Microfabrication and surface functionalization of soda lime glass through direct laser interference patterning

Autores
Soldera, Marcos Maximiliano; Alamri, Sabri; Sürmann, Paul Alexander; Kunze, Tim; Lasagni, Andrés Fabián
Año de publicación
2021
Idioma
inglés
Tipo de recurso
artículo
Estado
versión publicada
Descripción
All-purpose glasses are common in many established and emerging industries, such as microelectronics, photovoltaics, optical components, and biomedical devices due to their outstanding combination of mechanical, optical, thermal, and chemical properties. Surface functionalization through nano/micropatterning can further enhance glasses’ surface properties, expanding their applicability into new fields. Although laser structuring methods have been successfully employed on many absorbing materials, the processability of transparent materials with visible laser radiation has not been intensively studied, especially for producing structures smaller than 10 µm. Here, interference-based optical setups are used to directly pattern soda lime substrates through non-lineal absorption with ps-pulsed laser radiation in the visible spectrum. Line-and dot-like patterns are fabricated with spatial periods between 2.3 and 9.0 µm and aspect ratios up to 0.29. Furthermore, laserinduced periodic surface structures (LIPSS) with a feature size of approximately 300 nm are visible within these microstructures. The textured surfaces show significantly modified properties. Namely, the treated surfaces have an increased hydrophilic behavior, even reaching a super-hydrophilic state for some cases. In addition, the micropatterns act as relief diffraction gratings, which split incident light into diffraction modes. The process parameters were optimized to produce high-quality textures with super-hydrophilic properties and diffraction efficiencies above 30%.
Fil: Soldera, Marcos Maximiliano. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Patagonia Norte. Instituto de Investigación y Desarrollo en Ingeniería de Procesos, Biotecnología y Energías Alternativas. Universidad Nacional del Comahue. Instituto de Investigación y Desarrollo en Ingeniería de Procesos, Biotecnología y Energías Alternativas; Argentina
Fil: Alamri, Sabri. Fraunhofer Institute For Material And Beam Technology Iws; Alemania
Fil: Sürmann, Paul Alexander. Fraunhofer Institute For Material And Beam Technology Iws; Alemania
Fil: Kunze, Tim. Fraunhofer Institute For Material And Beam Technology Iws; Alemania
Fil: Lasagni, Andrés Fabián. Technische Universität Dresden; Alemania
Materia
DIFFRACTION GRATINGS
DIRECT LASER INTERFERENCE PATTERNING
GLASS MICRO-STRUCTURING
LASER-INDUCED PERIODIC SURFACE STRUCTURES
MULTI-PHOTON ABSORPTION
WETTABILITY
Nivel de accesibilidad
acceso abierto
Condiciones de uso
https://creativecommons.org/licenses/by/2.5/ar/
Repositorio
CONICET Digital (CONICET)
Institución
Consejo Nacional de Investigaciones Científicas y Técnicas
OAI Identificador
oai:ri.conicet.gov.ar:11336/183858

id CONICETDig_44b9d6dc9870325a2d38f24c5c0c7b3c
oai_identifier_str oai:ri.conicet.gov.ar:11336/183858
network_acronym_str CONICETDig
repository_id_str 3498
network_name_str CONICET Digital (CONICET)
spelling Microfabrication and surface functionalization of soda lime glass through direct laser interference patterningSoldera, Marcos MaximilianoAlamri, SabriSürmann, Paul AlexanderKunze, TimLasagni, Andrés FabiánDIFFRACTION GRATINGSDIRECT LASER INTERFERENCE PATTERNINGGLASS MICRO-STRUCTURINGLASER-INDUCED PERIODIC SURFACE STRUCTURESMULTI-PHOTON ABSORPTIONWETTABILITYhttps://purl.org/becyt/ford/2.5https://purl.org/becyt/ford/2All-purpose glasses are common in many established and emerging industries, such as microelectronics, photovoltaics, optical components, and biomedical devices due to their outstanding combination of mechanical, optical, thermal, and chemical properties. Surface functionalization through nano/micropatterning can further enhance glasses’ surface properties, expanding their applicability into new fields. Although laser structuring methods have been successfully employed on many absorbing materials, the processability of transparent materials with visible laser radiation has not been intensively studied, especially for producing structures smaller than 10 µm. Here, interference-based optical setups are used to directly pattern soda lime substrates through non-lineal absorption with ps-pulsed laser radiation in the visible spectrum. Line-and dot-like patterns are fabricated with spatial periods between 2.3 and 9.0 µm and aspect ratios up to 0.29. Furthermore, laserinduced periodic surface structures (LIPSS) with a feature size of approximately 300 nm are visible within these microstructures. The textured surfaces show significantly modified properties. Namely, the treated surfaces have an increased hydrophilic behavior, even reaching a super-hydrophilic state for some cases. In addition, the micropatterns act as relief diffraction gratings, which split incident light into diffraction modes. The process parameters were optimized to produce high-quality textures with super-hydrophilic properties and diffraction efficiencies above 30%.Fil: Soldera, Marcos Maximiliano. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Patagonia Norte. Instituto de Investigación y Desarrollo en Ingeniería de Procesos, Biotecnología y Energías Alternativas. Universidad Nacional del Comahue. Instituto de Investigación y Desarrollo en Ingeniería de Procesos, Biotecnología y Energías Alternativas; ArgentinaFil: Alamri, Sabri. Fraunhofer Institute For Material And Beam Technology Iws; AlemaniaFil: Sürmann, Paul Alexander. Fraunhofer Institute For Material And Beam Technology Iws; AlemaniaFil: Kunze, Tim. Fraunhofer Institute For Material And Beam Technology Iws; AlemaniaFil: Lasagni, Andrés Fabián. Technische Universität Dresden; AlemaniaMDPI AG2021-01info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionhttp://purl.org/coar/resource_type/c_6501info:ar-repo/semantics/articuloapplication/pdfapplication/pdfapplication/pdfhttp://hdl.handle.net/11336/183858Soldera, Marcos Maximiliano; Alamri, Sabri; Sürmann, Paul Alexander; Kunze, Tim; Lasagni, Andrés Fabián; Microfabrication and surface functionalization of soda lime glass through direct laser interference patterning; MDPI AG; Nanomaterials; 11; 1; 1-2021; 1-172079-4991CONICET DigitalCONICETenginfo:eu-repo/semantics/altIdentifier/doi/10.3390/nano11010129info:eu-repo/semantics/openAccesshttps://creativecommons.org/licenses/by/2.5/ar/reponame:CONICET Digital (CONICET)instname:Consejo Nacional de Investigaciones Científicas y Técnicas2025-09-29T10:10:59Zoai:ri.conicet.gov.ar:11336/183858instacron:CONICETInstitucionalhttp://ri.conicet.gov.ar/Organismo científico-tecnológicoNo correspondehttp://ri.conicet.gov.ar/oai/requestdasensio@conicet.gov.ar; lcarlino@conicet.gov.arArgentinaNo correspondeNo correspondeNo correspondeopendoar:34982025-09-29 10:11:00.202CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicasfalse
dc.title.none.fl_str_mv Microfabrication and surface functionalization of soda lime glass through direct laser interference patterning
title Microfabrication and surface functionalization of soda lime glass through direct laser interference patterning
spellingShingle Microfabrication and surface functionalization of soda lime glass through direct laser interference patterning
Soldera, Marcos Maximiliano
DIFFRACTION GRATINGS
DIRECT LASER INTERFERENCE PATTERNING
GLASS MICRO-STRUCTURING
LASER-INDUCED PERIODIC SURFACE STRUCTURES
MULTI-PHOTON ABSORPTION
WETTABILITY
title_short Microfabrication and surface functionalization of soda lime glass through direct laser interference patterning
title_full Microfabrication and surface functionalization of soda lime glass through direct laser interference patterning
title_fullStr Microfabrication and surface functionalization of soda lime glass through direct laser interference patterning
title_full_unstemmed Microfabrication and surface functionalization of soda lime glass through direct laser interference patterning
title_sort Microfabrication and surface functionalization of soda lime glass through direct laser interference patterning
dc.creator.none.fl_str_mv Soldera, Marcos Maximiliano
Alamri, Sabri
Sürmann, Paul Alexander
Kunze, Tim
Lasagni, Andrés Fabián
author Soldera, Marcos Maximiliano
author_facet Soldera, Marcos Maximiliano
Alamri, Sabri
Sürmann, Paul Alexander
Kunze, Tim
Lasagni, Andrés Fabián
author_role author
author2 Alamri, Sabri
Sürmann, Paul Alexander
Kunze, Tim
Lasagni, Andrés Fabián
author2_role author
author
author
author
dc.subject.none.fl_str_mv DIFFRACTION GRATINGS
DIRECT LASER INTERFERENCE PATTERNING
GLASS MICRO-STRUCTURING
LASER-INDUCED PERIODIC SURFACE STRUCTURES
MULTI-PHOTON ABSORPTION
WETTABILITY
topic DIFFRACTION GRATINGS
DIRECT LASER INTERFERENCE PATTERNING
GLASS MICRO-STRUCTURING
LASER-INDUCED PERIODIC SURFACE STRUCTURES
MULTI-PHOTON ABSORPTION
WETTABILITY
purl_subject.fl_str_mv https://purl.org/becyt/ford/2.5
https://purl.org/becyt/ford/2
dc.description.none.fl_txt_mv All-purpose glasses are common in many established and emerging industries, such as microelectronics, photovoltaics, optical components, and biomedical devices due to their outstanding combination of mechanical, optical, thermal, and chemical properties. Surface functionalization through nano/micropatterning can further enhance glasses’ surface properties, expanding their applicability into new fields. Although laser structuring methods have been successfully employed on many absorbing materials, the processability of transparent materials with visible laser radiation has not been intensively studied, especially for producing structures smaller than 10 µm. Here, interference-based optical setups are used to directly pattern soda lime substrates through non-lineal absorption with ps-pulsed laser radiation in the visible spectrum. Line-and dot-like patterns are fabricated with spatial periods between 2.3 and 9.0 µm and aspect ratios up to 0.29. Furthermore, laserinduced periodic surface structures (LIPSS) with a feature size of approximately 300 nm are visible within these microstructures. The textured surfaces show significantly modified properties. Namely, the treated surfaces have an increased hydrophilic behavior, even reaching a super-hydrophilic state for some cases. In addition, the micropatterns act as relief diffraction gratings, which split incident light into diffraction modes. The process parameters were optimized to produce high-quality textures with super-hydrophilic properties and diffraction efficiencies above 30%.
Fil: Soldera, Marcos Maximiliano. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Patagonia Norte. Instituto de Investigación y Desarrollo en Ingeniería de Procesos, Biotecnología y Energías Alternativas. Universidad Nacional del Comahue. Instituto de Investigación y Desarrollo en Ingeniería de Procesos, Biotecnología y Energías Alternativas; Argentina
Fil: Alamri, Sabri. Fraunhofer Institute For Material And Beam Technology Iws; Alemania
Fil: Sürmann, Paul Alexander. Fraunhofer Institute For Material And Beam Technology Iws; Alemania
Fil: Kunze, Tim. Fraunhofer Institute For Material And Beam Technology Iws; Alemania
Fil: Lasagni, Andrés Fabián. Technische Universität Dresden; Alemania
description All-purpose glasses are common in many established and emerging industries, such as microelectronics, photovoltaics, optical components, and biomedical devices due to their outstanding combination of mechanical, optical, thermal, and chemical properties. Surface functionalization through nano/micropatterning can further enhance glasses’ surface properties, expanding their applicability into new fields. Although laser structuring methods have been successfully employed on many absorbing materials, the processability of transparent materials with visible laser radiation has not been intensively studied, especially for producing structures smaller than 10 µm. Here, interference-based optical setups are used to directly pattern soda lime substrates through non-lineal absorption with ps-pulsed laser radiation in the visible spectrum. Line-and dot-like patterns are fabricated with spatial periods between 2.3 and 9.0 µm and aspect ratios up to 0.29. Furthermore, laserinduced periodic surface structures (LIPSS) with a feature size of approximately 300 nm are visible within these microstructures. The textured surfaces show significantly modified properties. Namely, the treated surfaces have an increased hydrophilic behavior, even reaching a super-hydrophilic state for some cases. In addition, the micropatterns act as relief diffraction gratings, which split incident light into diffraction modes. The process parameters were optimized to produce high-quality textures with super-hydrophilic properties and diffraction efficiencies above 30%.
publishDate 2021
dc.date.none.fl_str_mv 2021-01
dc.type.none.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
http://purl.org/coar/resource_type/c_6501
info:ar-repo/semantics/articulo
format article
status_str publishedVersion
dc.identifier.none.fl_str_mv http://hdl.handle.net/11336/183858
Soldera, Marcos Maximiliano; Alamri, Sabri; Sürmann, Paul Alexander; Kunze, Tim; Lasagni, Andrés Fabián; Microfabrication and surface functionalization of soda lime glass through direct laser interference patterning; MDPI AG; Nanomaterials; 11; 1; 1-2021; 1-17
2079-4991
CONICET Digital
CONICET
url http://hdl.handle.net/11336/183858
identifier_str_mv Soldera, Marcos Maximiliano; Alamri, Sabri; Sürmann, Paul Alexander; Kunze, Tim; Lasagni, Andrés Fabián; Microfabrication and surface functionalization of soda lime glass through direct laser interference patterning; MDPI AG; Nanomaterials; 11; 1; 1-2021; 1-17
2079-4991
CONICET Digital
CONICET
dc.language.none.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv info:eu-repo/semantics/altIdentifier/doi/10.3390/nano11010129
dc.rights.none.fl_str_mv info:eu-repo/semantics/openAccess
https://creativecommons.org/licenses/by/2.5/ar/
eu_rights_str_mv openAccess
rights_invalid_str_mv https://creativecommons.org/licenses/by/2.5/ar/
dc.format.none.fl_str_mv application/pdf
application/pdf
application/pdf
dc.publisher.none.fl_str_mv MDPI AG
publisher.none.fl_str_mv MDPI AG
dc.source.none.fl_str_mv reponame:CONICET Digital (CONICET)
instname:Consejo Nacional de Investigaciones Científicas y Técnicas
reponame_str CONICET Digital (CONICET)
collection CONICET Digital (CONICET)
instname_str Consejo Nacional de Investigaciones Científicas y Técnicas
repository.name.fl_str_mv CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicas
repository.mail.fl_str_mv dasensio@conicet.gov.ar; lcarlino@conicet.gov.ar
_version_ 1844614004952006656
score 13.070432