Weather Data Assimilation to Simulate Wind and Temperature Fields in the Region of Gualeguaychú, Argentina Aguirre, Cesar Augusto External boundary conditions assimilation atmospheric boundary layer large eddy simulation |
title_short |
External Weather Data Assimilation to Simulate Wind and Temperature Fields in the Region of Gualeguaychú, Argentina |
title_full |
External Weather Data Assimilation to Simulate Wind and Temperature Fields in the Region of Gualeguaychú, Argentina |
title_fullStr |
External Weather Data Assimilation to Simulate Wind and Temperature Fields in the Region of Gualeguaychú, Argentina |
title_full_unstemmed |
External Weather Data Assimilation to Simulate Wind and Temperature Fields in the Region of Gualeguaychú, Argentina |
title_sort |
External Weather Data Assimilation to Simulate Wind and Temperature Fields in the Region of Gualeguaychú, Argentina |
dc.creator.none.fl_str_mv |
Aguirre, Cesar Augusto Berri, Guillermo Jorge Brizuela, Armando Benito Orcellet, Emiliana Elisabet |
author |
Aguirre, Cesar Augusto |
author_facet |
Aguirre, Cesar Augusto Berri, Guillermo Jorge Brizuela, Armando Benito Orcellet, Emiliana Elisabet |
author_role |
author |
author2 |
Berri, Guillermo Jorge Brizuela, Armando Benito Orcellet, Emiliana Elisabet |
author2_role |
author author author |
dc.subject.none.fl_str_mv |
External boundary conditions assimilation atmospheric boundary layer large eddy simulation |
topic |
External boundary conditions assimilation atmospheric boundary layer large eddy simulation |
purl_subject.fl_str_mv |
https://purl.org/becyt/ford/1.5 https://purl.org/becyt/ford/1 |
dc.description.none.fl_txt_mv |
This work shows the comparison between the results of wind and temperature simulation and data weather measurements in low layers near Gualeguaychú City, Argentine, for 12 h in January 1, 2011. The model ARPS (advanced regional prediction system) with two options in the boundary conditions is used. In such conditions, wave-radiating open (radiative) with relaxation to the initial state were used while otherwise used absorbing boundary conditions data forced from MBLM (meso-scale boundary layer model) operational forecasters used by the National Weather Office. The results of both simulations are compared with data measured by three weather stations located around of the Uruguay River. As both simulations are initialized using the same data, there is a better agreement between the values obtained by forcing the boundary conditions for which are using “radiative” boundary conditions after 2 h physical time from the start of the simulation. Fil: Aguirre, Cesar Augusto. Provincia de Entre Ríos. Centro de Investigaciones Científicas y Transferencia de Tecnología a la Producción. Universidad Autónoma de Entre Ríos. Centro de Investigaciones Científicas y Transferencia de Tecnología a la Producción. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Centro de Investigaciones Científicas y Transferencia de Tecnología a la Producción; Argentina Fil: Berri, Guillermo Jorge. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Ministerio de Defensa. Secretaria de Planeamiento. Servicio Meteorológico Nacional; Argentina Fil: Brizuela, Armando Benito. Provincia de Entre Ríos. Centro de Investigaciones Científicas y Transferencia de Tecnología a la Producción. Universidad Autónoma de Entre Ríos. Centro de Investigaciones Científicas y Transferencia de Tecnología a la Producción. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Centro de Investigaciones Científicas y Transferencia de Tecnología a la Producción; Argentina Fil: Orcellet, Emiliana Elisabet. Ministerio de Defensa. Secretaria de Planeamiento. Servicio Meteorológico Nacional; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina |
description |
This work shows the comparison between the results of wind and temperature simulation and data weather measurements in low layers near Gualeguaychú City, Argentine, for 12 h in January 1, 2011. The model ARPS (advanced regional prediction system) with two options in the boundary conditions is used. In such conditions, wave-radiating open (radiative) with relaxation to the initial state were used while otherwise used absorbing boundary conditions data forced from MBLM (meso-scale boundary layer model) operational forecasters used by the National Weather Office. The results of both simulations are compared with data measured by three weather stations located around of the Uruguay River. As both simulations are initialized using the same data, there is a better agreement between the values obtained by forcing the boundary conditions for which are using “radiative” boundary conditions after 2 h physical time from the start of the simulation. |
publishDate |
2014 |
dc.date.none.fl_str_mv |
2014-11 |
dc.type.none.fl_str_mv |
info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion http://purl.org/coar/resource_type/c_6501 info:ar-repo/semantics/articulo |
format |
article |
status_str |
publishedVersion |
dc.identifier.none.fl_str_mv |
http://hdl.handle.net/11336/103352 Aguirre, Cesar Augusto; Berri, Guillermo Jorge; Brizuela, Armando Benito; Orcellet, Emiliana Elisabet; External Weather Data Assimilation to Simulate Wind and Temperature Fields in the Region of Gualeguaychú, Argentina; Scientific & Academic Publishing Co; Journal of Mechanical Engineering and Automation; 4; 11; 11-2014; 887-899 2163-2413 CONICET Digital CONICET |
url |
http://hdl.handle.net/11336/103352 |
identifier_str_mv |
Aguirre, Cesar Augusto; Berri, Guillermo Jorge; Brizuela, Armando Benito; Orcellet, Emiliana Elisabet; External Weather Data Assimilation to Simulate Wind and Temperature Fields in the Region of Gualeguaychú, Argentina; Scientific & Academic Publishing Co; Journal of Mechanical Engineering and Automation; 4; 11; 11-2014; 887-899 2163-2413 CONICET Digital CONICET |
dc.language.none.fl_str_mv |
eng |
language |
eng |
dc.relation.none.fl_str_mv |
info:eu-repo/semantics/altIdentifier/url/http://www.davidpublisher.org/Public/uploads/Contribute/5509138ac37fd.pdf |
dc.rights.none.fl_str_mv |
info:eu-repo/semantics/openAccess https://creativecommons.org/licenses/by-nc-sa/2.5/ar/ |
eu_rights_str_mv |
openAccess |
rights_invalid_str_mv |
https://creativecommons.org/licenses/by-nc-sa/2.5/ar/ |
dc.format.none.fl_str_mv |
application/pdf application/pdf application/pdf application/pdf application/pdf |
dc.publisher.none.fl_str_mv |
Scientific & Academic Publishing Co |
publisher.none.fl_str_mv |
Scientific & Academic Publishing Co |
dc.source.none.fl_str_mv |
reponame:CONICET Digital (CONICET) instname:Consejo Nacional de Investigaciones Científicas y Técnicas |
reponame_str |
CONICET Digital (CONICET) |
collection |
CONICET Digital (CONICET) |
instname_str |
Consejo Nacional de Investigaciones Científicas y Técnicas |
repository.name.fl_str_mv |
CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicas |
repository.mail.fl_str_mv |
dasensio@conicet.gov.ar; lcarlino@conicet.gov.ar |
_version_ |
1844613318475513856 |
score |
13.070432 |