Manufacture of green-composite sandwich structures with basalt fiber and bioepoxy resin

Autores
Torres, Juan Pablo; Hoto, René; Andrés, J.; García Manrique, Juan Antonio
Año de publicación
2013
Idioma
inglés
Tipo de recurso
artículo
Estado
versión publicada
Descripción
Nowadays, there is a growing interest for the use and development of materials synthesized from renewable sources in the polymer composites manufacturing industry; this applies for both matrix and reinforcement components. In the present research, a novel basalt fibre reinforced (BFR) bioepoxy green composite is proposed as an environmentally friendly alternative to traditional petroleum-derived composites. In addition, this material system was combined with cork as core material for the fabrication of fibre composite sandwich structures. Mechanical properties of both skin and core materials were assessed through flexural and tensile tests. Finite element (FEM) simulations for the mechanical stress analysis of the sandwich material were carried out, and a maximum allowable shear stress for material failure under bending loads was established. Permeability measurements of the basalt fabrics were carried out in order to perform numerical simulations of liquid composite moulding (LCM) processes on the PAM-RTM software. The proposed green-composite sandwich material was used for the fabrication of a longboard as a case study for a sports equipment application. Numerical simulations of the mould filling stage allowed the determination of an optimal mould filling strategy. Finally, the load-bearing capacity of the board was studied by means of FEM simulations, and the presented design proved to be acceptable for service.
Fil: Torres, Juan Pablo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Mar del Plata. Instituto de Investigación en Ciencia y Tecnología de Materiales (i); Argentina. Universidad Nacional de Mar del Plata. Facultad de Ingenieria; Argentina
Fil: Hoto, René. Universidad Politecnica de Valencia; España;
Fil: Andrés, J.. Universitat Jaume I; España
Fil: García Manrique, Juan Antonio. Universidad Politecnica de Valencia; España;
Materia
Green-Composite
Basalt Fibers
Bioepoxy
Finite Element Method
Nivel de accesibilidad
acceso abierto
Condiciones de uso
Atribución-NoComercial-CompartirIgual 2.5 Argentina (CC BY-NC-SA 2.5 AR)
Repositorio
CONICET Digital (CONICET)
Institución
Consejo Nacional de Investigaciones Científicas y Técnicas
OAI Identificador
oai:ri.conicet.gov.ar:11336/2521
Acceder
id CONICETDig_373a610c2dd982980f56f9c4894f4351
oai_identifier_str oai:ri.conicet.gov.ar:11336/2521
network_acronym_str CONICETDig
repository_id_str 3498
network_name_str CONICET Digital (CONICET)
spelling Manufacture of green-composite sandwich structures with basalt fiber and bioepoxy resinTorres, Juan PabloHoto, RenéAndrés, J.García Manrique, Juan AntonioGreen-CompositeBasalt FibersBioepoxyFinite Element Methodhttps://purl.org/becyt/ford/2.5https://purl.org/becyt/ford/2https://purl.org/becyt/ford/1.4https://purl.org/becyt/ford/1https://purl.org/becyt/ford/2.9https://purl.org/becyt/ford/2Nowadays, there is a growing interest for the use and development of materials synthesized from renewable sources in the polymer composites manufacturing industry; this applies for both matrix and reinforcement components. In the present research, a novel basalt fibre reinforced (BFR) bioepoxy green composite is proposed as an environmentally friendly alternative to traditional petroleum-derived composites. In addition, this material system was combined with cork as core material for the fabrication of fibre composite sandwich structures. Mechanical properties of both skin and core materials were assessed through flexural and tensile tests. Finite element (FEM) simulations for the mechanical stress analysis of the sandwich material were carried out, and a maximum allowable shear stress for material failure under bending loads was established. Permeability measurements of the basalt fabrics were carried out in order to perform numerical simulations of liquid composite moulding (LCM) processes on the PAM-RTM software. The proposed green-composite sandwich material was used for the fabrication of a longboard as a case study for a sports equipment application. Numerical simulations of the mould filling stage allowed the determination of an optimal mould filling strategy. Finally, the load-bearing capacity of the board was studied by means of FEM simulations, and the presented design proved to be acceptable for service.Fil: Torres, Juan Pablo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Mar del Plata. Instituto de Investigación en Ciencia y Tecnología de Materiales (i); Argentina. Universidad Nacional de Mar del Plata. Facultad de Ingenieria; ArgentinaFil: Hoto, René. Universidad Politecnica de Valencia; España;Fil: Andrés, J.. Universitat Jaume I; EspañaFil: García Manrique, Juan Antonio. Universidad Politecnica de Valencia; España;Hindawi Publishing Corporation2013-05-07info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionhttp://purl.org/coar/resource_type/c_6501info:ar-repo/semantics/articuloapplication/pdfapplication/pdfhttp://hdl.handle.net/11336/2521Torres, Juan Pablo; Hoto, René; Andrés, J.; García Manrique, Juan Antonio; Manufacture of green-composite sandwich structures with basalt fiber and bioepoxy resin; Hindawi Publishing Corporation; Advances in Materials Science and Engineering; 2013; 7-5-2013; 1-91687-8434enginfo:eu-repo/semantics/altIdentifier/url/http://www.hindawi.com/journals/amse/2013/214506/info:eu-repo/semantics/altIdentifier/doi/10.1155/2013/214506info:eu-repo/semantics/openAccessAtribución-NoComercial-CompartirIgual 2.5 Argentina (CC BY-NC-SA 2.5 AR)https://creativecommons.org/licenses/by-nc-sa/2.5/ar/reponame:CONICET Digital (CONICET)instname:Consejo Nacional de Investigaciones Científicas y Técnicas2025-09-29T09:39:15Zoai:ri.conicet.gov.ar:11336/2521instacron:CONICETInstitucionalhttp://ri.conicet.gov.ar/Organismo científico-tecnológicoNo correspondehttp://ri.conicet.gov.ar/oai/requestdasensio@conicet.gov.ar; lcarlino@conicet.gov.arArgentinaNo correspondeNo correspondeNo correspondeopendoar:34982025-09-29 09:39:15.477CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicasfalse
dc.title.none.fl_str_mv Manufacture of green-composite sandwich structures with basalt fiber and bioepoxy resin
title Manufacture of green-composite sandwich structures with basalt fiber and bioepoxy resin
spellingShingle Manufacture of green-composite sandwich structures with basalt fiber and bioepoxy resin
Torres, Juan Pablo
Green-Composite
Basalt Fibers
Bioepoxy
Finite Element Method
title_short Manufacture of green-composite sandwich structures with basalt fiber and bioepoxy resin
title_full Manufacture of green-composite sandwich structures with basalt fiber and bioepoxy resin
title_fullStr Manufacture of green-composite sandwich structures with basalt fiber and bioepoxy resin
title_full_unstemmed Manufacture of green-composite sandwich structures with basalt fiber and bioepoxy resin
title_sort Manufacture of green-composite sandwich structures with basalt fiber and bioepoxy resin
dc.creator.none.fl_str_mv Torres, Juan Pablo
Hoto, René
Andrés, J.
García Manrique, Juan Antonio
author Torres, Juan Pablo
author_facet Torres, Juan Pablo
Hoto, René
Andrés, J.
García Manrique, Juan Antonio
author_role author
author2 Hoto, René
Andrés, J.
García Manrique, Juan Antonio
author2_role author
author
author
dc.subject.none.fl_str_mv Green-Composite
Basalt Fibers
Bioepoxy
Finite Element Method
topic Green-Composite
Basalt Fibers
Bioepoxy
Finite Element Method
purl_subject.fl_str_mv https://purl.org/becyt/ford/2.5
https://purl.org/becyt/ford/2
https://purl.org/becyt/ford/1.4
https://purl.org/becyt/ford/1
https://purl.org/becyt/ford/2.9
https://purl.org/becyt/ford/2
dc.description.none.fl_txt_mv Nowadays, there is a growing interest for the use and development of materials synthesized from renewable sources in the polymer composites manufacturing industry; this applies for both matrix and reinforcement components. In the present research, a novel basalt fibre reinforced (BFR) bioepoxy green composite is proposed as an environmentally friendly alternative to traditional petroleum-derived composites. In addition, this material system was combined with cork as core material for the fabrication of fibre composite sandwich structures. Mechanical properties of both skin and core materials were assessed through flexural and tensile tests. Finite element (FEM) simulations for the mechanical stress analysis of the sandwich material were carried out, and a maximum allowable shear stress for material failure under bending loads was established. Permeability measurements of the basalt fabrics were carried out in order to perform numerical simulations of liquid composite moulding (LCM) processes on the PAM-RTM software. The proposed green-composite sandwich material was used for the fabrication of a longboard as a case study for a sports equipment application. Numerical simulations of the mould filling stage allowed the determination of an optimal mould filling strategy. Finally, the load-bearing capacity of the board was studied by means of FEM simulations, and the presented design proved to be acceptable for service.
Fil: Torres, Juan Pablo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Mar del Plata. Instituto de Investigación en Ciencia y Tecnología de Materiales (i); Argentina. Universidad Nacional de Mar del Plata. Facultad de Ingenieria; Argentina
Fil: Hoto, René. Universidad Politecnica de Valencia; España;
Fil: Andrés, J.. Universitat Jaume I; España
Fil: García Manrique, Juan Antonio. Universidad Politecnica de Valencia; España;
description Nowadays, there is a growing interest for the use and development of materials synthesized from renewable sources in the polymer composites manufacturing industry; this applies for both matrix and reinforcement components. In the present research, a novel basalt fibre reinforced (BFR) bioepoxy green composite is proposed as an environmentally friendly alternative to traditional petroleum-derived composites. In addition, this material system was combined with cork as core material for the fabrication of fibre composite sandwich structures. Mechanical properties of both skin and core materials were assessed through flexural and tensile tests. Finite element (FEM) simulations for the mechanical stress analysis of the sandwich material were carried out, and a maximum allowable shear stress for material failure under bending loads was established. Permeability measurements of the basalt fabrics were carried out in order to perform numerical simulations of liquid composite moulding (LCM) processes on the PAM-RTM software. The proposed green-composite sandwich material was used for the fabrication of a longboard as a case study for a sports equipment application. Numerical simulations of the mould filling stage allowed the determination of an optimal mould filling strategy. Finally, the load-bearing capacity of the board was studied by means of FEM simulations, and the presented design proved to be acceptable for service.
publishDate 2013
dc.date.none.fl_str_mv 2013-05-07
dc.type.none.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
http://purl.org/coar/resource_type/c_6501
info:ar-repo/semantics/articulo
format article
status_str publishedVersion
dc.identifier.none.fl_str_mv http://hdl.handle.net/11336/2521
Torres, Juan Pablo; Hoto, René; Andrés, J.; García Manrique, Juan Antonio; Manufacture of green-composite sandwich structures with basalt fiber and bioepoxy resin; Hindawi Publishing Corporation; Advances in Materials Science and Engineering; 2013; 7-5-2013; 1-9
1687-8434
url http://hdl.handle.net/11336/2521
identifier_str_mv Torres, Juan Pablo; Hoto, René; Andrés, J.; García Manrique, Juan Antonio; Manufacture of green-composite sandwich structures with basalt fiber and bioepoxy resin; Hindawi Publishing Corporation; Advances in Materials Science and Engineering; 2013; 7-5-2013; 1-9
1687-8434
dc.language.none.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv info:eu-repo/semantics/altIdentifier/url/http://www.hindawi.com/journals/amse/2013/214506/
info:eu-repo/semantics/altIdentifier/doi/10.1155/2013/214506
dc.rights.none.fl_str_mv info:eu-repo/semantics/openAccess
Atribución-NoComercial-CompartirIgual 2.5 Argentina (CC BY-NC-SA 2.5 AR)
https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
eu_rights_str_mv openAccess
rights_invalid_str_mv Atribución-NoComercial-CompartirIgual 2.5 Argentina (CC BY-NC-SA 2.5 AR)
https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
dc.format.none.fl_str_mv application/pdf
application/pdf
dc.publisher.none.fl_str_mv Hindawi Publishing Corporation
publisher.none.fl_str_mv Hindawi Publishing Corporation
dc.source.none.fl_str_mv reponame:CONICET Digital (CONICET)
instname:Consejo Nacional de Investigaciones Científicas y Técnicas
reponame_str CONICET Digital (CONICET)
collection CONICET Digital (CONICET)
instname_str Consejo Nacional de Investigaciones Científicas y Técnicas
repository.name.fl_str_mv CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicas
repository.mail.fl_str_mv dasensio@conicet.gov.ar; lcarlino@conicet.gov.ar
_version_ 1844613241726042112
score 13.070432

Publicaciones similares