Mechanical and processing properties of recycled PET and LDPE-HDPE composite materials for building components

Autores
Gonzalez Laria, Julian; Gaggino, Rosana; Kreiker, Jeronimo Rafael; Peisino, Lucas Ernesto; Positieri, María Josefina; Cappelletti, Ariel Leonardo
Año de publicación
2020
Idioma
inglés
Tipo de recurso
artículo
Estado
versión publicada
Descripción
Although several reports can be found in the literature about the recycling of plastic materials, only a few focus on recovering and molding them in a new process. Plastic material blends can be fabricated using several techniques, which allows the molding of a compound adaptable to each needed performance. This fact favors the recycling by allowing the use of mixed wastes without major processes, avoiding expensive treatments. This research work analyzes the mechanical properties of a material conformed by 100% recycled plastics: polyethylene terephthalate and low-/high-density polyethylene without previous separation or washing and drying pretreatments. Its macro and microscopic structure was studied and described, and formulations of different compound rates were analyzed. Mechanical resistance was around 60% of a material composed of virgin materials in compressive, flexural, and tensile strength tests. Its potential application to building components manufacture is analyzed.
Fil: Gonzalez Laria, Julian. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Centro Experimental de la Vivienda Económica; Argentina
Fil: Gaggino, Rosana. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Centro Experimental de la Vivienda Económica; Argentina
Fil: Kreiker, Jeronimo Rafael. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Centro Experimental de la Vivienda Económica; Argentina
Fil: Peisino, Lucas Ernesto. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Centro Experimental de la Vivienda Económica; Argentina
Fil: Positieri, María Josefina. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Grupo de Investigación En Tecnologías de Materiales y Calidad; Argentina
Fil: Cappelletti, Ariel Leonardo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Centro Experimental de la Vivienda Económica; Argentina
Materia
BUILDING COMPONENTS
COMPOSITE MATERIAL
RECYCLED PLASTIC
Nivel de accesibilidad
acceso abierto
Condiciones de uso
https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
Repositorio
CONICET Digital (CONICET)
Institución
Consejo Nacional de Investigaciones Científicas y Técnicas
OAI Identificador
oai:ri.conicet.gov.ar:11336/137393
Acceder
id CONICETDig_09657303aef4b7ad7bf93358a396ec6b
oai_identifier_str oai:ri.conicet.gov.ar:11336/137393
network_acronym_str CONICETDig
repository_id_str 3498
network_name_str CONICET Digital (CONICET)
spelling Mechanical and processing properties of recycled PET and LDPE-HDPE composite materials for building componentsGonzalez Laria, JulianGaggino, RosanaKreiker, Jeronimo RafaelPeisino, Lucas ErnestoPositieri, María JosefinaCappelletti, Ariel LeonardoBUILDING COMPONENTSCOMPOSITE MATERIALRECYCLED PLASTIChttps://purl.org/becyt/ford/2.5https://purl.org/becyt/ford/2Although several reports can be found in the literature about the recycling of plastic materials, only a few focus on recovering and molding them in a new process. Plastic material blends can be fabricated using several techniques, which allows the molding of a compound adaptable to each needed performance. This fact favors the recycling by allowing the use of mixed wastes without major processes, avoiding expensive treatments. This research work analyzes the mechanical properties of a material conformed by 100% recycled plastics: polyethylene terephthalate and low-/high-density polyethylene without previous separation or washing and drying pretreatments. Its macro and microscopic structure was studied and described, and formulations of different compound rates were analyzed. Mechanical resistance was around 60% of a material composed of virgin materials in compressive, flexural, and tensile strength tests. Its potential application to building components manufacture is analyzed.Fil: Gonzalez Laria, Julian. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Centro Experimental de la Vivienda Económica; ArgentinaFil: Gaggino, Rosana. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Centro Experimental de la Vivienda Económica; ArgentinaFil: Kreiker, Jeronimo Rafael. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Centro Experimental de la Vivienda Económica; ArgentinaFil: Peisino, Lucas Ernesto. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Centro Experimental de la Vivienda Económica; ArgentinaFil: Positieri, María Josefina. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Grupo de Investigación En Tecnologías de Materiales y Calidad; ArgentinaFil: Cappelletti, Ariel Leonardo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Centro Experimental de la Vivienda Económica; ArgentinaSage Publications Ltd2020-07-21info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionhttp://purl.org/coar/resource_type/c_6501info:ar-repo/semantics/articuloapplication/pdfapplication/pdfapplication/pdfhttp://hdl.handle.net/11336/137393Gonzalez Laria, Julian; Gaggino, Rosana; Kreiker, Jeronimo Rafael; Peisino, Lucas Ernesto; Positieri, María Josefina; et al.; Mechanical and processing properties of recycled PET and LDPE-HDPE composite materials for building components; Sage Publications Ltd; Journal of Thermoplastic Composite Materials; 21-7-2020; 1-140892-70571530-7980CONICET DigitalCONICETenginfo:eu-repo/semantics/altIdentifier/url/https://journals.sagepub.com/doi/full/10.1177/0892705720939141info:eu-repo/semantics/altIdentifier/doi/10.1177/0892705720939141info:eu-repo/semantics/openAccesshttps://creativecommons.org/licenses/by-nc-sa/2.5/ar/reponame:CONICET Digital (CONICET)instname:Consejo Nacional de Investigaciones Científicas y Técnicas2025-10-22T11:08:06Zoai:ri.conicet.gov.ar:11336/137393instacron:CONICETInstitucionalhttp://ri.conicet.gov.ar/Organismo científico-tecnológicoNo correspondehttp://ri.conicet.gov.ar/oai/requestdasensio@conicet.gov.ar; lcarlino@conicet.gov.arArgentinaNo correspondeNo correspondeNo correspondeopendoar:34982025-10-22 11:08:07.157CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicasfalse
dc.title.none.fl_str_mv Mechanical and processing properties of recycled PET and LDPE-HDPE composite materials for building components
title Mechanical and processing properties of recycled PET and LDPE-HDPE composite materials for building components
spellingShingle Mechanical and processing properties of recycled PET and LDPE-HDPE composite materials for building components
Gonzalez Laria, Julian
BUILDING COMPONENTS
COMPOSITE MATERIAL
RECYCLED PLASTIC
title_short Mechanical and processing properties of recycled PET and LDPE-HDPE composite materials for building components
title_full Mechanical and processing properties of recycled PET and LDPE-HDPE composite materials for building components
title_fullStr Mechanical and processing properties of recycled PET and LDPE-HDPE composite materials for building components
title_full_unstemmed Mechanical and processing properties of recycled PET and LDPE-HDPE composite materials for building components
title_sort Mechanical and processing properties of recycled PET and LDPE-HDPE composite materials for building components
dc.creator.none.fl_str_mv Gonzalez Laria, Julian
Gaggino, Rosana
Kreiker, Jeronimo Rafael
Peisino, Lucas Ernesto
Positieri, María Josefina
Cappelletti, Ariel Leonardo
author Gonzalez Laria, Julian
author_facet Gonzalez Laria, Julian
Gaggino, Rosana
Kreiker, Jeronimo Rafael
Peisino, Lucas Ernesto
Positieri, María Josefina
Cappelletti, Ariel Leonardo
author_role author
author2 Gaggino, Rosana
Kreiker, Jeronimo Rafael
Peisino, Lucas Ernesto
Positieri, María Josefina
Cappelletti, Ariel Leonardo
author2_role author
author
author
author
author
dc.subject.none.fl_str_mv BUILDING COMPONENTS
COMPOSITE MATERIAL
RECYCLED PLASTIC
topic BUILDING COMPONENTS
COMPOSITE MATERIAL
RECYCLED PLASTIC
purl_subject.fl_str_mv https://purl.org/becyt/ford/2.5
https://purl.org/becyt/ford/2
dc.description.none.fl_txt_mv Although several reports can be found in the literature about the recycling of plastic materials, only a few focus on recovering and molding them in a new process. Plastic material blends can be fabricated using several techniques, which allows the molding of a compound adaptable to each needed performance. This fact favors the recycling by allowing the use of mixed wastes without major processes, avoiding expensive treatments. This research work analyzes the mechanical properties of a material conformed by 100% recycled plastics: polyethylene terephthalate and low-/high-density polyethylene without previous separation or washing and drying pretreatments. Its macro and microscopic structure was studied and described, and formulations of different compound rates were analyzed. Mechanical resistance was around 60% of a material composed of virgin materials in compressive, flexural, and tensile strength tests. Its potential application to building components manufacture is analyzed.
Fil: Gonzalez Laria, Julian. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Centro Experimental de la Vivienda Económica; Argentina
Fil: Gaggino, Rosana. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Centro Experimental de la Vivienda Económica; Argentina
Fil: Kreiker, Jeronimo Rafael. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Centro Experimental de la Vivienda Económica; Argentina
Fil: Peisino, Lucas Ernesto. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Centro Experimental de la Vivienda Económica; Argentina
Fil: Positieri, María Josefina. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Grupo de Investigación En Tecnologías de Materiales y Calidad; Argentina
Fil: Cappelletti, Ariel Leonardo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Centro Experimental de la Vivienda Económica; Argentina
description Although several reports can be found in the literature about the recycling of plastic materials, only a few focus on recovering and molding them in a new process. Plastic material blends can be fabricated using several techniques, which allows the molding of a compound adaptable to each needed performance. This fact favors the recycling by allowing the use of mixed wastes without major processes, avoiding expensive treatments. This research work analyzes the mechanical properties of a material conformed by 100% recycled plastics: polyethylene terephthalate and low-/high-density polyethylene without previous separation or washing and drying pretreatments. Its macro and microscopic structure was studied and described, and formulations of different compound rates were analyzed. Mechanical resistance was around 60% of a material composed of virgin materials in compressive, flexural, and tensile strength tests. Its potential application to building components manufacture is analyzed.
publishDate 2020
dc.date.none.fl_str_mv 2020-07-21
dc.type.none.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
http://purl.org/coar/resource_type/c_6501
info:ar-repo/semantics/articulo
format article
status_str publishedVersion
dc.identifier.none.fl_str_mv http://hdl.handle.net/11336/137393
Gonzalez Laria, Julian; Gaggino, Rosana; Kreiker, Jeronimo Rafael; Peisino, Lucas Ernesto; Positieri, María Josefina; et al.; Mechanical and processing properties of recycled PET and LDPE-HDPE composite materials for building components; Sage Publications Ltd; Journal of Thermoplastic Composite Materials; 21-7-2020; 1-14
0892-7057
1530-7980
CONICET Digital
CONICET
url http://hdl.handle.net/11336/137393
identifier_str_mv Gonzalez Laria, Julian; Gaggino, Rosana; Kreiker, Jeronimo Rafael; Peisino, Lucas Ernesto; Positieri, María Josefina; et al.; Mechanical and processing properties of recycled PET and LDPE-HDPE composite materials for building components; Sage Publications Ltd; Journal of Thermoplastic Composite Materials; 21-7-2020; 1-14
0892-7057
1530-7980
CONICET Digital
CONICET
dc.language.none.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv info:eu-repo/semantics/altIdentifier/url/https://journals.sagepub.com/doi/full/10.1177/0892705720939141
info:eu-repo/semantics/altIdentifier/doi/10.1177/0892705720939141
dc.rights.none.fl_str_mv info:eu-repo/semantics/openAccess
https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
eu_rights_str_mv openAccess
rights_invalid_str_mv https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
dc.format.none.fl_str_mv application/pdf
application/pdf
application/pdf
dc.publisher.none.fl_str_mv Sage Publications Ltd
publisher.none.fl_str_mv Sage Publications Ltd
dc.source.none.fl_str_mv reponame:CONICET Digital (CONICET)
instname:Consejo Nacional de Investigaciones Científicas y Técnicas
reponame_str CONICET Digital (CONICET)
collection CONICET Digital (CONICET)
instname_str Consejo Nacional de Investigaciones Científicas y Técnicas
repository.name.fl_str_mv CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicas
repository.mail.fl_str_mv dasensio@conicet.gov.ar; lcarlino@conicet.gov.ar
_version_ 1846781407451414528
score 12.982451

Publicaciones similares