Quantification of active sites for the determination of methanol oxidation turn-over frequencies using methanol chemisorption and in situ infrared techniques. 2 - Bulk metal oxide...
- Autores
- Burcham, Loyd J.; Briand, Laura Estefania; Wachs, Israel E.
- Año de publicación
- 2001
- Idioma
- inglés
- Tipo de recurso
- artículo
- Estado
- versión publicada
- Descripción
- Bulk metal oxide catalysts, especially bulk mixed-metal molybdates such as Fe2(MoO4)3, often exhibit high methanol oxidation activity and selectivity. However, the difficulties involved in determining active surface site densities on these catalysts have, in the past, generally prevented side-by-side comparisons of their intrinsic activities, or turn-over frequencies (TOFs). In the present study, high temperature (110 °C) methanol chemisorption and in-situ infrared spectroscopy have been employed to directly and quantitatively determine the number of active metal oxide surface sites available for methanol oxidation. The IR spectra indicate that methanol chemisorption on these catalysts produces both associatively adsorbed, intact Lewis-bound surface methanol species (CH3OHads, species I) on acidic sites, as well as dissociatively adsorbed surface methoxy species (-OCH3, species II) on less acidic or basic sites. In fact, the Lewis acidity of bulk mixed-metal molybdates relative to the methanol probe molecule was found to decrease as follows: Fe2(MoO4)3, NiMoO4 (species I predominates) > MnMoO4, CoMoO4, ZnMoO4, Al2(MoO4)3 > Ce(MoO4)2 > Bi2Mo3O12 > Zr(MoO4)2 (species II predominates). It also appears that Mo cations are the primary methanol chemisorption sites in many of the bulk mixed-metal molybdates, including commercially important Fe2(MoO4)3. By quantifying the surface concentrations of the adsorbed methoxylated reaction intermediates from the IR spectra, it was then possible to normalize the catalytic methanol oxidation activities for the calculation of TOFs. The methanol oxidation TOFs of bulk molybdates were shown to be relatively similar to those of model supported catalysts with the same co-cation (e.g., MoO3/NiO vs NiMoO4)-possibly due to the formation of a "monolayer" of surface molybdenum oxide species on the surfaces of the bulk metal molybdates. In addition, the bulk mixed-metal molybdates were found to exhibit the same ligand effect as that discovered previously in supported metal oxide catalysts, in which the TOF generally decreases with increasing ligand cation electronegativity due to electronic variations in localized M-O-Ligand bonds.
Fil: Burcham, Loyd J.. Lehigh University; Estados Unidos
Fil: Briand, Laura Estefania. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata. Centro de Investigación y Desarrollo en Ciencias Aplicadas "Dr. Jorge J. Ronco". Universidad Nacional de la Plata. Facultad de Ciencias Exactas. Centro de Investigación y Desarrollo en Ciencias Aplicadas; Argentina
Fil: Wachs, Israel E.. Lehigh University; Estados Unidos - Materia
-
Surface Science
Methanol Adsorption
Surface Active Sites - Nivel de accesibilidad
- acceso abierto
- Condiciones de uso
- https://creativecommons.org/licenses/by-nc-sa/2.5/ar/
- Repositorio
- Institución
- Consejo Nacional de Investigaciones Científicas y Técnicas
- OAI Identificador
- oai:ri.conicet.gov.ar:11336/61990
Ver los metadatos del registro completo
id |
CONICETDig_04b0d0b75621a47a6899cc2ff30eaf65 |
---|---|
oai_identifier_str |
oai:ri.conicet.gov.ar:11336/61990 |
network_acronym_str |
CONICETDig |
repository_id_str |
3498 |
network_name_str |
CONICET Digital (CONICET) |
spelling |
Quantification of active sites for the determination of methanol oxidation turn-over frequencies using methanol chemisorption and in situ infrared techniques. 2 - Bulk metal oxide catalystsBurcham, Loyd J.Briand, Laura EstefaniaWachs, Israel E.Surface ScienceMethanol AdsorptionSurface Active Siteshttps://purl.org/becyt/ford/2.4https://purl.org/becyt/ford/2Bulk metal oxide catalysts, especially bulk mixed-metal molybdates such as Fe2(MoO4)3, often exhibit high methanol oxidation activity and selectivity. However, the difficulties involved in determining active surface site densities on these catalysts have, in the past, generally prevented side-by-side comparisons of their intrinsic activities, or turn-over frequencies (TOFs). In the present study, high temperature (110 °C) methanol chemisorption and in-situ infrared spectroscopy have been employed to directly and quantitatively determine the number of active metal oxide surface sites available for methanol oxidation. The IR spectra indicate that methanol chemisorption on these catalysts produces both associatively adsorbed, intact Lewis-bound surface methanol species (CH3OHads, species I) on acidic sites, as well as dissociatively adsorbed surface methoxy species (-OCH3, species II) on less acidic or basic sites. In fact, the Lewis acidity of bulk mixed-metal molybdates relative to the methanol probe molecule was found to decrease as follows: Fe2(MoO4)3, NiMoO4 (species I predominates) > MnMoO4, CoMoO4, ZnMoO4, Al2(MoO4)3 > Ce(MoO4)2 > Bi2Mo3O12 > Zr(MoO4)2 (species II predominates). It also appears that Mo cations are the primary methanol chemisorption sites in many of the bulk mixed-metal molybdates, including commercially important Fe2(MoO4)3. By quantifying the surface concentrations of the adsorbed methoxylated reaction intermediates from the IR spectra, it was then possible to normalize the catalytic methanol oxidation activities for the calculation of TOFs. The methanol oxidation TOFs of bulk molybdates were shown to be relatively similar to those of model supported catalysts with the same co-cation (e.g., MoO3/NiO vs NiMoO4)-possibly due to the formation of a "monolayer" of surface molybdenum oxide species on the surfaces of the bulk metal molybdates. In addition, the bulk mixed-metal molybdates were found to exhibit the same ligand effect as that discovered previously in supported metal oxide catalysts, in which the TOF generally decreases with increasing ligand cation electronegativity due to electronic variations in localized M-O-Ligand bonds.Fil: Burcham, Loyd J.. Lehigh University; Estados UnidosFil: Briand, Laura Estefania. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata. Centro de Investigación y Desarrollo en Ciencias Aplicadas "Dr. Jorge J. Ronco". Universidad Nacional de la Plata. Facultad de Ciencias Exactas. Centro de Investigación y Desarrollo en Ciencias Aplicadas; ArgentinaFil: Wachs, Israel E.. Lehigh University; Estados UnidosAmerican Chemical Society2001-10info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionhttp://purl.org/coar/resource_type/c_6501info:ar-repo/semantics/articuloapplication/pdfapplication/pdfhttp://hdl.handle.net/11336/61990Burcham, Loyd J.; Briand, Laura Estefania; Wachs, Israel E.; Quantification of active sites for the determination of methanol oxidation turn-over frequencies using methanol chemisorption and in situ infrared techniques. 2 - Bulk metal oxide catalysts; American Chemical Society; Langmuir; 17; 20; 10-2001; 6175-61840743-7463CONICET DigitalCONICETenginfo:eu-repo/semantics/altIdentifier/doi/10.1021/la010010tinfo:eu-repo/semantics/altIdentifier/url/https://pubs.acs.org/doi/abs/10.1021/la010010tinfo:eu-repo/semantics/openAccesshttps://creativecommons.org/licenses/by-nc-sa/2.5/ar/reponame:CONICET Digital (CONICET)instname:Consejo Nacional de Investigaciones Científicas y Técnicas2025-09-10T13:07:24Zoai:ri.conicet.gov.ar:11336/61990instacron:CONICETInstitucionalhttp://ri.conicet.gov.ar/Organismo científico-tecnológicoNo correspondehttp://ri.conicet.gov.ar/oai/requestdasensio@conicet.gov.ar; lcarlino@conicet.gov.arArgentinaNo correspondeNo correspondeNo correspondeopendoar:34982025-09-10 13:07:24.979CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicasfalse |
dc.title.none.fl_str_mv |
Quantification of active sites for the determination of methanol oxidation turn-over frequencies using methanol chemisorption and in situ infrared techniques. 2 - Bulk metal oxide catalysts |
title |
Quantification of active sites for the determination of methanol oxidation turn-over frequencies using methanol chemisorption and in situ infrared techniques. 2 - Bulk metal oxide catalysts |
spellingShingle |
Quantification of active sites for the determination of methanol oxidation turn-over frequencies using methanol chemisorption and in situ infrared techniques. 2 - Bulk metal oxide catalysts Burcham, Loyd J. Surface Science Methanol Adsorption Surface Active Sites |
title_short |
Quantification of active sites for the determination of methanol oxidation turn-over frequencies using methanol chemisorption and in situ infrared techniques. 2 - Bulk metal oxide catalysts |
title_full |
Quantification of active sites for the determination of methanol oxidation turn-over frequencies using methanol chemisorption and in situ infrared techniques. 2 - Bulk metal oxide catalysts |
title_fullStr |
Quantification of active sites for the determination of methanol oxidation turn-over frequencies using methanol chemisorption and in situ infrared techniques. 2 - Bulk metal oxide catalysts |
title_full_unstemmed |
Quantification of active sites for the determination of methanol oxidation turn-over frequencies using methanol chemisorption and in situ infrared techniques. 2 - Bulk metal oxide catalysts |
title_sort |
Quantification of active sites for the determination of methanol oxidation turn-over frequencies using methanol chemisorption and in situ infrared techniques. 2 - Bulk metal oxide catalysts |
dc.creator.none.fl_str_mv |
Burcham, Loyd J. Briand, Laura Estefania Wachs, Israel E. |
author |
Burcham, Loyd J. |
author_facet |
Burcham, Loyd J. Briand, Laura Estefania Wachs, Israel E. |
author_role |
author |
author2 |
Briand, Laura Estefania Wachs, Israel E. |
author2_role |
author author |
dc.subject.none.fl_str_mv |
Surface Science Methanol Adsorption Surface Active Sites |
topic |
Surface Science Methanol Adsorption Surface Active Sites |
purl_subject.fl_str_mv |
https://purl.org/becyt/ford/2.4 https://purl.org/becyt/ford/2 |
dc.description.none.fl_txt_mv |
Bulk metal oxide catalysts, especially bulk mixed-metal molybdates such as Fe2(MoO4)3, often exhibit high methanol oxidation activity and selectivity. However, the difficulties involved in determining active surface site densities on these catalysts have, in the past, generally prevented side-by-side comparisons of their intrinsic activities, or turn-over frequencies (TOFs). In the present study, high temperature (110 °C) methanol chemisorption and in-situ infrared spectroscopy have been employed to directly and quantitatively determine the number of active metal oxide surface sites available for methanol oxidation. The IR spectra indicate that methanol chemisorption on these catalysts produces both associatively adsorbed, intact Lewis-bound surface methanol species (CH3OHads, species I) on acidic sites, as well as dissociatively adsorbed surface methoxy species (-OCH3, species II) on less acidic or basic sites. In fact, the Lewis acidity of bulk mixed-metal molybdates relative to the methanol probe molecule was found to decrease as follows: Fe2(MoO4)3, NiMoO4 (species I predominates) > MnMoO4, CoMoO4, ZnMoO4, Al2(MoO4)3 > Ce(MoO4)2 > Bi2Mo3O12 > Zr(MoO4)2 (species II predominates). It also appears that Mo cations are the primary methanol chemisorption sites in many of the bulk mixed-metal molybdates, including commercially important Fe2(MoO4)3. By quantifying the surface concentrations of the adsorbed methoxylated reaction intermediates from the IR spectra, it was then possible to normalize the catalytic methanol oxidation activities for the calculation of TOFs. The methanol oxidation TOFs of bulk molybdates were shown to be relatively similar to those of model supported catalysts with the same co-cation (e.g., MoO3/NiO vs NiMoO4)-possibly due to the formation of a "monolayer" of surface molybdenum oxide species on the surfaces of the bulk metal molybdates. In addition, the bulk mixed-metal molybdates were found to exhibit the same ligand effect as that discovered previously in supported metal oxide catalysts, in which the TOF generally decreases with increasing ligand cation electronegativity due to electronic variations in localized M-O-Ligand bonds. Fil: Burcham, Loyd J.. Lehigh University; Estados Unidos Fil: Briand, Laura Estefania. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata. Centro de Investigación y Desarrollo en Ciencias Aplicadas "Dr. Jorge J. Ronco". Universidad Nacional de la Plata. Facultad de Ciencias Exactas. Centro de Investigación y Desarrollo en Ciencias Aplicadas; Argentina Fil: Wachs, Israel E.. Lehigh University; Estados Unidos |
description |
Bulk metal oxide catalysts, especially bulk mixed-metal molybdates such as Fe2(MoO4)3, often exhibit high methanol oxidation activity and selectivity. However, the difficulties involved in determining active surface site densities on these catalysts have, in the past, generally prevented side-by-side comparisons of their intrinsic activities, or turn-over frequencies (TOFs). In the present study, high temperature (110 °C) methanol chemisorption and in-situ infrared spectroscopy have been employed to directly and quantitatively determine the number of active metal oxide surface sites available for methanol oxidation. The IR spectra indicate that methanol chemisorption on these catalysts produces both associatively adsorbed, intact Lewis-bound surface methanol species (CH3OHads, species I) on acidic sites, as well as dissociatively adsorbed surface methoxy species (-OCH3, species II) on less acidic or basic sites. In fact, the Lewis acidity of bulk mixed-metal molybdates relative to the methanol probe molecule was found to decrease as follows: Fe2(MoO4)3, NiMoO4 (species I predominates) > MnMoO4, CoMoO4, ZnMoO4, Al2(MoO4)3 > Ce(MoO4)2 > Bi2Mo3O12 > Zr(MoO4)2 (species II predominates). It also appears that Mo cations are the primary methanol chemisorption sites in many of the bulk mixed-metal molybdates, including commercially important Fe2(MoO4)3. By quantifying the surface concentrations of the adsorbed methoxylated reaction intermediates from the IR spectra, it was then possible to normalize the catalytic methanol oxidation activities for the calculation of TOFs. The methanol oxidation TOFs of bulk molybdates were shown to be relatively similar to those of model supported catalysts with the same co-cation (e.g., MoO3/NiO vs NiMoO4)-possibly due to the formation of a "monolayer" of surface molybdenum oxide species on the surfaces of the bulk metal molybdates. In addition, the bulk mixed-metal molybdates were found to exhibit the same ligand effect as that discovered previously in supported metal oxide catalysts, in which the TOF generally decreases with increasing ligand cation electronegativity due to electronic variations in localized M-O-Ligand bonds. |
publishDate |
2001 |
dc.date.none.fl_str_mv |
2001-10 |
dc.type.none.fl_str_mv |
info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion http://purl.org/coar/resource_type/c_6501 info:ar-repo/semantics/articulo |
format |
article |
status_str |
publishedVersion |
dc.identifier.none.fl_str_mv |
http://hdl.handle.net/11336/61990 Burcham, Loyd J.; Briand, Laura Estefania; Wachs, Israel E.; Quantification of active sites for the determination of methanol oxidation turn-over frequencies using methanol chemisorption and in situ infrared techniques. 2 - Bulk metal oxide catalysts; American Chemical Society; Langmuir; 17; 20; 10-2001; 6175-6184 0743-7463 CONICET Digital CONICET |
url |
http://hdl.handle.net/11336/61990 |
identifier_str_mv |
Burcham, Loyd J.; Briand, Laura Estefania; Wachs, Israel E.; Quantification of active sites for the determination of methanol oxidation turn-over frequencies using methanol chemisorption and in situ infrared techniques. 2 - Bulk metal oxide catalysts; American Chemical Society; Langmuir; 17; 20; 10-2001; 6175-6184 0743-7463 CONICET Digital CONICET |
dc.language.none.fl_str_mv |
eng |
language |
eng |
dc.relation.none.fl_str_mv |
info:eu-repo/semantics/altIdentifier/doi/10.1021/la010010t info:eu-repo/semantics/altIdentifier/url/https://pubs.acs.org/doi/abs/10.1021/la010010t |
dc.rights.none.fl_str_mv |
info:eu-repo/semantics/openAccess https://creativecommons.org/licenses/by-nc-sa/2.5/ar/ |
eu_rights_str_mv |
openAccess |
rights_invalid_str_mv |
https://creativecommons.org/licenses/by-nc-sa/2.5/ar/ |
dc.format.none.fl_str_mv |
application/pdf application/pdf |
dc.publisher.none.fl_str_mv |
American Chemical Society |
publisher.none.fl_str_mv |
American Chemical Society |
dc.source.none.fl_str_mv |
reponame:CONICET Digital (CONICET) instname:Consejo Nacional de Investigaciones Científicas y Técnicas |
reponame_str |
CONICET Digital (CONICET) |
collection |
CONICET Digital (CONICET) |
instname_str |
Consejo Nacional de Investigaciones Científicas y Técnicas |
repository.name.fl_str_mv |
CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicas |
repository.mail.fl_str_mv |
dasensio@conicet.gov.ar; lcarlino@conicet.gov.ar |
_version_ |
1842980330907107328 |
score |
12.993085 |